Looking for help with a powershell api connectivity issue. The following code works for all customers, however, for one of the customers, it is returning an error:
var context = new WSManConnectionInfo(new Uri(uri),
"http://schemas.microsoft.com/powershell/Microsoft.PowerShell",
new PSCredential(username, securePassword))
{
SkipCACheck = true,
SkipCNCheck = true
};
using (var pool = RunspaceFactory.CreateRunspacePool(1, counterDefinitions.Count, context))
{
pool.Open();
pool.Open() line returns the following exception:
A first chance exception of type
'System.Management.Automation.Remoting.PSRemotingTransportException'
occurred in System.Management.Automation.dll
Additional information: Processing data from remote server
xxx.xx.xx.xx failed with the following error message: The request for
the Windows Remote Shell with ShellId some-guid-number failed because
the shell was not found on the server. Possible causes are: the
specified ShellId is incorrect or the shell no longer exists on the
server. Provide the correct ShellId or create a new shell and retry
the operation. For more information, see the
about_Remote_Troubleshooting Help topic.
If one is to examine the Intellitrace of the exceptions, the one exception thrown a little higher in the stack is as follows:
"The client cannot connect to the destination specified in the
request. Verify that the service on the destination is running and is
accepting requests. Consult the logs and documentation for the
WS-Management service running on the destination, most commonly IIS or
WinRM. If the destination is the WinRM service, run the following
command on the destination to analyze and configure the WinRM service:
"winrm quickconfig". " (System.Runtime.InteropServices.COMException) A
System.Runtime.InteropServices.COMException was thrown: "The client
cannot connect to the destination specified in the request. Verify
that the service on the destination is running and is accepting
requests. Consult the logs and documentation for the WS-Management
service running on the destination, most commonly IIS or WinRM. If the
destination is the WinRM service, run the following command on the
destination to analyze and configure the WinRM service: "winrm
quickconfig". "
Any thoughts as to what could be the problem? Customer has verified that winrm is running and configured, and that firewall has an open port, etc.
Server is running Windows Server 2012, as a VM on Azure
You may need to configure the TrustedHosts
http://support.microsoft.com/kb/555966
Related
I try to use release pipeline and setup a task "run powershell on target machines"
And here are the error messages:
##[error]Unable to create pssession. Error: 'Connecting to remote server XXX failed with the following error message : The client cannot connect to the destination specified in the request. Verify that the service on the destination is running and is accepting requests. Consult the logs and documentation for the WS-Management service running on the destination, most commonly IIS or WinRM. If the destination is the WinRM service, run the following command on the destination to analyze and configure the WinRM service: "winrm quickconfig". For more information, see the about_Remote_Troubleshooting Help topic.'
##[error]The remote session query failed for XXX with the following error message: The client cannot connect to the destination specified in the request. Verify that the service on the destination is running and is accepting requests. Consult the logs and documentation for the WS-Management service running on the destination, most commonly IIS or WinRM. If the destination is the WinRM service, run the following command on the destination to analyze and configure the WinRM service: "winrm quickconfig".
##[error]PSSession could not be created for Machine:'XXX:5986'
My VM is on Azure, and I already open PORT 5986\5985 in 'internet' settings.
I found some article talking about "remote management", however, I am not sure how to set this up on my VM.
https://learn.microsoft.com/en-us/windows/win32/winrm/portal
https://learn.microsoft.com/en-us/powershell/scripting/learn/remoting/winrmsecurity?view=powershell-7.2
Maybe I need some setup are needed for the instance which pipelines are running on (agent pools)?
https://developercommunity.visualstudio.com/t/with-powershell-on-target-machines-task-cant-able/635225
Any suggestion is appreciated.
Update-1
The suggestion from #wade-zhou-msft seems not working. But thanks!
Updata-2
change the network setting, no more error.
But the situation still the same ...
In addition, my 'copy file to remote machine' task works well.
Update-3
I find articles talks about "how to remotely run powershell command from Linux"
https://adamtheautomator.com/psremoting-linux/
It shows that some setup is needed. Maybe I need to setup the instance running my CD jobs?
The task "run powershell on target machines" will start a Enter-PSSession session from your agent machine to target VM.
As per the error message, on your target VM, please run winrm quickconfig to configure the service, run winrm set winrm/config/client '#{TrustedHosts="*"}' to trust the host.
If you use the HTTPS, then you need to open port 5986 in the firewall and install a self-signed certificate.
If you create a classic virtual machine from the Azure portal,the virtual machine is already set up for WinRM over HTTPS, with the default port 5986 already opened in the firewall and a self-signed certificate installed on the machine.These virtual machines can be accessed with no further configuration required. Please refer to the task perquisite for the detials.
Or you can use self-hosted agent, with http port 5985 for the task.
I had the same problem and I solved the problem by using azure cli.
The build agent and the VM were added in the same vNet.
az vm run-command invoke -g MyResourceGroup -n MyVm --command-id RunShellScript --scripts 'echo $1 $2' --parameters hello world
https://learn.microsoft.com/en-us/cli/azure/vm/run-command?view=azure-cli-latest#az-vm-run-command-invoke
I am trying to change settings on WinRM however I keep getting an error.
I have read many articles across the web about it but I cannot get any of the suggested fixes to work
When I try to get the winRM quickconfig, which is the common suggested fix, to work I get this:
PS C:\Windows\system32> winrm qc
WinRM service is already running on this machine.
WSManFault
Message = The client cannot connect to the destination specified in the request. Verify that the service on the dest
ination is running and is accepting requests. Consult the logs and documentation for the WS-Management service running o
n the destination, most commonly IIS or WinRM. If the destination is the WinRM service, run the following command on the
destination to analyze and configure the WinRM service: "winrm quickconfig".
Error number: -2144108526 0x80338012
The client cannot connect to the destination specified in the request. Verify that the service on the destination is run
ning and is accepting requests. Consult the logs and documentation for the WS-Management service running on the destinat
ion, most commonly IIS or WinRM. If the destination is the WinRM service, run the following command on the destination t
o analyze and configure the WinRM service: "winrm quickconfig".
The service is running and the firewall rules are all set correctly.
I get the same error regardless of what I'm trying to achieve.
E.G.
PS C:\Windows\system32> winrm get winrm/config
WSManFault
Message = The client cannot connect to the destination specified in the request. Verify that the service on the dest
ination is running and is accepting requests. Consult the logs and documentation for the WS-Management service running o
n the destination, most commonly IIS or WinRM. If the destination is the WinRM service, run the following command on the
destination to analyze and configure the WinRM service: "winrm quickconfig".
Error number: -2144108526 0x80338012
The client cannot connect to the destination specified in the request. Verify that the service on the destination is run
ning and is accepting requests. Consult the logs and documentation for the WS-Management service running on the destinat
ion, most commonly IIS or WinRM. If the destination is the WinRM service, run the following command on the destination t
o analyze and configure the WinRM service: "winrm quickconfig".
PS C:\Windows\system32> winrm enumerate winrm/config/listener
WSManFault
Message = The client cannot connect to the destination specified in the request. Verify that the service on the dest
ination is running and is accepting requests. Consult the logs and documentation for the WS-Management service running o
n the destination, most commonly IIS or WinRM. If the destination is the WinRM service, run the following command on the
destination to analyze and configure the WinRM service: "winrm quickconfig".
Error number: -2144108526 0x80338012
The client cannot connect to the destination specified in the request. Verify that the service on the destination is run
ning and is accepting requests. Consult the logs and documentation for the WS-Management service running on the destinat
ion, most commonly IIS or WinRM. If the destination is the WinRM service, run the following command on the destination t
o analyze and configure the WinRM service: "winrm quickconfig".
I have tried stopping and restarting the Windows Remote Management service in the local Services.
Also tried changing the settings in the Group Policy on the machine. All to no avail.
Checked the expanded analysis logs in the event viewer, no further clues there, it just shows the error above.
Is there anyway to uninstall and reinstall ? I cannot find any info on that, online to configure. I don't seem to be able to get back to the initial setup like this (example from another machine)
PS P:\> winrm qc
WinRM is not set up to receive requests on this machine.
The following changes must be made:
Start the WinRM service.
Set the WinRM service type to delayed auto start.
Make these changes [y/n]? n
I am current using :
Windows 2008 R2 SP1
Powershell 5.1
TFS 2017 is also installed on the server.
Any ideas ?
You know... I could point you to some links that would help, but that always aggravates me when I'm looking for an answer. Try this from an elevated powershell prompt:
Set-NetConnectionProfile -NetworkCategory Private <-- This assumes you're not in a domain
Enable-PSRemoting -SkipNetworkProfileCheck -Force <- Yes, a bit redundant
set-service -ServiceName WinRm -StartupType Automatic
start-service winrm
If you continue to have trouble, add this:
winrm set winrm/config/client '#{TrustedHosts="NameOfYourComputer"}'
I was getting this error below:
"Connecting to remote server TESTSERVER01 failed with the following error message : The client cannot connect to the destination specified in the request. Verify that the service on the destination is running and is accepting requests. Consult the logs and documentation for the WS-Management service running on the destination, most commonly IIS or WinRM."
I've following the hundreds of fixes online for this. Nothing works, ideas?
The fix which worked on all my Windows 2012 servers was....
Enabled Powershell Remoting.
Enabled Credentials Negotiating on both servers.
Set trusted hosts to *.mydomain.
Crucial: GPEDIT.MSC -> Computer Configuration -> Administrative Templates -> Windows Components -> Windows Remote Management -> WinRM Service. Key = Allow remote server management through WinRm be set to '*' not empty!
I have a script that builds a VM and installs multiple programs. The script runs on a separate server, and builds the VM by using Invoke-Command to execute commands remotely on the VM server. There are perhaps 20 steps to the process, with each step creating a session, invoking a command on the VM, then removing the session.
Towards the end of the script I'm always getting the error below, but not always on the same step. When I run the script again leaving off where it last failed, it works fine. Obviously Winrm is enabled so I'm at a loss as to what can be causing it.
What possible reasons could explain getting this error when WinRM is most definitely running?
"Processing data for a remote command failed with the following error message: The client cannot connect to the destination specified in the request. Verify that the service on the destination is running and is accepting requests. Consult the logs and documentation for the WS-Management service running on the destination, most commonly IIS or WinRM. If the destination is the WinRM service, run the following command on the destination to analyze and configure the WinRM service: "winrm quickconfig". For more information, see the about_Remote_Troubleshooting Help topic."
It sounds like the 'Web Management Service' is not running on the remote machine.
This service is required for IIS management and some applications.
Regards
I am unable to run winrm qc on my W2K3 R2 server. The WinRM service is running. When I launch quickconfig I get the following error: Error number: -2144108387 0x8033809D
The whole command line error output is:
PS C:\Documents and Settings\admin314> winrm qc
WinRM already is set up to receive requests on this machine.
WSManFault
Message = WinRM cannot process the request. The following error occured while using Negotiate authentication: An unknown security error occurred.
Possible causes are:
-The user name or password specified are invalid.
-Kerberos is used when no authentication method and no user name are specified.
-Kerberos accepts domain user names, but not local user names.
-The Service Principal Name (SPN) for the remote computer name and port does not exist.
-The client and remote computers are in different domains and there is no trust between the two domains.
After checking for the above issues, try the following:
-Check the Event Viewer for events related to authentication.
-Change the authentication method; add the destination computer to the WinRM TrustedHosts configuration setting or use HTTPS transport.
Note that computers in the TrustedHosts list might not be authenticated.
-For more information about WinRM configuration, run the following command: winrm help config.
Error number: -2144108387 0x8033809D
An unknown security error occurred.
The solution is in adding correct SPNs (Service Principal Names). I was missing the HTTP/server1 SPN. So I downloaded the Microsoft Windwos Server 2003 Support Pack and used the "setspn.exe".
First of all I used the list option (setspn.exe -L server1) to see the SPNs (where I discovered that HTTP is missing) and then I added the HTTP option for the desired server (setspn.exe -A HTTP/Server1 Server1 and setspn.exe -A HTTP/Server1.cz Serve1
Hope it will help somebody.
Assuming that you are using PowerShell 2.0, can you try Enable-PSRemoting -Force from an elevated PowerShell console? This performs WinRM quick config and tell you more about the error, if any.
I have seen it fail if the firewall is enabled and running. You can disable the firewall and run winrm qc or do the following manual commands
sc config "WinRM" start= auto
net start WinRM
winrm create winrm/config/listener?Address=*+Transport=HTTP
netsh firewall add portopening TCP 80 "Windows Remote Management"
If you execute this command in Powershell console:
PS C:\Windows\system32> winrm quickconfig
you can get this error:
WinRM cannot process the request. The following error occured while
using Negotiate authentication: An unknown security error occurred.
And you can get this error number:
Error number: -2144108387 0x8033809D
An unknown security error occurred.
This problem occurs because two or more computer accounts have the same service principal name (SPN) registered. Event ID 11 is logged when the Key Distribution Center (KDC) receives a ticket request, and the related SPN exists more than one time when it is checked on the global catalog (GC) for forest wide verification.
Recommended Actions
Check that WinRM is installed and running on server %server. For more information use the command "winrm helpmsg hrresult".
The following event may also be logged in the System event log (eventvwr):
Log Name: System
Source: Microsoft-Windows-Security-Kerberos
Date: 23/04/2009 2:08:30 PM
Event ID: 4
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: %server%.
Description: The Kerberos client received a KRB_AP_ERR_MODIFIED error from the server %server%. The target name used was HTTP/%server%.
This indicates that the target server failed to decrypt the ticket provided by the client. This can occur when the target server principal name (SPN) is registered on an account other than the account the target service is using.
Please ensure that the target SPN is registered on, and only registered on, the account used by the server. This error can also happen when the target service is using a different password for the target service account than what the Kerberos Key Distribution Center (KDC) has for the target service account.
Please ensure that the service on the server and the KDC are both updated to use the current password. If the server name is not fully qualified, and the target domain (DOMAIN.COM) is different from the client domain (DOMAIN.COM), check if there are identically named server accounts in these two domains, or use the fully-qualified name to identify the server.
Keep in mind what you are doing, opening WinRM via HTTP/HTTPS. Check what your server is configured for (80 or 443, or both) and review the SPN's, and add what is needed.
You can download "Microsoft Windows Server 2003 Support Pack" and used the "setspn.exe" command for adding correct SPNs (Service Principal Names).
To review (read only)
setspn.exe -L MACHINENAME
Review the results for HTTP/HTTPS entries (or any duplicates as well) where you discovered that HTTP is missing.
Add missing names:
setspn -A HTTP/machinename
setspn -A HTTP/machinename.fqdn.com
setspn -A HTTPS/machinename
setspn -A HTTPS/machinename.fqdn.com
They reattempt your quickconfig.
More references:
http://blog.chrislehr.com/2012/06/winrm-quickconfig-failing-with.html
http://support.microsoft.com/default.aspx?scid=kb;EN-US;970923
On the off chance anyone has this problem on a Server 2012 or Server 2012 R2 box where they have had to specifically set an IP inclusion list for HTTP, i.e:
netsh http add iplisten 192.168.1.1
you'll need to also add
netsh http add iplisten 127.0.0.1
Posting this here as this page was the 4th result I got when Googling the 'winrm qc' error number I got (Error number: -2144108526 0x80338012) and hoping it saves someone else time in the future.