I have a model in which each agent has an undirected link to all the other agents. What I want to do is increment a count, stored with each link, when two agents share the same patch. In other words to keep a record of social interactions. Thanks for any help.
Assuming:
links-own [counter]
Then here's the shortest solution I can think of:
ask links [
if [patch-here] of end1 = [patch-here] of end2 [
set counter counter + 1
]
]
An alternative approach would be:
ask turtles [
ask turtles-here with [self > myself] [
ask link-with myself [
set counter counter + 1
]
]
]
Related
I use the nw extension in NetLogo to create a network.
My aim is the following:
Check if any turtles are close by
If any turtles are close by (I tried with next 3 patches, but that might change), connect to them + there is an upper limit of possible links
I tried (and, I think, succeeded) to implement the approach, described here. Which means that the upper limit works. However, I am not able to only link to the turtles close by. I also need something to catch the error if no turtle is close by. I tried to use the in-radius command but for some reasons, it doesn't do what I want.
extensions [nw]
breed [ AT1s AT1]
turtles-own [ friends ]
to setup
ca
create-AT1s 20 [
setxy random-xcor random-ycor
set friends 3
set color green
get-radius-friends friends AT1s
]
end
to get-radius-friends [ x AgentT]
let lonely AgentT with [count my-links < x]
let candidates other AgentT with [ any? AgentT in-radius 3 AND count my-links < x ]
let new-links x - count my-links
if new-links > 0 AND any? AgentT in-radius 3
[ let chosen n-of min (list new-links count other candidates) other candidates
create-links-with chosen [ hide-link ]
set candidates other candidates
ask chosen [ if my-links = x [ set candidates other candidates ] ]
]
end
I also found the neighbors and the distance commands but these only consider the immediate surroundings which isn't what I need.
Actually, that's not the best question to pull from if you want to spatially restrict the turtles. And there's a serious problem with having the connection within the turtle creation block because there are no potential friends for the turtles created first. Unless you have a very large number of turtles, you probably don't need to worry about efficiency.
I also think the variable 'x' is unnecessary because you have the variable 'friends' available (which appears to be the number of links you want the turtle to have). And there is a new reporter up-to-n-of which makes the whole list and min unnecessary.
I think this does what you want. You may want to test is without the hide-link so you can see what it does.
breed [ AT1s AT1]
turtles-own [ friends ]
to setup
clear-all
create-AT1s 100
[ setxy random-xcor random-ycor
set friends 3
set color green
]
get-radius-friends 10 AT1s
end
to get-radius-friends [ #radius #breed ]
let linkers turtles with [breed = #breed ]
ask linkers
[ let new-links friends - count my-links
if new-links > 0
[ let candidates other linkers with [ count my-links < friends ] in-radius #radius
let chosen up-to-n-of new-links candidates
create-links-with chosen [ hide-link ]
]
]
end
I have a network of nodes and links. This figure
is a capture of the world. The graph represents streets of a city. I have imported a shapefile with the gis extension. The gray lines are links, black dots are nodes and red dots represent people. The people move heading to the next node. In a street corner, the red dot chooses next street by examining the variable popularity owned by the link.
The links breed has a variable, popularity, whose value I would like to copy in the patches that are below.
If I try, for example, something like this to access patches under links will produce an error
ask links [show [(list pxcor pycor)] of patch-here]
Another approach can be to access links variable popularity from patches, but I do not know how to do it.
The reason why I want this is because I want to write in a file a matrix of popularity values and its position in the matrix should correspond with the position of the link in the world. Thus, the patches below the links would give me the matrix form. I have a procedure that for each patch writes the value of the patch in a file. However, I do not know how to pass the popularityvalue from the link to the patch below it.
Is there any way to copy a link owned variable to its patch?
Regards
If someone has a better way of doing this (or can simplify my code), feel free. Here is a complete working example. Copy it into an empty NetLogo model and run it to see it work.
The setup procedure just creates some nodes and links with appropriate test values and then calls the transfer-link-values procedure, which does what I think you want. The setup procedure then puts the values into the patch labels to display them and see the results.
The way the transfer-link-values procedure works is to create a turtle at one end of the link, and that turtle moves toward the other end of the link transferring the value as it goes. When it gets to the other end, the turtle dies.
patches-own [patch-popularity]
links-own [link-popularity]
to setup
clear-all
create-turtles 10 [ setxy random-xcor random-ycor]
while [ any? turtles with [not any? my-links] ]
[ let to-pair turtles with [not any? my-links]
let thisNode one-of to-pair
ask thisNode
[ create-link-with one-of other to-pair
[ set link-popularity 5 + random 5 ]
]
]
transfer-link-values
ask patches [ if patch-popularity != 0 [set plabel patch-popularity ] ]
end
to transfer-link-values
ask links
[ let start-node one-of both-ends
let this-link self
let end-node nobody
ask start-node [ set end-node [other-end] of this-link ]
let transfer-value link-popularity
ask start-node
[ hatch 1
[ face end-node
if transfer-value > patch-popularity
[ ask patch-here [ set patch-popularity transfer-value ] ]
while [ not member? end-node turtles-here ]
[ forward 1
if transfer-value > patch-popularity
[ ask patch-here [ set patch-popularity transfer-value ] ]
]
if transfer-value > patch-popularity
[ ask patch-here [ set patch-popularity transfer-value ] ]
die
]
]
]
end
I spent all afternoon trying to work out with a part of my code and I don't seem to be getting anywhere. Basically, I'm trying to create a social network on model setup. Each person in the model starts off with a set of people that are nearby to them people-nearby. It is from this set that people choose who to connect with:
create-people population-size
[
set people-nearby turtle-set other people in-radius neighborhood-radius
]
to create-network
let num-links round (average-node-degree * population-size) / 2
while [ count links < num-links and count people with [length sort people-nearby > 0] > 0 ]
[ ask one-of people
[ *... initiate probabilistic link creation process...*
create-unlink-with chosen-friend
Once person A has connected to someone (ie. person B), person B is removed from person A's people-nearby set. I'm having trouble with this portion of the code where the people-nearby set is updated by excluding all nearby people that are members of the unlink-neighbors set (i.e., those to whom person A is already connected - this set including person B):
ifelse count turtle-set people-nearby > 1
[ let nearby-people-not-linked-to-me ( turtle-set people-nearby with [ not member? self [ turtle-set unlink-neighbors ] of myself ] )
set people-nearby nearby-people-not-linked-to-me ]
[ set people-nearby [ ] ]
For some reason this error keeps popping up:
"WITH expected input to be an agentset but got the list [(person 0) (person 1) (person 3) (person 4)] instead." whenever
people-nearby with [ not member? self [ turtle-set unlink-neighbors ] of myself is called.
I looked up so many posts but can't seem to get the form of the argument right so that it stops showing this error.
Can anyone help me fix this please? (Oh and it's my first post so apologies if I haven't set up the issue properly)
When you submit code, try to submit what is needed to recreate your problem- check out the asking help page, and specifically the section on helping others reproduce your problem. As is, I think your problem comes from using turtle-set. That primitive is mostly used to combine agentsets, not to query them. So in your line:
( turtle-set people-nearby with [ not member? self [ turtle-set unlink-neighbors ] of myself ] )
there is an syntax issue related to turtle-set. The error itself is saying that you have not returned an agentset but a list of agents, which behave differently.
If I understand correctly, you want all people to have a variable that contains all people within a radius of themselves: "people-nearby". Then, you want the people to form a link with one of their "neighbor" turtles. Finally, you want the people to update their "people-nearby" variable to exclude the person to whom they just formed a link. Below is some code with comments where I tried to follow those steps- obviously your variables will be different, but it may get you started. Let me know if I need to clarify anything or if I missed a step.
breed [ people person ]
turtles-own [ people-nearby ]
to setup
ca
reset-ticks
create-people 70 [
setxy (random 30 - 15) (random 30 - 15)
]
; do this after all turtles have spawned
ask people [
set people-nearby other people in-radius 3
]
end
to create-links
let num-links 10
;; Create a temporary agentset out of turtles that have people nearby
let turtles-with-neighbors turtles with [ any? people-nearby ]
; ask some number of the temporary agentset:
ask n-of num-links turtles-with-neighbors [
;; This just makes it easy to identify the turtle that causes the link
ask patches in-radius 3 [
set pcolor white
]
; create a link to one of the nearby people
create-link-to one-of people-nearby
; newly set people-nearby to only include turtles in radius
; that are not linked-to from the currently acting turtle
set people-nearby other people in-radius 3 with [ not member? self [ out-link-neighbors ] of myself ]
ask people-nearby [ set size 0.5 ]
]
end
I have breed [walkers walker] which walk roads in a road map represented by links in Netlogo.
The links-own [ guiri-ids ] which I intend to be an turtle-set of walkers that have already walked for the link.
I would like to use this guiri-ids to select, from the set of possible next links, which I call nextlinks, the links that the walker has not been walked before (the new ones).
If all possible links have been walked before then choose one of them.
How could obtain the set of next links which guiri-ids set does not contain myself (the walker) ?.
I am trying this line
let new-nextlinks nextlinks with [ guiri-ids != myself ]
but the keeps taking old paths.
Thank your very much for your help
breed [walkers walker]
links-own [ guiri-ids ]
to test
ca
crt 25 [setxy random-xcor random-ycor]
ask turtles [
create-link-with one-of other turtles
]
create-walkers 10
ask links [set guiri-ids n-of 3 walkers]
ask walkers [walk]
end
to walk
let _next one-of links with [not member? myself guiri-ids]
ifelse (_next != nobody) [
ask _next [set guiri-ids (turtle-set myself guiri-ids)]
] [
;do whatever you wish in this case
]
end
I'm new to NetLogo and am attempting to model home range selection of subsequent colonizers. The model should follow simple steps:
Individual 1 picks a home range (a subset of patches).
When individual 1 is done picking its home range, it hatches new
individual 2.
Individual 2 picks a home range, then hatches individual 3.
Individual 3 picks a home range, and so on.
I'm having trouble figuring out how to get this to work. I can get the first turtle to pick a home range. But the offspring do not. Writing the code numerous ways has only accomplished two unintended outcomes. Either endless new individuals are hatched simultaneously, before the first turtle has a home range, and the new turtles fail to pick a home range. Or, the first turtle picks its home range and hatches a new turtle, but that new turtle doesn't pick a home range. Neither outcome is what I want.
How do I set this up to run as intended, so that hatchlings pick home ranges too? Here is one simplified version of my code:
to setup-turtles
crt 1
[setxy random-xcor random-ycor]
end
to go
ask turtles [pick-homerange]
tick
end
to pick-homerange
while [food-mine < food-required] ;; if not enough food, keep picking patches for home range
[;; code to pick home range until it has enough food; this is working okay
]
[;; when enough food, stop picking home range
hatch 1 fd 20 ;; now hatch 1, move new turtle slightly away
]
end
So it is at this last part, once the home range is built, that I want a new turtle to hatch from its parent. I then want that turtle to repeat the pick-homerange procedure. How could that be coded to happen? I've tried writing this every way I can think of; nothing is working. Thanks in advance for any assistance!
One way to do this is to have each patch equal one "food value", and have turtles grow their home range until their home range supplies them with enough food. I would set this up so that patches "know" to which turtle they belong, and so that turtles know how much food they need, which patches are part of their home range, and the food supplied by their homerange. Example patch and turtle variables would then be:
patches-own [
owned_by
]
turtles-own [
food_required
my_homerange
homerange_food
]
Then, your turtles can add patches into their home range until they hit their "food_required", whatever you set that as. For simplicity, in this example I assume that turtles are territorial and so won't "share" home ranges. Further explanation of steps is commented in the code below. This is intended just to get you started- for example, it will hang if you run pick-homerange too many times.
to setup-turtles
crt 1 [
set size 1.5
setxy random-xcor random-ycor
set food_required 5 + random 5
set homerange_food 0
set my_homerange []
]
end
to pick-homerange
ask turtles [
;; Check if the current patch is owned by anyone other than myself
if ( [owned_by] of patch-here != self ) and ( [owned_by] of patch-here != nobody ) [
;; if it is owned by someone else, move to a new patch that is not owned
let target one-of patches in-radius 10 with [ owned_by = nobody ]
if target != nobody [
move-to target
]
]
;; Now add the current patch into my homerange
ask patch-here [
set owned_by myself
]
set my_homerange patches with [ owned_by = myself ]
;; calculate the number of patches currently in my homerange
set homerange_food count patches with [owned_by = myself]
;; Now grow the homerange until there are enough patches in the homerange
;; to fulfill the "food_required" variable
while [ homerange_food < food_required ] [
let expander one-of my_homerange with [ any? neighbors with [ owned_by = nobody ] ]
if expander != nobody [
ask expander [
let expand_to one-of neighbors4 with [ owned_by = nobody ]
if expand_to != nobody[
ask expand_to [
set owned_by [owned_by] of myself
]
]
]
]
;; Reassess homerange food worth
set my_homerange patches with [ owned_by = myself ]
set homerange_food count patches with [owned_by = myself]
]
ask my_homerange [
set pcolor [color] of myself - 2
]
;; Now that my homerange has been defined, I will hatch a new turtle
hatch 1 [
set color ([color] of myself + random 4 - 2)
]
]
end