I am using Red Hat Linux installed on VMWare ESXi.
I am using putty to access the machine.
I want to install xyz.noarch.rpm package on RHEL system.
When I try the command
rpm -ivh xyz.noarch.rpm
I get an error package already installed.
When I verify the same by using the rpm -q xyz.noarch.rpm.
I get response as package xyz.noarch.rpm is not installed.
I also tried with the uninstalling the same by using the command as rpm -ev xyz.noarch.rpm the also I get the same response as package xyz.noarch.rpm is not installed.
Can anybody help me to sort out the issue?
The file is named xyz.noarch.rpm, but in the database it's just xyz. So try rpm -qi xyz.
i faced a similar issue and found that both installation and removal (erase) was not working for a rpm package that i installed. i tried using
rpm -e --allmatches <package-name>
more info at : http://www.redhat.com/archives/rpm-list/2002-March/msg00138.html
Related
Fatal error: gtkplugin.h: no such file or directory
I am trying to use make to install plugin for pidgin on centos 8 we have seen the above error.
Even after installing gtk,gtk2/3 devel packages we couldn't get the headfile.
The problem is with centos 8 distribution since there is no pidgin-devel package by default yum installation. So with the use of dnf command and enabling powertools we can install it by using the below command:
dnf --enablerepo=powertools install pidgin-devel
Please refer the link
i have a problem to install numactl-libs (or libnuma.so.1) on a ubi7/ubi:latest Docker image to run the db2 installation.
I have built a Docker image for db2 and wanted to test whether the DB2 installation runs successfully.
However, I get the following error message:
Requirement not matched for DB2 database "Server" . Version: "11.1.4.6".
Summary of prerequisites that are not met on the current system:
DBT3609E The db2prereqcheck utility could not find the library file libnuma.so.1.
The image has ubi7/ubi:latest as base image and the following libraries are also installed as follows:
RUN yum install -y libaio numactl-libs libpam.so.0 binutils gcc gcc-c++ ksh numactl && yum clean all
All libraries are successfully installed except numactl-libs (or libnuma.so.1?).
Note: a manual installation of numactl-libs worked without problems and thus the DB2 installation was successful:
ADD http://mirror.centos.org/centos/7/os/x86_64/Packages/numactl-libs-2.0.12-5.el7.x86_64.rpm numactl.rpm
RUN rpm -i numactl.rpm
However, I would like the installation of numactl-libs to be done automatically with e.g. the command yum install -y numactl-libs or another equivalent command.
Unfortunately, an attempt with the command yum install -y libnuma.so.1 or yum install -y libnuma.so.* did not change anything and the same error message was displayed.
Can you please help me? I would be very grateful
Note: in my case a 64-bit version is used.
Update:
Unfortunately even trying to install libnuma-dev and libnuma1 has not changed anything and the error message is still the same .
The output of yum provides libnuma.so.1 is:
Loaded plugins: ovl, product-id, search-disabled-repos,
subscription-manager This system is not registered with an
entitlement server. You can use subscription-manager to register.
No matches found
It seems that the problem is that numactl-libs cannot be installed:
The output of yum install numactl-libs is:
Loaded plugins: ovl, product-id, search-disabled-repos, subscription-manager.
This system is not registered with an entitlement server. You can use subscription-manager to register.
No package numactl-libs available.
Solution:
The problem was fixed and numactl-libs could finally be installed:
After I created a Red Hat user account and registered and subscribed to a system for the Red Hat Customer Portal with Red Hat Subscription Manager, numactl-libs installed without any problems.
To register and subscribe to a system for the Red Hat Customer Portal with Red Hat Subscription Manager.
See the following link: (https://access.redhat.com/solutions/253273)
I added the following line in my Dockerfile before the command yum install numactl-libs:
subscription-manager register --username=[USER_NAME] --password=[PASSWORD] --auto-attach
After these steps the DB2 installation ran without problems.
Thank you very much for your tips and help!
I was installing CM and CDH on CentOS6.9, some errors happended on one of the hosts.
So I want to reinstall cloudera-manager-agent, but failed.
Then I used rpm to reinstall(I had download the rpms), here is the result:
[root#xxx yum.repos.d]# rpm -e cloudera-manager*
error: package cloudera-manager-agent-5.12.0-1.cm5120.p0.120.el6.x86_64.rpm is not installed
error: package cloudera-manager-daemons-5.12.0-1.cm5120.p0.120.el6.x86_64.rpm is not installed
error: package cloudera-manager.repo is not installed
error: package cloudera-manager-server-5.12.0-1.cm5120.p0.120.el6.x86_64.rpm is not installed
error: package cloudera-manager-server-db-2-5.12.0-1.cm5120.p0.120.el6.x86_64.rpm is not installed
[root#vm8034 yum.repos.d]# rpm -U cloudera-manager*
error: cloudera-manager.repo: not an rpm package (or package manifest):
[root#vm8034 yum.repos.d]# rpm -U cloudera-manager*.rpm
package cloudera-manager-daemons-5.12.0-1.cm5120.p0.120.el6.x86_64 is already installed
package cloudera-manager-server-5.12.0-1.cm5120.p0.120.el6.x86_64 is already installed
package cloudera-manager-server-db-2-5.12.0-1.cm5120.p0.120.el6.x86_64 is already installed
package cloudera-manager-agent-5.12.0-1.cm5120.p0.120.el6.x86_64 is already installed
[root#xxx yum.repos.d]# rpm -q cloudera-manager*
package cloudera-manager-agent-5.12.0-1.cm5120.p0.120.el6.x86_64.rpm is not installed
package cloudera-manager-daemons-5.12.0-1.cm5120.p0.120.el6.x86_64.rpm is not installed
package cloudera-manager.repo is not installed
package cloudera-manager-server-5.12.0-1.cm5120.p0.120.el6.x86_64.rpm is not installed
package cloudera-manager-server-db-2-5.12.0-1.cm5120.p0.120.el6.x86_64.rpm is not installed
Try using yum instead of rpm and see if that works:
yum update cloudera-manager*
UPDATE:
Try a yum update. This will search for the available updates of your system and display a list with them. You can check if cloudera is in the list or not.
Then check the official website and see if there is any new version for download:
https://www.cloudera.com/downloads/manager/5-12-0.html
If there is try downloading the package, save it on your server and manually install it:
rpm -Uhv package-version-.rpm
Also you should check the content of /etc/yum.conf for an exclude = option. Usually that's used to exclude certain packages from update. If you find cloudera there, then that's why it will never update that package.
I'm trying to install TSung on CentOS 7, but I'm having trouble installing the dependencies.
When I tried to install perl-RRD-Simple.noarch, yum shows no package available. So I downloaded an RPM file and did:
rpm -ivh perl-RRD-Simple-1.43-1.el5.rf.noarch.rpm
But I got an error:
error: Failed dependencies:
perl(RRDs) is needed by perl-RRD-Simple-1.43-1.el5.rf.noarch
How can I install the perl-RRD-Simple package? RRDtool is already installed.
RRD::Simple depends on RRDs.pm, the Perl bindings for RRDtool. RRDs.pm is in the rrdtool-perl package; on CentOS 7, rrdtool-perl is in the base repo, so you can just do:
yum install rrdtool-perl
You'll also need to find a different perl-RRD-Simple RPM, since perl-RRD-Simple-1.43-1.el5.rf.noarch.rpm is for EL5. The only one I can find for EL7 is here.
Alternatively, you can build your own RPM.
As the title says I am trying to install the perl module perl-Net-SSH2. I have tried via yum but get an error that no package is available.
yum install perl-Net-SSH2
I have tried by downloading an rpm file but the only one I can find is for el6 and it complains about the version of perl
yum localinstall perl-Net-SSH2-0.45-4.el6.x86_64.rpm
Requires: perl(:MODULE_COMPAT_5.10.1)
I have tried downloading the source code but get told "Unable to find a working version of library ssh2 in the following directories" even though it is installed. (via yum install libssh2 libssh2-devel)
I have tried via cpan but get the same error "Unable to find a working version of library ssh2 in the following directories"
Any ideas? Google is very sketchy on this and only
OK, I solved this while writing the question. Seeing as information on this is limited I thought it would be worth posting the question anyway. The error message was giving the wrong information in that it was actually gcc that was missing, not libssh2. These are the steps I followed. I've tried to make it as verbatim as possible. I have not verified all these modules are required but this is what I installed before compiling it.
yum install libssh2 libssh2-devel
yum install openssl openssl-devel
yum install perl-Net-SSLeay
yum install gcc
Search for Net::SSH2 in google
Click the link "Net::SSH2 - search.cpan.org"
Download source code (tar.gz file)
Copy it to your redhat 7 machine
tar -xvf Net-SSH2-0.62.tar.gz
cd Net-SSH2-x.xx
perl Makefile.PL
make
make install
Should all be working now, test it with
perl -e 'use Net::SSH2;'