anybody can help me figure out why the installation is hanging on 'Generating installed device list' and how to solve it without starting the process all over. I am working on CentOs.
Thanks in advance
I think this happens due to following missing packages:
libstdc++6:i386
libgtk2.0-0:i386
dpkg-dev:i386
ncurses5-compat-libs
python3-pip
libtinfo5
libncurses5
As BKN mentioned, you need to install the missing packages.
To avoid starting all over again, you can do the following:
Check the log: cat ~/.Xilinx/xinstall/*.log
Locate the error message. It should look something like:
2022-01-09 10:53:11,458 DEBUG: n.t:? - Executing script Generating installed device list: /tools/Xilinx/Vivado/2021.2/bin/vivado [-nolog, -nojournal, -mode, batch, -source, /tools/Xilinx/Vivado/2021.2/scripts/sysgen/tcl/xlpartinfo.tcl, -tclargs, /tools/Xilinx/Vivado/2021.2/data/parts/installed_devices.txt]
2022-01-09 12:05:35,319 DEBUG: n.t:? - Unable to run GenerateDevListFileLin, exit code: 130, stdout: , stderr: application-specific initialization failed: couldn't load file "librdi_commontasks.so": libtinfo.so.5: cannot open shared object file: No such file or directory failure msg:
application-specific initialization failed: couldn't load file "librdi_commontasks.so": libtinfo.so.5: cannot open shared object file: No such file or directory
2022-01-09 12:05:35,319 DEBUG: n.t:? - Executing script Generating installed device list for Model Composer: /tools/Xilinx/Vivado/2021.2/bin/vivado [-nolog, -nojournal, -mode, batch, -source, /tools/Xilinx/Model_Composer/2021.2/data/xmcGenBoardParts.tcl, -tclargs, /tools/Xilinx/Model_Composer/2021.2/../../Vivado/2021.2, librdi_dsp_tcltasks.so, /tools/Xilinx/Model_Composer/2021.2/data]
The log informs you exactly what the missing package is (in this case it was libtinfo), and also provides you with the script to run after you install the package:
/tools/Xilinx/Vivado/2021.2/bin/vivado -nolog -nojournal -mode batch -source /tools/Xilinx/Vivado/2021.2/scripts/sysgen/tcl/xlpartinfo.tcl -tclargs /tools/Xilinx/Vivado/2021.2/data/parts/installed_devices.txt
Notes:
Make sure to use the Vivado version (here it was 2021.2) and location (here it was /tools/Xilinx) according to your system.
You may need to run the script in sudo if the the permissions for writing are not available in user mode.
I also encounterd this problem on Archlinux with Vivado 2018.3.
But I just installed the library ncurses5-compat-libs, then the problem is solved.
Perhaps you can solve this by checking the library ncurses5-compat-libs.
Download the tar package instead of the self-extracting bin package
Update the java and python version
sudo apt-get install -y python3-pip
Install Dependencies
sudo apt-get install -y libstdc++6
sudo apt-get install -y libgtk2.0-0
sudo apt-get install -y dpkg-dev
NOTE: Without ibtinfo5 the application will not start and without libncurses5 the simulation will fail
`sudo apt-get install -y libtinfo5 libncurses5`
Restart the system
Untar that Vivado package
tar -xzvf Xilinx_Unified_2021.2_1021_0703.tar.gz
Locate the xsetup file in the package
Install the package in batch mode
./xsetup --agree 3rdPartyEULA,XilinxEULA --batch Install --product "Vivado" --edition "Vivado ML Enterprise" --location "/home/USER"
Once the installation has been successfully completed
Locate the settings64.sh file
./settings64.sh
Locate the cable drivers
cd Vivado/2021.2/data/xicom/cable_drivers/lin64/install_scripts/install_drivers
./install_drivers
Installing Vivado Board Files
Get the board package from the git https://github.com/Digilent/vivado-boards.git
From the vivado-board-master package copy the folder board_files undert /vivado-board-master/new/board_files
Paste the board files to Vivado/2021.2/data/boards
From the vivado-board-master package copy the file Vivado_init.tcl under /vivado-board-master/utility
Paste the file Vivado_init.tcl to the Vivado installation
That's it!! You might not need to do all these steps but that is what I ended up doing and it worked for the two machines where I installed Vivado. The installation took less than one hour.
This was originally edited into the question itself by the OP.
i am trying to install some module like: "praw" and "discord" but after using this command: pip install praw in vs code's terminal and after when i run the file, i got a error saying that No module named 'praw' i have searched the entire internet that how to install a module in vs code and about this error. pls help if you know.
Thanks
If you have python3 you could try py -3 -m pip install praw or python3 -m pip install praw
edit: If this doesn't works in vscode then try running cmd as admin.
I'm trying to stream data automatically from PostgreSQL 10 to Kafka using debezium together with the logical decoding plugin, wal2json.
I followed all the instructions on how to build and install the plugin from this link by running these command lines:
$ git clone https://github.com/eulerto/wal2json.git
$ cd wal2json
$ PATH=/usr/lib/postgresql/10/bin:$PATH
$ USE_PGXS=1 make
$ USE_PGXS=1 sudo make install
Yet, the steps for installation include this command line: USE_PGXS=1 make and it requires the installation of this package
sudo apt-get install postgresql-server-dev-10
else, I get the following error
Makefile:10: /usr/lib/postgresql/11/lib/pgxs/src/makefiles/pgxs.mk: No such file or directory
make: *** No rule to make target '/usr/lib/postgresql/11/lib/pgxs/src/makefiles/pgxs.mk'. Stop.
In fact, I am not allowed to install the package postgresql-server-dev-10 for personal reasons.
Thus, is there any way to install wal2json without installing that package or without using the command make?
Thank you.
I'm trying to build a postgres database adapter (luapgsql) as part of my setup:
install:
- sudo luarocks install --server=http://rocks.moonscript.org/dev luapgsql
But the build can't find libpq-fe.h:
Error: Could not find expected file libpq-fe.h, or libpq-fe.h for PQ --
you may have to install PQ in your system and/or pass PQ_DIR or
PQ_INCDIR to the luarocks command. Example: luarocks install luapgsql
PQ_DIR=/usr/local
I've tried what's suggested above, apt-get install libpq-dev and just find \ -name libpq-fe.h. No luck so far. Any ideas where it might be?
So it turns out that running pg_config as part of the install: was the answer. I could read the output in the log.
In the end, the line that worked for me for installing luapgsql on travis is:
sudo luarocks install --server=http://rocks.moonscript.org/dev luapgsql PQ_INCDIR=/usr/include/postgresql PQ_LIBDIR=/usr/lib/x86_64-linux-gnu
The instructions for madge are only good for a linux system (it requires sudo to get the command line part set up). Is there a way to run it on windows?
It turns out to be very simple. To install madge:
npm install madge
Then to set it up for the command line:
npm -g install madge
You can then run it with a command of:
madge
For typescript generate .js files do:
madge -f amd -c .
and you'll get the circular report. You need the "-f amd".