I am trying to run Get-AzureVM PowerShell command, it is running fine but not return any output.
Also tried in following flavor but still blank result any idea?
Get-AzureVM -Name "vmname" |Select-Object name,instancesize,location
You should call Select-AzureSubscription "subscription name" first.
It likely is defaulting to a subscription that doesn't have any virtual machines in it.
To view your current subscription names call:
Get-AzureSubscription | select SubscriptionName
Actually the answer above is only semi-correct.
This had me pulling my virutal hair out trying to do automation (which took 7 hours of manual fudging to get working!).
Simply, you have two types of virtual machine in Azure; Classic, and Resource Manager.
If you Switch-AzureMode -name AzureServiceManagement then use Get-AzureVM you will list all of the classic VM's you have created.
If you Switch-AzureMode -name AzureResourceManager then use Get-AzureVM you will list all of the Resource Manager (or new) VM's you have created.
And remember, if you are trying to do automation, then you need the VM's in the new mode available through the portal, your old VM's (classic) that you created through management are not visable in this mode and you will have to recreate them.
Azure has two types of Management System: AzureServiceManagement (ASM) and AzureResourceManager (ARM)
In order to control these two different type of management systems you should switch between them as described in the main page of the Azure Powershell Github project page, but this is true for the azure powershell versions lower than 1.0.0, you can find more explanation in here
For those who are interested to control ARM (AzureResourceManager) with the powershell version greter than 1.0.0, they should use all Cmdlets with the following format : [Verb]-AzureRm[Noun], for example New-AzureVm becomes New-AzureRmVm, in our case Get-AzureVM became Get-AzureRmVm
In summary:
Powershell versions lower than 1.0.0 you should switch between modes and use Get-AzureVM, which is very confusing in my and lots of others opinion
Powershell versions equal or greater than 1.0.0 you should use Get-AzureVM for ASM and Get-AzureRmVm for ARM.
I know this question has been answered but I tried the answer given and it did not work for me. I found, I needed to switch my AzureMode.
To resolve, I ran the following powershell script.
Switch-AzureMode -Name AzureResourceManager
Switching Azure Powershell mode between AzureServiceManagement and AzureResourceManger is a possible solution if your script is using older features as well as new Azure Resource Manager cmdlets. The switch is needed only for Microsoft Azure Powershell version 0.9.8 or older.
Related
I have a PowerShell script running in Octopus Deploy as part of my deployment process. An extract of the script is below:
Import-AzurePublishSettingsFile "myAzurePublishSetting.PublishSettings"
Select-AzureSubscription 'mySubscription'
Set-AzureSubscription -SubscriptionName 'mySubscription' -Environment 'myEnvironment' -CurrentStorageAccountName 'myStorageAccount'
I'm now getting the below error from the Set-AzureSubscription cmdlet:
ServiceEndpoint and ResourceManagerEndpoint values do not match existing environment. Please use Environment parameter.
at Microsoft.WindowsAzure.Commands.Profile.SetAzureSubscriptionCommand.ExecuteCmdlet()
at Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet.ProcessRecord()
Octopus Deploy is hosted in an Azure virtual machine. This script worked fine until a few days ago so maybe Azure has changed something since nothing else has changed.
It's even more puzzling since I can run this script successfully on the virtual machine in both a PowerShell window and using Calamari.exe which is apparently what Octopus uses under the hood to call the script.
Any ideas?
This can happen if you have made changes to Azure subscriptions, for example disabling a subscription. Powershell still has a cache of the previous subscriptions. Use Get-AzureAccount to get the Id of the account and then Remove-AzureAccount. Finally, add the account again using Add-AzureAccount.
I am trying to connect to an Azure Run As connection, as part of a Powershell script that does a backup of a database.
This script attempts to call Get-AutomationConnection
As seen in the screenshot, Get-Module does return that Azure / Azure.Storage and AzureRM shows.
What module should I import in addition for this to work?
If you want to connect to an Azure Run As connection from Windows PowerShell, you should use New-AzureRmAutomationConnection.
$ConnectionAssetName = "AzureRunAsConnection"
$ConnectionFieldValues = #{"ApplicationId" = $Application.ApplicationId; "TenantId" = $TenantID.TenantId; "CertificateThumbprint" = $Cert.Thumbprint; "SubscriptionId" = $SubscriptionId}
New-AzureRmAutomationConnection -ResourceGroupName $ResourceGroup -AutomationAccountName $AutomationAccountName -Name $ConnectionAssetName -ConnectionTypeName AzureServicePrincipal -ConnectionFieldValues $ConnectionFieldValues
You are able to use the script to create the connection asset because when you create your Automation account, it automatically includes several global modules by default along with the connection type AzurServicePrincipal to create the AzureRunAsConnection connection asset.
Get-AutomationConnection runs in Azure runbook internally.
Please refer to connection assets in Azure Automation.
If you want similar functionality to runbooks on-premise, you can install AzureAutomationAuthoringToolkit. It will give you very similar functionality. I have one script that logs in using the service principal, whether it is running on-premise or in an Azure runbook. It uses the resources provided by AAATK when running on-premise, that simulate a runbook.
I did try using the version of Get-AutomationConnection that comes with the "Microsoft Monitoring agent" (Hybrid worker), but I have since read that it is different to the one that comes with AzureAutomationAuthoringToolkit, detailed in the "Known Issues" in the GitHub readme. I couldn't get it to work, so I reverted to AAATK's version.
I am trying to understand difference between two modules, Azure AD and MS Online modules. Currently on my windows 10 machine I can use get-azureaccount cmdlet that returns my current Azure account. And there is bunch of cmdlets that I can use right now. Then why I need MS Online module.
Please help me to understand the purpose of these two modules.
Get-AzureAccount / Get-AzureRMAccount is a part of the "Azure" module.
When working with Azure AD (Active directory commands; not a part of the built-in modules) in Azure you will need the MSOnline module - which also happens to be the same module as for working with Office365. Usually MSOnline is referred to as the Azure Active Directory module for Windows Powershell.
Eg. if you install the Azure Active Directory module from example here: Microsoft - Active Directory Module for Windows Powershell 64-bit - you will get the MSOnline module installed on your machine. You can actually inspect / unpack the msi installer and you will see that the package here is Microsoft.Online.Administration.MSOnline.psd1
In order to work with Azure AD from Powershell, you'll then need to import this module (which contains a set of functions to work with Azure AD).
To list commands within this module after installing the module you can do the following:
Get-Command -Module MSOnline
Hope this clears the confusion.
Connect-Azure: allows user to manage Active Directory objects only, [where directory is hosted in Azure].
Connect-Msoline: apart from managing Active Directory allows more administrative tasks such as Domain management, configure single sign-on etc.
Hope this clarifies your doubt.
Reference
https://learn.microsoft.com/en-us/powershell/module/azuread/connect-azuread?view=azureadps-2.0
https://learn.microsoft.com/en-us/powershell/azure/active-directory/install-msonlinev1?view=azureadps-1.0
In my opinion, it's a matter of selecting the best tool for the job. And the way to select the tool is based on
What you're going to do with it &
what does the tool do
If we take a look at the properties offered by get-msoluser
(get-msoluser)[0] | gm -MemberType Properties
we get a slightly different set than we do when we query get-azureaduser with
(get-azureaduser)[0] | gm -MemberType Properties
and the same can be said when we review the methods available to the objects:
(get-azureaduser)[0] | gm -MemberType Method
or
(get-msoluser)[0] | gm -MemberType Method
Now, since the general idea is to get things done quickly and simply. It then becomes clear to use the one that directly supports what you intend to achieve. And if they both cover the job then I would base my decision of which additional cmdlets in the module support the task I want to achieve without needing to load a whole stack of modules.
So I hope this helps find the right tool for the job.
Have fun,
Porky
I'm trying to move some of my resources (Azure Web Apps, Azure SQLs, Redis caches) from one resource group to another. I'm using the Azure Resource Manager PowerShell cmdlets.
Here's what I've tried:
PS C:\> Move-AzureResource -DestinationResourceGroupName NewResourceGroup -ResourceId "/subscriptions/someguid/resourceGroups/Default-Web-WestEurope/providers/Microsoft.Web/sites/somesite"
Or:
PS C:\> Get-AzureResource -ResourceName somesite | Move-AzureResource -DestinationResourceGroupName NewResourceGroup
Or:
just Move-AzureResource, hitting enter and supplying the parameters one by one.
None of the commands seems to work. They just don't do anything. No error, no output.
When I changed the debug preference to $DebugPreference = "Continue" I got only the following:
DEBUG: 12:16:06 - MoveAzureResourceCommand begin processing with ParameterSet '__AllParameterSets'.
DEBUG: 12:16:06 - using account id 'my#account.tld'...
Please note that I'm able to create a new resource group (New-AzureResourceGroup), list resource groups (Get-AzureResourceGroup), list resources (Get-AzureResource), etc.
Note: you have to call Switch-AzureMode AzureResourceManager before you can use the cmdlets. The authentication is done by Add-AzureAccount.
Articles I've been referring to:
Moving resources between Azure Resource Groups
Move-AzureResource
Using Azure PowerShell with Azure Resource Manager
GitHub - Using Azure PowerShell with Azure Resource Manager
Reading this azure forum it looks like they have implemented the cmdlet but not all resources support being moved yet.
We have released a new powershell cmdlet to move resources across resource groups. Not all resources have support yet, but the "main" ones do like hosted services, virtual machines & storage accounts.
Looking back at the example I was following, this does only use VM's. So based on this I think websites aren't supported yet. That fact that no error or warning is returned for unsupported resources is a bit poor.
Though not all resources are currently supported, I understand the current version - 0.9.1 - does have a bug which means that even a supported resource may not be moved with the symptoms as seen by the author of the question. I understand this is being worked on for the next release, but in the interim (as a temp. work around) the previous powershell cmdlets release of 2 versions ago should work fine. https://github.com/Azure/azure-powershell/releases
The original issue is fixed in the 0.9.4 release. I just tried and it works.
FYI. To move a VM using Move-AzureResourceGroup you need to move the containing cloud service and all its VMs at the same time. For example:
Get-AzureResource -ResourceGroupName OriginalResourceGroup | where { $_.ResourceType -match 'Microsoft.ClassicCompute' } | Move-AzureResource -DestinationResourceGroupName NewResourceGroup
By default, the resources in a cloud service are put in a resource group with the same name as the DNS name of the cloud service.
For some reason, Azure PowerShell Version 1.0 has trouble moving over web apps from one Resource Group to another. If you follow the instrctions below, you will be able to move the web app over via powershell.
Download Azure PowerShell Version 1. The below instructions only work for this version. Type the commands below in order.
1) **Login-AzureRmAccount** (a login window will pop up asking for your azure credentials, type them in)
2) **Get-AzureRmResource -ResourceGroupName "NameOfResourceGroup" -ResourceName "WebAppName"** (if you are moving over a website, you will see 2 files, you need the one that is a resource type of Microsoft.Web/sites)
3) **Get-AzureRmResource -ResourceGroupName "NameOfResourceGroup" -ResourceName "WebAppName" -ResourceType "Microsoft.Web/sites"**
4) Assign value 3 to a variable of your name choice. I Chose $a, so **$a = Get-AzureRmResource -ResourceGroupName "NameOfResourceGroup" -ResourceName "WebAppName" -ResourceType "Microsoft.Web/sites"**
5) **Move-AzureRmResource -DestinationResourceGroup "DestinationResourceGroup" -ResourceId $a.ResourceId**
6) It will ask you if you are sure type "Y" and hit enter.
I have an Azure VM and I'm trying to delete it using Powershell. I also want to remove the disk that that VM OS was on (there are no data disks).
I assume I'm going to need the following two cmdlets:
Remove-AzureVM
Remove-AzureDisk
Here's my code:
$VMs = Get-AzureVM $svcName
foreach ($VM in $VMs)
{
$OSDisk = ($VM | Get-AzureOSDisk)
if ($VM.InstanceStatus -eq "ReadyRole") {
Stop-AzureVM -Name $VM.Name -ServiceName $svcName
}
remove-azurevm -ServiceName $svcName -Name $VM.Name
Remove-AzureDisk -DiskName $OSDisk.DiskName
}
When I execute this the call to Remove-AzureVM returns successfully but the call to Remove-AzureDisk returns an error:
Remove-AzureDisk : BadRequest: A disk with name
XXX is currently in use
by virtual machine YYY running within hosted service
ZZZ, deployment XYZ.
Strange thing is, I can issue the same call to Remove-AzureDisk just a few moments later and it returns successfully.
Its as if the call to Remove-AzureVM is returning too quickly. i.e. Its reporting success before the VM has been fully removed, or before the link to the disk has been removed at any rate.
Can anyone explain why this might be and also how I might work around this problem?
thanks in advance
Jamie
What's happening here is that the Disk that is stored in BLOB storage is locked when in use by a VM. You are removing the VM, but it takes a few moments for the Lease on the BLOB to release. That's why you can remove it a few moments later.
There are a few folks who have written PowerShell to break the lease, or you could use PowerShell to use the SDK (or make direct REST API calls) to check lease status.
I ended up writing a script that creates a VM, clones it, then deletes the clones. As part of that I needed to wait until the lease was released hence if you're experiencing this same problem you might want to check my blog post at http://sqlblog.com/blogs/jamie_thomson/archive/2013/11/04/clone-an-azure-vm-using-powershell.aspx as it'll have some code that might help you.
Regards
Jamie
I puzzled at this for quite a while. Ultimately, I found a different command to do what I thought I was doing with this command. I would recommend the remove-azuredatadisk command to delete a disk, as it automatically breaks the lease.
Get-AzureVM -ServiceName <servicename> -name <vmname> |Remove-AzureDataDisk -lun <lun#> -deletevhd | Update-AzureVM
It will spin for a couple of minutes, but it will give you a success/failure output at the end.
This command just does it, and doesn't give you any feedback about which drive was removed. I would recommend tossing in a get-azuredatadisk first just to be sure of what you deleted.
Get-AzureVM -ServiceName <servicename> -name <vmname> | Get-AzureDataDisk
This is related to Windows Azure: Delete disk attached to non-existent VM. Cross-posting my answer here:
I was unable to use the (2016) web portal to delete orphaned disks in my (classic) storage account. Here is a detailed walk-through for deleteing these orphaned disks with PowerShell.
PowerShell
Download and install PowerShell if you haven't already. (Install and configure Azure PowerShell.) Initial steps from this doclink:
Check that the Azure PowerShell module is available after installing:
Get-Module –ListAvailable
If the Azure PowerShell module is not listed, you may need to import it:
Import-Module Azure
Login to Azure Resource Manager:
Login-AzureRmAccount
AzurePublishSettingsFile
Retreive your PublishSettingsFile.
Get-AzurePublishSettingsFile
Get-AzurePublishSettingsFile launches manage.windowsazure.com and prompts you to download an XML file that you can be saved anywhere.
Reference: Get-AzurePublishSettingsFile Documentation
Import-AzurePublishSettingsFile and specify the path to the file just saved.
Import-AzurePublishSettingsFile -PublishSettingsFile '<your file path>'
Show and Remove Disks
Show current disks. (Reference: Azure Storage Cmdlets)
Get-AzureDisk
Quickly remove all disks. (Credit to Mike's answer)
get-azuredisk | Remove-AzureDisk
Or remove disks by name. (Credit to Remove-AzureDisk Documentation)
Remove-AzureDisk -DiskName disk-name-000000000000000000 -DeleteVHD