autohot key using Text Box and a button - autohotkey

Need a little help with a text box and a button..
I have been trying to experiment with "text box" and a "button"..but am not able to do it... I need to take the "values" from the "textbox" field and append it to the button action. i.e., whatever the input is given by the user... need to append it to a "URL"
Example:
If the user is types in "login" as input in the text field, need to take this input and append it to "http://www.google.com/login"
Before action:
http://google.com
AfterAction:
http://google.com/login
Kindly help
Here is my Code:
Gui, Add, Edit, x162 y80 w140 h30 vUserInput, Type here
Gui, Add, Button, x182 y130 w100 h30 gAction, %"Action1" Action1:=http://www.google.om/
; Generated using SmartGUI Creator 4.0
Gui, Show, x127 y87 h379 w479, New GUI Window
Return
Action1:
Gui, Submit, NoHide
guiControlGet, txtVar,, UserInput
guiControl,, UserInput, %( txt++Action1 )
GuiClose:
ExitApp
return
Thanks and cheers.

Okay, you have a few misconceptions and a LOT of errors.
The use of := -vs- % is one of your misunderstandings.
Also, you neglected to put gAction1 as the goto label for your button. You had gAction, but there was no sub called Action.
Another problem is that you have not placed return at the end of your Action1 label.
That means that after the action is completed, the script will continue on to end the script...
You should really read the AutoHotkey Documentation! It will save you a lot of time and headache. Also, you should look at some simple examples.
However, try the script below. Whatever you type into the box, after you push the button, will be appended to the url.
;Now, it may be easier to define your re-usable variable here like this:
;myurl = http://www.google.com/
myurl := "http://www.google.com/" ;this is exactly same as the previous line
Gui, Add, Edit, x162 y80 w300 h30 r1 vUserInput, Type here
Gui, Add, Button, x182 y130 w100 h30 gAction1, Action1 ;The last parameter is JUST the text on the button
;If you wanted to use a variable for the name instead of straight text, you would do this:
;Gui, Add, Button, x182 y130 w100 h30 gAction, %myurl%
;But what you were trying to do is to *assign* a variable instead of *using* a variable - that is, you CAN'T use action1:=value as the variable name
Gui, Show, x127 y87 h379 w479, New GUI Window
Return
Action1: ;the name of this label is the same as the g-action of your button except without the "g" part.
Gui, Submit, NoHide
guiControlGet, UserInput ;you can simply use the edit control's v-name as the output variable
thisurl = %myurl%%UserInput%
guiControl,,UserInput, %thisurl% ;now set the url back to the control
return ;if you don't put return here, the script will continue on and run the GuiClose label...
GuiClose:
ExitApp
return ;you can have this, but you don't need it here since the script will have ended before it gets run anyway.

Related

Use Enter button for submit, while working normally elsewhere

I have a script that opens a GUI with a simple interface, which closes with Esc, and submits through the button. The script always runs in the background. I'm trying to find a way to make the Enter key work as a submit, but while still working normally everywhere else. I've tried using IfWinActive, but it doesn't work. Any ideas? thanks! (btw some of the code looks messy in this format, but the "unnecessary details" are there because this isn't the full script.)
Lwin & MButton::
Goto, Start
return
Start:
IfWinNotExist, New
{
Gui,1:-border
gui, font, s24, Product Sans ; Set 10-point Product Sans.
Gui, Add, Text,, Type here to search: ;controls the UI
Gui, Add, Edit, vTextInput
Gui, Add, Button, -WantReturn gSubmit w80, Go
Gui, Show, w400 h300, New
IfWinExist, New
Hotkey, Enter, Submit, On
return
}
Else
Return
IfWinExist, New
Esc::Gui, Destroy
return
IfWinExist, New
Enter::
Goto, Submit
return
Submit:
Gui, Submit ;destroys the UI when submitted
GuiControlGet, TextInput
Gui, Destroy
Else
{
link = https://www.google.com/search?q= %TextInput% ;search google
Run, %link%
}
The code really looks like some real horror haha.
So much legacy AHK or stuff that doesn't work. But anyway, can't fix all that since that isn't the full script.
The answer to the actual question is to make your button the default button:
Gui, -Border
Gui, Font, s24, % "Product Sans"
Gui, Add, Text, , % "Type here to search:"
Gui, Add, Edit, vTextInput
Gui, Add, Button, +Default gSubmit w80, % "Go"
Gui, Show, w400 h300, % "New"
return
Submit:
Gui, Submit
Run, % "https://www.google.com/search?q=" TextInput
return
Sure, you could also define your own hotkey, like you tried to, but there's just no reason to when the above is so convenient.

How to make it so you could change the hotkey in the GUI? - AutoHotkey

Code:
Gui, Add, Text,, ------------------------------------------Key Delay------------------------------------------
Gui, Add, Edit, w300 vKeyDelay, 100
Gui, Add, Text,, ------------------------------------------Key Input------------------------------------------
Gui, Add, Edit, R10 w300 vKeyPlayer
Gui, Add, Text,, ------------------------------------------Key Start------------------------------------------
Gui, Add, Edit, w300 vStartKey, F2
Gui, Show
F2::
!F2::
Gui, Submit, Nohide
SetKeyDelay, %KeyDelay%
Send, %KeyPlayer%
return
GuiClose:
ExitApp
The start key is set to F2, i want to make it so people are able to change it to whatever, (F1, F2, F3, A, B, C, 1-10, etc)
How to make it so you could change the hotkey in the gui?
You'd use the Hotkey command to create a hotkey during runtime.
And to choose the hotkey in the gui, the easiest (but not best) option would be the hotkey control.
It's surely the easiest one that's also convenient for the end user, but it doesn't support anything beyond just regular hotkeys. For better approaches, you'd need a custom one.
This was the first custom one I found with a Google search. Haven't used it myself, but it might be good stuff.
A very easy, but powerful, custom one you could also use is just a Edit control. Works very well if you expect your end users to be smart enough to type stuff like !F1, +#k, d & o, or whatever.
Anyway, I'll demonstrate here the usage of the built in hotkey control. Stop reading now if you want to figure it out yourself.
First, create the gui and associate a variable and a g-label to the hotkey control.
Though, I'm going to use a function instead of a label, I don't like writing legacy AHK.
Gui, Add, Hotkey, % "x50 y25 w90 h30 vChosenHotkey gHotkeyChanged"
Gui, Show, % "w200 h100"
Return
Then the g-label HotkeyChanged needs to be defined, and I'll use a function instead of a label, as said above.
HotkeyChanged()
{
global ChosenHotkey
Gui, Submit, NoHide
Hotkey, % ChosenHotkey, MyHotkey, On
}
And when using a function, you have to worry about scopes, which is why global ChosenHotkey is specified.
There I'm telling the function that I'll use a variable defined outside of its scope.
If scopes are something you don't yet know of, and don't yet want to to learn about them, you can write legacy AHK and use a label and forget about all this.
To learn about scopes in programming in general, you can probably find something good from Google.
And to learn about them in AHK specifically, I have a previous answer about them here and here's the relevant documentation page.
Then I get the make the script update its associated variables with Gui, Submit, you already seem to know about this.
And then I get to the Hotkey command.
First parameter takes the hotkey to use, that's stored in the ChosenHotkey variable.
Second parameter a label/function name, or a function object. I'll use a function name MyHotkey.
And in the third parameter On is specified to turn the hotkey on and possibly replace any previous any previous hotkey that was in its place.
Then the function or label MyHotkey needs to be defined:
MyHotkey()
{
MsgBox, % "Hotkey pressed!"
}
And that's it.
If you want to save the previously used hotkey and then use it again when the script is restarted, there are many options all of which basically just boil down the idea of saving the hotkey to some file.
Here's the full script:
Gui, Add, Hotkey, % "x50 y25 w90 h30 vChosenHotkey gHotkeyChanged"
Gui, Show, % "w200 h100"
return
HotkeyChanged()
{
global ChosenHotkey
Gui, Submit, NoHide
Hotkey, % ChosenHotkey, MyHotkey, On
}
MyHotkey()
{
MsgBox, % "Hotkey pressed!"
}
GuiClose()
{
ExitApp
}

Issues with AutoHotKey symbol pasting from GUI

I am new to AHK, and am trying to make a script that opens a GUI with a short list of commonly-used symbols that can be chosen, and then be automatically be pasted.
My code so far:
!+q::
Gui, Add, ListBox, w100 h100, vSymbolChoice, ™|©|°|π|☭|☢|⚠|ツ|•|Ω
Gui, Add, Button, Default, Submit
Gui, Add, Button, default, Cancel
Gui, Show
return
ButtonSubmit:
Gui, Submit
Sleep, 1000
Send, %SymbolChoice%
Gui, Destroy
ButtonCancel:
Gui, Destroy
It creates the GUI and the ListBox but doesn't paste the symbol when I have it selcted and press submit.
Also, is there a better way to detect if a text field is selected than just waiting a second and hoping the user selected the field in that time?
; auto-execute section
; create and show the Gui
Gui, Add, ListBox, w100 h130 vSymbolChoice, ™|©|°|π|☭|☢|⚠|ツ|•|Ω
Gui, Add, Button, Default, Submit
Gui, Add, Button,, Hide ; you can't have two default buttons on a Gui
Gui, Show
return
; Press Alt+Shift+Q to show the hidden Gui after ButtonSubmit or ButtonHide
!+q:: Gui, Show
ButtonSubmit:
GuiControlGet, SymbolChoice ; get the control's contents stored in the variable SymbolChoice (retrieves the ListBox's current selection)
Gui, Submit ; saves the contents of this control to its associated variable SymbolChoice
SendInput, %SymbolChoice%
return
; Hide the Gui
ButtonHide:
Gui, hide
return
; Press ESC or close the Gui to terminate the script
GuiClose:
Esc:: ExitApp
For details see GUI in the documentation.

Paste into custom GUI with AHK

I have been working on this for a while and I have no idea how to fix this issue. I want to create a custom GUI in AutoHotKey (AHK), I would post ont he AHK Forums but I haven't been able to get my account to work so I am posting here (sorry if this is the wrong place). The ideal state is that I can paste in a list of indiscriminate length from a list, it is almost always return delimited, see the picture below. I would be happy with pasting 10 items in. I have built the GUI but I can not paste the values in with the shortcut Ctrl+v. All that happens is the first value goes into the first cell and I cannot figure out how to get the rest to paste in.
I need to be able to read the values into an array in the AHK when I click continue. Thanks for your help in advance. Below is my code to create the GUI.
Gui, Add, Text,, Please add the List that you want (10 Max at once)
Gui Add, Edit, vButton1,
Gui Add, Edit, vButton2,
Gui Add, Edit, vButton3,
Gui Add, Edit, vButton4,
Gui Add, Edit, vButton5,
Gui Add, Edit, vButton6,
Gui Add, Edit, vButton7,
Gui Add, Edit, vButton8,
Gui Add, Edit, vButton9,
Gui Add, Edit, vButton0,
Gui Add, Button, x200 y270 w88 h26 vButton02 gGoCont, Continue
Gui Add, Button, x290 y270 w88 h26 vButton03 gGoQuit, Cancel
Gui Show
return
GoCont:
{
MsgBox %Button1%
MsgBox %Button2%
}
return
GoQuit:
Gui Destroy
return
If you can stand a txt file with one name per line, called "names.txt" in the same folder as your ahk script, try something like this:
Add this to the top (it reads in your names.txt file one line at a time):
Loop, Read, names.txt
x%A_Index% := A_LoopReadLine
START EDIT (per comments):
Alternatively, if you already copied to the clipboard the several names from a spreadsheet or website table or other list, then put it this way:
Loop, parse, Clipboard, `n, `r
x%A_Index% := A_LoopField
Either way,
END EDIT
Then, replace all 10 of your edit box lines with these two lines:
Loop, 10 ; or more?
Gui Add, Edit, vButton%A_Index%, % x%A_Index%
The rest is just as you had it.
Let us know, Have fun,
Big thanks to #PGilm
Gui, PasteGUI:Add, Text,, Please add the Names that you want to Process.
Counter := 0
Loop, parse, Clipboard, `n, `r
{
x%A_Index% := A_LoopField
Counter++
}
Counter--
Loop, %Counter% ; Dynamic List length
Gui PasteGUI:Add, Edit, vButton%A_Index%, % x%A_Index%
Gui PasteGUI:Add, Button, x200 y270 w88 h26 vButton02 gGoCont Default, Continue
Gui PasteGUI:Add, Button, x290 y270 w88 h26 vButton03 gGoQuit, Cancel
Gui, PasteGUI:Show
}
Return
GoCont:
{
Loop, %Counter%
{
CODE TO PROCESS MY EACH NAME
}
MsgBox Done!
Gui Destroy
}
Return
GoQuit:
Gui Destroy
Return
Lastly if I want to add a keyboard shortcut to work then I mapped in one where I put the below line at the top of the code
PasteIn:
{
And then close the bracket at the end of the code and then add the shortcut. (the below can be added to the bottom of the code to work) this uses the Ctrl+v keyboard shortcut.
}
^v:: GoTo, PasteIn

How can I read multiple lines of user input in AutoHotkey?

I have an AutoHotkey script which needs to read multiple lines of employee data from a user.
InputBox, userInput, Employee Records, Please enter employee records. (One per line)
Unfortunately, an InputBox only allows users to enter a single line of text. Trying to add newlines with Enter will instead submit whatever data has been entered.
How can I take in multiple lines of user input in an AutoHotkey script?
This implements a generic multiline input function
F3::MsgBox % MultiLineInput( "Employee Records", "Please enter employee records (One per line):" )
MultiLineInput(title, prompt)
{
static input
input := ""
Gui, Add, Text,, %prompt%
Gui, Add, Edit, w400 h60 vinput
Gui, Add, Button, gokay_pressed, Okay
Gui, Add, Button, cancel X+8 YP+0, Cancel
Gui, Show, Center autosize, %title%
WinWaitClose %title%
return input
okay_pressed:
Gui Submit
Gui Destroy
return
GuiClose:
GuiEscape:
ButtonCancel:
Gui, Destroy
return
}
This demonstrates a multi-line input box
F2::
Gui, Add, Text,, Please enter employee records (One per line):
Gui, Add, Edit, w600 h60 vinput
Gui, Add, Button, gokay_pressed, Okay
Gui, Add, Button, cancel X+8 YP+0, Cancel
Gui, Show, Center autosize, Employee Records
Return
okay_pressed:
Gui Submit
Gui Destroy
MsgBox %input%
Return
GuiClose:
GuiEscape:
ButtonCancel:
Gui, Destroy
return