I need to delete and re-create the SSRS keys.
When attempting to do so via the Configuration manager I get this error
Microsoft.ReportingServices.WmiProvider.WMIProviderException: Value cannot be null.
Parameter name: key
at Microsoft.ReportingServices.WmiProvider.RSWmiAdmin.ThrowOnError(ManagementBaseObject mo)
at Microsoft.ReportingServices.WmiProvider.RSWmiAdmin.DeleteEncryptedInformation()
at ReportServicesConfigUI.WMIProvider.RSReportServerAdmin.DeleteEncryptedInformation()
When attempting do delete via command line
rskeymgmt.exe -d -i MSSQLSERVER
I get an Access is denied error.
Any ideas?
You should try right click on 'cmd', 'Run as administrator'. Opening the console, run the same command you tried.
Related
I recently installed the version 4.4 of MongoDB,I followed all the instructions as in the documentation of mongodb.
As instructed by my tutor I created another folder named 'mongodb'in my pc,inside which I created another folder named 'data' as well.Now i went to the command prompt and entered into the same mongodb folder i created earlier and typed the following command.
C:\Users\Dell\mongodb>mongod --dbpath=data --bind_ip 127.0.0.1
When I press Enter I see an error :
'mongod' is not recognized as an internal or external command,operable program or batch file.
I am totally stuck in this.I even reinstalled mongodb again,but it is not working.
You might have a problem with path in Mongodb. After the installation process ends open a
Command Interpreter with Administrative privileges and run:
"C:\Program Files\MongoDB\Server\4.4\bin\mongo.exe"
Now afterward you can use the 'mongod' Command. If still you are unable go to the pre insatlled Mongodb folder copy the path upto bin .
Now go to :
controlpanel>system and security>system>Advanced system settings.
A dialogue box appears and then at the bottom there is the option for Environment Variables.Click on that.
If Mongodb variable already exit delete that and click on the path option. You might see a new option somewhere around click on that and input box appears.Now paste the copied path in that box and click save/Ok or sth to end the options.
Now you can use the 'mongod' command .
"'put' is not recognized as an internal or external command, operable program or batch file."
I am inputting the following: "put file://C:\FolderName\FileName.csv"
All I need to do is upload a csv from my C drive to the Snowflake cloud. I figured this would be easy, but I can't for the life of me figure out why I keep getting this message.
First, you need to connect to SnowSQL from the command prompt and after that, you will be able to execute the PUT/GET command.
C:> snowsql -a snowflake_accountname -u snowflake_username
snowsql> use Database_name;
snowsql> use schema SCHEMA_NAME;
snowsql> use WAREHOUSE WAREHOUSE_NAME;
snowsql> ls #My_Stage_NAME
snowsql> put file://C:\FolderName\FileName.csv #My_Stage_NAME
Can you show the steps before this command is executed to show how you have logged into Snowsql? This command needs to be run inside Snowsql and the error message seems to suggest your system isn't seeing this.
#JNevill is right - the PUT commands takes the file from local (as you have identified) and places it in a Snowflake internal stage. You can create one of these stages in Snowflake or use some of the automatically provisioned ones for your user or table(s). So if you have created the table "My_tableName" you can make use of the internal stage for this with the reference "#My_tableName" so:
snowsql> put file://C:\FolderName\FileName.csv #My_tableName
Once the file is loaded into the stage then you can use the COPY INTO command to load the data into the table:
https://docs.snowflake.net/manuals/sql-reference/sql/copy-into-table.html#loading-files-from-an-internal-stage
I have to copy few postgres table contents into a CSV file for further processing using Talend.
When I tried
copy table_name to ‘/tmp/export/table_name.csv’ with CSV;
with 'tpostgresqlRow' component, it threw error saying "Need superuser access", which I wouldn't be getting.
As an alternative, I tried "\copy" command as
\\copy table_name to ‘/tmp/export/table_name.csv’ with CSV;"
(first slash is used to escape the other). Still it threw error saying "Syntax error at '\'".
I tried with tpostgresqlBulkExec component as well, which internally uses "copy" command, and it as well threw error saying "Need superuser access".
Is there a way out to execute this postgres "copy" command in bulk using Talend?
Any help would be much appreciated.
The copy command needs access to both the postgres table and the local file system.
I think your problem is caused because you do not have access to the local folder. you need to sort that out, or try a different folder that you know you have access to.
with the same user, if you try linux command
touch /tmp/export/test.csv
you may see an error.
the \copy command will fail because to use that you first need to be using a tool called psql.
I got confirmation from Talend Support Team that tPostgresqlRow component would not support 'COPY' command. I have resolved my case by installing PSQL client and calling the same using tSSH component in Talend to execute the desired 'COPY' commands.
I have been trying to deploy my app into the Fortrabbit servers using the command line. I'm using windows. Here is what I tried :
C:\projects\riwaya>git remote add fort git#git2.eu1.frbit.com:riwaya.git
C:\projects\riwaya>git remote fort
C:\projects\riwaya>ssh u-riwaya#ssh2.eu1.frbit.com
'ssh' is not recognized as an internal or external command, operable program or batch file.
I have watched This Laracast Video and did the same as Jeffrey but it doesn't work ...
Can somebody help ?
Actually you have 2 problems here: First is that you don't have ssh installed, second is that you don't know how to deploy
Install SSH
It seems that ssh is not installed on your computer.
You can install openssh from here : http://openssh.en.softonic.com/download
Generate your key
Than you will have to geneate your ssh-key. There's a good tutorial about this here:
https://help.github.com/articles/generating-ssh-keys#platform-windows
Deploy
To deploy, you just have to push your code over git. Something like this:
git push fort master
If you get permission denied, be sure that you have put your public_key in the dashboard in the git tab.
SSH
The ssh command gives you access to your remote node. You should have received a password by email and now that you have ssh installed, you should be asked for a password when trying to connect. just input that password. If you want to use your private ssh key to connect to your server rather then typing that password, you can follow this : http://fortrabbit.com/docs/how-to/ssh-sftp/enable-public-key-authentication
For Windows, first install the git base from here: https://git-scm.com/downloads
Next, set the environment variable:
Press Windows+R and type sysdm.cpl
Select advance -> Environment variable
Select path-> edit the path and paste the below line:
C:\Program Files\Git\git-bash.exe
To test it, open the command window: press Windows+R, type cmd and then type ssh.
First of all Go to browser and install openssh here: https://github.com/PowerShell/Win32-OpenSSH/releases
Next step, extract rar file into folder and then copy and paste it in your drive.
after that run command: ssh it should work.
Next step is right click on shh in openssh folder and go to properties. Copy the path
and paste it in system variables in edit environment variables.
It will work fine.
TLDR, add this to settings.json
"terminal.integrated.env.windows":
{
"PATH": "C:/Windows/System32/OpenSSH",
},
Just found a case when the integrated terminal hasn't recognized 'ssh' as command, but you tried 'ssh' that was working on external terminals like CMD, git-bash.
That means you didn't add PATH variable to your integrated terminal.
If anyone looking for solution even now, here is how I did it for my Windows 10 machine.
Start > type 'Manage Optional Features'
Add Feature [+]
Look for OpenSSH client & select & install
After successful installation, open (close if already opened) powershell or command prompt and run ssh!
I had this in my Windows services:
C:/Program Files/PostgreSQL/8.4/bin/pg_ctl.exe runservice -N "postgresql-8.4" -D "D:/PostgreSQL/8.4/data" -w
It never finishes executing. But if I did this on the dos shell:
C:/Program Files/PostgreSQL/8.4/bin/pg_ctl.exe start -N "postgresql-8.4" -D "D:/PostgreSQL/8.4/data" -w
Notice that I only changed the "runservice" to "start" and it works just fine.
Any idea?
The command runservice can only be executed by the service manager
in order to fix my localhost windows 7 to start postgres as a service
i used the following command to start the data
pg_ctl -D "C:\Program Files\PostgreSQL\9.1\data" start
Then checked the status for errors
pg_ctl -D "C:\Program Files\PostgreSQL\9.1\data" status
if you get error 1063 , its more than likely permissions, i executed the following command
cacls "C:\Program Files\PostgreSQL\9.1\data" /E /T /C /G postgres:F
then reran the start/status, it showed everything fine, but still service manager would not start the service
So, in Services->postgresql->options->logon i set the log on as the Local system account instead of the postgres user, and voila it worked
this happened to me because i set my data directory to be somewhere the postgres windows user account didn't have access to.
I had this problem in Windows after a system crash. Running the first command showed invalid data in C:\Program Files\PostgreSQL\9.1\data\postmaster.pid. Deleting that file did the trick. Reference.
I faced the same issue after moving manually the database data files (PG_DATA directory) without recreating all the necessary permissions.
Here is how I solved my issue:
1. Check permissions on old PG_DATA directory:
cacls "c:\path\to\old\pgdata\dir"
2. Check permissions on new PG_DATA directory:
cacls "d:\path\to\NEW\pgdata\dir"
3. Compare outputs from 1. and 2.
Find the differences between users and/or permissions then synchronize them.
Nota: I found it easier to use explorer for the synchronization step rather than using cacls directly from the command line.
If you changed pg_hba.conf , maybe you missed somewhere in file. For example there must be CIDR after IP in that file. It must be like 192.168.1.100/32
If you forgot to put 32, then server doesnt restart.
Investigation of startup logs could be a clue. For the case problem is in the pg_hba.conf you could see something like this:
2018-11-13 00:39:34.841 PST [8284] FATAL: could not load pg_hba.conf
2018-11-13 00:39:34.842 PST [8284] LOG: database system is shut down
You need to check your logfiles and the windows eventlog for some hint of what the problem is. If there is nothing at all there, you need to break out something like Process Monitor and get a stacktrace of where it's hung.
I have had this issue in the past, and it was that the installer did not set up the permissions correctly for the user that the service was to run as.
I've also ran into this problem with postgresql throwing and error after trying to initialize the database cluster. After analyzing the log files and running command line scripts for 4 hours I've got the solution to anyone running into this problem for Windows Versions.
This is not a detailed description as to why its happening. I've installed odoo 10, 11, 12 and 13 numerous times on countless client servers and windows systems and this is the first time I've ever ran into this problem. I cant say if its because I have MS VS Enterprise installed and Android Studio on this machine or what. But Below is the easy answer on how to fix it and initialize the cluster and create the database files in the data folder.
Open the data folder for postgresql. - For Odoo installs it will normally be "C:\Program Files (x86)\Odoo 13.0\PostgreSQL" Unless you chose another location when installing.
Remove any or all files from this folder - If not you will get an error when running initdb.exe
Right click the data folder and open up the properties for it. Click on the Security tab and then click the advanced button on the bottom.
You need to change the owner of this folder to openpgsvc. Click Change and type in openpgsvc and click ok. Once done click the check box below saying that you want this change to affect containers with this container as well.
Then on the Permissions tab click the add button on the bottom. You need to add openpgsvc as a user and give this user full rights. Click apply and and ok to close out of all the folder properties.
Now you need to open cmd.exe - Once open we are going to call initdb.exe and pass some values to it as well.
First run chdir and change the working directory to the location of initdb.exe. For me, running odoo 13 on a windows 10 machine the location is this..
"C:\Program Files (x86)\Odoo 13.0\PostgreSQL\bin"
There is one variable that need to be passed as well to make this work here is the list. NEEDS TO BE INCLUDED IN THE CALL TO initdb.exe
Postgres Data Dir: "C:\Program Files (x86)\Odoo 13.0\PostgreSQL\data"
The End Result with the parameter would look like this for my installation:
"C:\Program Files (x86)\Odoo 13.0\PostgreSQL\bin\initdb.exe" -D "C:\Program Files (x86)\Odoo 13.0\PostgreSQL\data"
Hit Enter and let it rip. The output of this command should look like this below.
Cmd.exe running initdb.exe script
Make sure there is no buggy empty file Program at C:\ like C:\Program
In this case, explorer will warn whenever you log on into Windows.
File Name Warning
-----------------
There is a file or folder on your computer called "C:\Program" which
could cause certain applications to not function correctly. Renaming it
to "C:\Program1" would solve this problem. Would you like to rename
it now?
Installing PostgreSQL 10 On Windows 7 (yes the clock is ticking...). I first tried the latest version 11 which completely failed to install... not a good sign for Windows users. Anyway.
Quick answer: Change the account in the Windows Services panel from Network to Local.
Details of my case
During installation I created/selected a data folder in the user profile folder, because obviously the folder suggested by default, within the program folder, wouldn't work, and if it worked it would be a very idea to put data here (I don't know whether it's usual to do that on Unix/Linux, but for Windows it's it's not allowed for a long time).
At the end (when populating the data cluster) I received an error:
Failed to load SQL Modules into database Cluster
but the installation was able to complete. I found two pages about previous error, here and here, but they didn't seem relevant to my case, so I just started pgAdmin and, on the left "browser", saw the server wasn't active.
I tried to start it from here (had to type the main password), but it went inactive immediately again. So I tried to use the Windows services panel to start "postgresql-x64-10", no joy. I copied the command from this panel and pasted it into a Windows console (cmd.exe) where I finally received this
error 1063.
Searching I found this related question, and was convinced the problem was about permissions.
Solution working for my case
In the services panel I changed the account used to start the service from Network Service to Local System as suggested in a comment by #AlexanderRios.
sc create "postgresql-9.2" binPath= "\"C:/Program Files (x86)/PostgreSQL/9.2/bin/pg_ctl.exe\" runservice -N \"postgresql-9.2\" -D \"C:/Program Files (x86)/PostgreSQL/9.2/data\" -w" DisplayName= "postgresql-9.2" start= auto
Try this on CMD run as Administrator
(Add your parameters depend on your version)
Stop all postgres processes
Go to the postgres data folder (C:\Program Files\PostgreSQL\9.6\data)
Delete the postmaster.opts and postmaster.pid files
From the control panel, in administrative
tools and the services console start the postgres service
open pgAdmin III and then in right pane find server then just right click and connect, enter the password. after connected go to the browser and refresh ODOO. Problem solved.
See image to get better understanding