I have two commands which I have to run every time to open an application. How do I create a shortcut for these two commands in one shortcut. Let me give an example:
I have two commands:
D:\spl\v231_CCB\bin>splenviron.cmd -e v231_CCB
D:\spl\v231_CCB\bin>spl start
If I want to run the command 1 first and command 2 second then how do I create the shortcut according on my desktop?
splenviron.cmd -e v231_CCB && spl start
works for windows/ubuntu
If you want a shortcut, you should create a script, bat(windows) or sh(unix) file that will execute the above command. Or, as other smart people said it already, create an alias for this command :)
Create a batch file with this and then click that.
#echo off
pushd "D:\spl\v231_CCB\bin"
call splenviron.cmd -e v231_CCB
call spl start
The execution of spl will depend if splenviron.cmd runs and terminates, or keeps running.
Related
I am debugging a windows process that crashes if the execution stops for even a few milliseconds. (I don't know how many exactly, but it is definitely less than the time taken by my reflexes to resume the process.)
I know I can launch a windbg session via the command prompt by typing in windbg -p PID which brings up the GUI. But can I then further pass it windbg commands via the command prompt, such as bm *foo!bar* ".frame;gc";g".
Because If I can pass it these commands I can write these down in a .bat file and just run it. There would at least be no delay due to entering (or even copy-pasting) the commands.
Use the -c parameter to pass them:
windbg -p PID -c "bm *foo!bar* .frame;gc;g"
According to the help (found by running windbg /?):
-c "command"
Specifies the initial debugger command to run at start-up. This command must be enclosed in quotation marks. Multiple commands can be separated with semicolons. (If you have a long command list, it may be easier to put them in a script and then use the -c option with the $<, $><, $><, $$>< (Run Script File) command.)
If you are starting a debugging client, this command must be intended for the debugging server. Client-specific commands, such as .lsrcpath, are not allowed.
You may need to play around with the quotes...
Edit: Based on this answer, you might be better off putting the commands into a script file to deal with the quotes:
script.txt (I think this is what you want):
bm *foo!bar* ".frame;gc"
g
Then in your batch file:
windbg -p PID -c "$<full_path_to_script_txt"
I am aware that one can do
doskey /history
to save the command history at a particular point in time, but I wonder if there's a way to proactively save command history to a file, as the commands are being issued.
Once a command prompt is closed, the history is lost, so it's easy to accidentally close a command prompt when one is done.
I'd like to be able to say something like:
log Commands.log
and then issue my commands, and have the commands be saved to Commands.log.
You could create a doskey macro to remap the EXIT command, as follows:
doskey exit=doskey/history$g$gc:\temp\commands.log$texit $1 $2
This would append the contents of your command history into a file named "c:\temp\commands.log" each time you exit the prompt by typing "exit".
CAUTION: I haven't tested potential side effects of using this with EXIT's "/B exitCode" parameters, but there shouldn't be any since you're capturing the parameters with "$1 $2" anyway.
This doesn't do exactly what you're looking for, but it does capture your command history as long as you exit using EXIT (vs. just closing the window).
More info and samples on DOSKEY macros are here:
http://technet.microsoft.com/en-us/library/bb490894.aspx
I know it is late but I can see two alternatives.
Firt clink or something more complete that include cmder
Each time you will open cmd it will be clink and it works great
As Novy has already said, try Clink; but also use the following link so it also works in admin mode.
run cmd with clink as administrator in windows to save your command history permanently
I have a executable that when double clicked opens in a command line window.
Now there is a input file (i.e named "sphere_15000.inp") in the same directory where the executable apame_win64.exe is located. So we can inter the file name in the command line.
The question is how this can be done from mathematica front end? With the RunThrough command I tried to do it with no avail.
RunThrough["Executable Location", "sphere_15000"]
Do I need to put this file location in my Windows 7 environment path variable? Hope for some suggestion in this regard.
UPDATE
Found a solution to my problem.
First set the Mathematica directory to the folder where the executable is located.
path="C:\Users\FlowCrusher\Desktop\CUSP solver\Apame_build_2011_01_09\solver";
SetDirectory[path];
Then use the following style of input.
Run["\"\"apame_win64.exe\" \"input\"\""]
Here "apame_win64.exe" is the executable one want to run and "input" is the input file for the executable. This solves the problem. But a new item in the wishlist.
Is there a way to hide the console window in the background?
Here is how it looks on my screen.
As Chris suggested if we use minimized console in the Run command we get a minimized window but the program does not execute.
I hope that a solution exists.
BR
Yes, you might put the folder of you executable into the Path variable, or provide the full path name.
However, RunThrough seems to have been superseeded (on Windows) by
Import["!command ","Text"], which will execute command and read the comaand line output into Matheamtica as a string.
E.g.:
Export["testit.txt", "bla", "Text"];
Import["!dir" <> " testit* > dir.log", "Text"];
FilePrint["dir.log"]
--
Otherwise, I also had good results in the past using NETLink (not sure if WScript.shell
still works on Windows7/8 or if one should use something else).
Emulating Run (RunThrough is not really needed I think):
Run2[cmd_String] := Module[{shell},
Switch[$OperatingSystem,
"Windows",
Needs["NETLink`"];
shell = NETLink`CreateCOMObject["WScript.shell"];
shell # run[cmd,0,True],
"Unix",
Run # cmd,
"MacOSX",
Run # cmd ] ];
Can you run your application with input from a basic command window instead of the application console? This might be the form of command you would need:
apame_win64 -input sphere_15000.inp
or simply
apame_win64 sphere_15000.inp
You can probably check the available switches by running apame_win64 -help
A multi-part command can be run from Mathematica, e.g.
Run["type c:\\temp\\test.txt"]
Alternatively, also returning output to the Mathematica session:
ReadList["!type c:\\temp\\test.txt", String]
I landed here wanting to run abaqus command line on windows.
The solutions provided here worked out for me (Windows 7, Mathematica 9):
SetDirectory#path;
Run["start /min abaqus job=" <> fileName <> " interactive ask_delete=OFF >> log.txt"]
(Here the abaqus option ask_delete=OFF overwrites an existing simulation results and the >> redirects all the output to a file)
I think, minimizing the window did not run in your case since the executable throws open that window. In that case, this might be of some help
We have a lot of existing batch files that help with the running of different perl and ruby scripts.
A batch file (e.g. test.bat) would normally be invoked like:
$ test
and within the batch file, it will set some settings and finally try to run the corresponding script file (e.g. test.pl) like this:
perl -S "%0.pl" %*
All works with cmd.exe, but today, I decided to switch to PowerShell and found out that it expands the commands. So trying to run "test" will actually run "Full\path\test.bat" and my script would complain that there is no file test.bat.pl.
Is there a way to prevent this command expansion? Rewriting all batch files is not an option.
One way is to call cmd explicitly:
cmd /c test
I have script lets say:
C:\foo.bsh
I want to be able to run this command via the windows run command:
Start -> Run
Windows Key + R
and type something small like 'foo' and hitting return.
However, I do not want a cmd prompt to be visible. This script does some preprocessing for an IDE. I do not want the cmd prompt to be open for the lifetime of the IDE process.
I have tried:
1) Creating a bat file with the following contents:
c:\cygwin\bin\bash --login "C:\foo.bsh" (this fails because it keeps a cmd open)
2) Converting the above bat file to an exe using bat_2_exe_converter (does not make the cmd silent)
thoughts?
EDIT: The solution so far suggests something to type from an actual cygwin shell. I am trying to get a faster solution by having something short I can type in the Windows run command. Also, the nohup command; exit doesn't automatically kill the box - however I can manually kill it without killing the IDE process. The run command accepts shortcuts (.lnk's), bat's, exe's.
Try the run.exe command of cygwin. It is a big install, a complete unix environment for your Windows machine. Suppose you installed it at c:\cygwin\.
No mystery, just run c:\cygwin\bin\run.exe <your command here> and you will have your no dos window execution.
You can run it from any DOS window (run cmd.exe from the start menu). You don't need to run it from cygwin.
To make it easier, append C:\cygwin\bin to your %PATH% env var (My Computer → Properties → Advanced → Environment Variables) (Kudos to Felipe Alvarez comment).
Now you can just type
c:\cygwin\bin\run.exe "C:\foo.bsh"
You must create a link in your Start Menu with this command so will be able to run it with Win-R.
Here is the man page of the runcommand:
$ man run
RUN(1) run 1.3.0 RUN(1)
NAME
run - start programs with hidden console window
SYNOPSIS
run [ -p path ] command [ -wait ] arguments
runcommand [ -p path ] [ -wait ] arguments
DESCRIPTION
Windows programs are either GUI programs or console programs. When
started console programs will either attach to an existing console
or create a new one. GUI programs can never attach to an exiting con‐
sole. There is no way to attach to an existing console but hide it if
started as GUI program.
run will do this for you. It works as intermediate and starts a pro‐
gram but makes the console window hidden.
With -p path you can add path to the PATH environment variable.
Issuing -wait as first program argument will make run wait for program
completition, otherwise it returns immediately.
The second variant is for creating wrappers. If the executable is
named runcommand (eg runemacs), run will try to start the program (eg
emacs).
EXAMPLES
run -p /usr/X11R6/bin xterm
run emacs -wait
runemacs -wait
run make -wait
AUTHORS
Charles S. Wilson
Harold L Hunt II
Jehan Bing
Alexander Gottwald
Version 1.3.0 November 2005 RUN(1)
You can use either...
c:\cygwin\bin\bash -l /path/to/script_to_interpret.sh
...or...
c:\cygwin\bin\bash -l -c /path/to/executable_script.sh
Note: the -l flag tell bash to "act as if it had been directly invoked by login" and use Bash Startup Files. This is important in that it sets your $PATH and other things you rely on when you launch a cygwin terminal. If you don't include -l or --login you will get "command not found" when you try to call anything except of a bash builtin.
The difference between the 2 is like the difference between doing...
bash script_to_interpret.sh
...and...
./executable_script.sh
...in *nix. The former interprets the script using bash. The latter executes the script (only if it has chmod +x executable_script.sh) and interprets it according to its "shebang" line. The latter method is also what you want to do if your executable is not a script at all, like a *nix binary compiled from source.)
It has been bugging me for a while I couldn't find the solution for this, but I finally got the right mix together.
You can simply do the following if you have cygwin on your PATH:
run bash test.js
If cygwin is not on your path, you can do this:
c:\cygwin\bin\run.exe -p /bin bash test.js
If you are looking for more control over the created window (maximize, etc) it looks like you can use cygstart also.
Sources:
- neves answer above (though that wasn't enough by itself for me personally to figure it out)
- http://cygwin.com/ml/cygwin/2008-09/msg00156.html
As the terminal can't close while your script is still running, try the command:
"nohup C:\foo.bsh; exit"
This way your script will be backgrounded and detached from the terminal, and it should exit quickly so the terminal goes away. I think that the window may still 'flash' with this approach, but the results should be better than what you're getting.
I'm running Cygwin64 and the xwin server link points to:
C:\cygwin64\bin\run.exe /usr/bin/bash.exe -l -c /usr/bin/startxwin.exe
This creates an icon AND a notification on the taskbar. I don't like that. The icon is rather useless, the notification has all your menu options from .XWinrc.
So... I wrote a .vbs script to silently run this command and make the icon go away:
Set objShell = CreateObject("WScript.Shell")
objShell.Run("C:\cygwin64\bin\run.exe /usr/bin/bash.exe -l -c /usr/bin/startxwin.exe"), 0
Another imperfect possibility is to run the script via a shortcut and set the shortcut's Run option to "minimized".
Go to the directory where you have installed cygwin(on my machine it is c:/cygwin64/bin)
Once there simply type "bash.exe"