Is there a way to show/hide various panels in Eclipse?
For example, shift-alt-p opens the Package Explorer panel in my setup, but then to close the panel I have to mouse over and close it manually.
Ideally one could toggle show/hide panels in Eclipse with keyboard shortcuts set via prefs > general > keys
Tough on the wrist to go keyboard-mouse-keyboard-mouse all day.
Perhaps I'm missing some magic combo, please enlighten if you have the Nirvana to spare.
Press Ctrl+F7 you will get below pop up.
Traverse or cycle through the views you want to close by pressing F7 key. After selecting the view to be closed in the above pop up release Ctrl key.
Then the view to be closed will be activated.
Go to Window->Preferences type keys in the search box. Check whether any short cut key is assigned to close part. Refer below picture,
In my case it is assigned to Ctrl+W. Once the view is activated press this short cut key to close the view. If any short cut key is not assigned to close part then you can assign new short-cut key for this.
Click on Binding text box(Refer second picture) and assign your own short cut key.
Related
VSCode suggest multiple auto completion options in a list to me. I can navigate the list with the arrow keys, and auto complete using the currently selected item via ENTER. To me, this is counter intuitive, because to navigate with the arrow keys, I have to shift my hand position on the keyboard. I would expect, e.g. TAB to navigate to the next element in the list & hitting ENTER to complete. Is there a shortcut for navigating besides the arrow keys that I am missing?
When using eclipse, I often use the find/replace tool without touching the mouse. I'll press Ctrl+F, type the text I want to find, press tab, type the replacement text, then press Shift+Tab 3 times, to bring focus to the "replace all" button, then I press Space to perform the action and ESC to close the window.
Today, I tried this and tab will only switch between the "find" text box and the "replace with" text box, meaning I have to go to my mouse to perform the "replace all" action, which takes forever (comparatively). I have had this problem before, and thought I recalled a key binding that changes the focus traversal policy for eclipse, but I cant seem to find it now. Googling has turned up nothing, but I don’t think I am searching for the right terms. I don’t think this is OS related, but I am on a Mac.
Thanks in advance!
I finally found this. It was OS related- Mac has a setting to allow tab navigation through buttons.
System Preferences-> keyboard, at the bottom select "all controls"
If you're as lazy as I am, you don't want to go moving your hand every time you need a menu in Eclipse. Is there any way to navigate menus in Eclipse without moving your hands to the mouse or the arrow keys?
I've searched for key bindings for menu navigation (replacing Up/Down/Left/Right), but came up empty.
UPDATE
To clarify, I am familiar with a lot of the features mentioned in the answers, such as "Show Key Assist", and "Quick Access". I've found that the only time I'm ever really moving my hands is to navigate through a list of items, such as the Package Explorer or the Open Resource dialog. I haven't found any alternatives to the arrow keys for these actions.
I like to bind "Show Key Assist", and "Quick Access" to convenient keys, in order to get a list of all menus/commands/views accessible from the context I am currently in.
This isn't really a replacement from ALT+arrows, but it can help reduce the menu exploration you need to do in order to find the right action to launch.
As #VonC mentioned, I'd use Quick Access (CTRL+3) for most commands that don't already have a keyboard shortcut.
You can also use mnemonics to access most menu items. i.e. ALT+F P for print, or ALT+R N for the Run Configurations dialog.
F10 will open the left most menu on most OSes. CTRL+F10 will open the view menu from within a view, and the ruler menu in a text editor. SHIFT+F10 will open a context menu in almost all locations.
PW
If you want to navigate between views of eclipse, you can use Ctrl+F7 & then up/down arrow keys to select the one. For 'Open Resource Dialog', you can use Ctrl+Shift+R.
When Eclipse shows a popup for code completion, how do you change the highlighted option using the keyboard home keys? Currently, if the thing I want is third or fourth on the list of suggestions, I have to use the mouse to select it, or use the arrow keys. Is there a way to use the keyboard home keys/ shortcuts with ctrl/alt to do this?
Arrow keys always work for me. Can you be little more specific as to what perspective, editor, etc?
I get a code completion popup when I press Ctrl + 1 in the Java editor. From then on, I can use the arrow keys to navigate.
I'm assuming you want to select from the code completion menu by X for up and Y for down. Go to Preferences > Keys and bind the commands Line Up and Line Down to X and Y, respectively. Make sure that in the When drop-down you select In Windows.
Note that after the settings are applied, X (Y) also makes the cursor go one line up (down) in the source editor. Personally, I use X = Ctrl+P and Y = Ctrl+N which means I can navigate lines and select entries from the code completion menu without lifting my hands off the keyboard.
Unfortunately, these bindings don't work with other pop-up lists in Eclipse, e.g. quick outline (Ctrl+O) or quick access (Ctrl+3). I'd love to find out how to bind these too.
Suppose I make a method signature change that breaks several callers, and I want to review the call sites manually to update them.
Once I change the signature, my "Problems" view shows, say, a dozen errors.
What keys can I hit to navigate through them while leaving the keyboard focus in the editor for fast fixups?
(It's been a while, but I think the Visual Studio equivalent is F8.)
Note that this question does not duplicate Eclipse: How to go to a error using only the keyboard (keyboard-shortcut)?, as that one seeks to navigate only between markers in the current file. In this case, I want to go to the next error regardless of which file it's in.
("Marker" is the general Eclipse term for errors, warnings, etc.)
The best I've come up with so far is Ctrl + F7 to flip to the Problems view, then ↓ to pick the topmost error, then Enter to go to it (which returns focus to the editor).
Here's a way to move to the next error, regardless of editor, in one keystroke. It's not perfect, but it works until it's fixed in Eclipse.
Open a "Markers" view. Click the down arrow at the top right, and choose "Configure Contents". Uncheck the show all box, and create the view to show only the problems you want to see. You'll probably want to deselect "warnings" and "errors" as well. Save it.
Click the same "Markers" down arrow, and choose "Group By". Select "None". This is important because you don't want the parent tree level nodes to show, otherwise some of your "next" actions will take you to those, which don't represent an error.
In Eclipse -> preferences -> keys, search for "Markers". If there is not a keystroke bound to the Markers view, create one. I use Ctrl + Shift + M
Get a keyboard hotkey tool like AutoHotKey (for PC's) or iKey for the Mac. I'm using iKey, but there are plenty of other Mac tools you can use. In your hotkey tool, define an action for the keystroke you want to use for "next error". I chose the standard CMD + .
For that keystroke/action in your hotkey tool, generate 3 keystrokes in the following order:
Ctrl + Shift + M
Down arrow
Enter
Of course, you'll want to change the first one to whatever you picked for yours. You'll probably want to restrict that action to be executed only when Eclipse is the current application.
Save that, create some compile errors, and test it.
Try Ctrl + 3 for Quick access popup window.
If the "Markers view" is not already visible, then type in "markers", in the searchbox on the popup window. Once you have selected it, it should stay available, when you press Ctrl + 3 the next time around.
I just had the same problem, after refactoring some parts of code. I had a lot of errors in different files and i had to go through all of those.
I used the following solution:
Mark all (relevant) entries in the Problems view.
To do this switch to the Problems view using Ctrl+F7 and select the entries with Shift+↓/↑
You can also select all entries using Ctrl+A
Open the marked errors by pressing ↵.
Every file containing at least one marked error will be opened.
The cursor will automatically select one error/file, as if you open only this specific entry
Fix the errors in the opened file.
Here you can use Ctrl+. to navigate to next error inside this file
Close the file using Ctrl+W when your done.
Eclipse will automatically focus the next file and you can go back to step 3
In my case this solution was much faster then switching to the Problems view each time.
There's an Eclipse bug entered for this that has an attachment that looks like it does what you want.
You could use AutoHotkey:
save the mouse position, send a mouse event to click on the arrow in CDT console and then return the mouse back to it's original location. Record the mouse coords with window spy or use autohotkey's search by image function (first capture the images of two arrows with printscreen into bitmaps).