I would like to export one scalar variable from a Simulink Diagram to the Matlab Workspace.
Although I know that the value of 'Chemin' can be changed during the simulation, I am only interested in exporting the initial value to the workspace; I do not want a TimeSerie variable (like the 'To Workspace' block would do), I only one want scalar value.
Thank you in advance for your help!
I don't think you can do what you want. Everything in Simulink is time-based so you have to save the entire variable as a function of time to the workspace. However, you can add a model callback in StopFcn that extracts just the first value and clears the time-dependent variable from the workspace, e.g.:
chemin_0 = chemin(1); % assuming chemin is the name of the time-dependent variable saved to workspace
clear chemin
The StopFcn callback is executed after the simulation stops.
You can do this pretty easily with an Enabled Subsystem. Make the enable signal false at all times except t=0 by using a constant (=0) and an Initial Condition block (=1), as per the following picture.
Inside the Enabled Subsystem have
with the save format set to be Array. The simout variable will then be a scalar valued number.
Related
Im trying to do some calculations in a Matlab (R2015b) Simulink function block. I use a signal that gives discrete values in 1-minute intervals.
What i want to do is store the signal values of 1 day (1440 values), convert them into a vector and input it in my Matlab function for calculation (getting time between first and last value > x). All while the simulation is running.
Unit delay, and Transport delay blocks wont work because i need all the stored values at once.
Any ideas on this are much appreciated!
Thanks!
You need to add a "To Workspace" block to your simulink diagram. Setting the options as you wish will allow you to save all the outputs in a single vector. You can select the variable's name, and the default is "simout".
Then, after running the diagram, you have the variable you want in the workspace (as if you had typed it in the console). So next, you can call your function with the argument.
I'm a super beginner in Simulink models and control systems.
I have .slx Simulink model for drone dynamics system.
It takes in two inputs (roll cmd, pitch cmd) and outputs velocity x, velocity y, position x, and position y.
From here, it seems like I can open the system by calling
open_system('myModel.slx', 'loadable');
But how do I put inputs and get output values?
Is there a way I can do this in a gui?
EDIT:
Here is the full layout of my model:
When I did
roll_CMD=10;
pitch_CMD=20;
I got a warning saying:
Input port 1 of 'SimpleDroneDynamics/...' is not connected.
How do I feed inputs using port numbers?
How do I get outputs with port numbers? I tried
[vx, vy, px, py] = sim('SimpleDroneDynamics.slx');
and got an error saying
Number of left-hand side argument doesn't match block diagram...
Is there a way to continuously feed inputs at every time step? This being controller module, I think I'm supposed to feed in different values based on output position and velocity.
EDIT2:
I'm using Matlab2017a
About the first two points of your question:
In simulink:
For the inputs you can use a constant block and when you double click the input block you can assign a value, which can be a workspace variable.
To get the outputs to your workspace you can use the simout block (make sure to put Save format to array).
Connect inputs to your simulink model
Connect outputs of your simulink model to the simout blocks.
MATLAB script
clc;
clear all;
roll = 10;
pitch = 20;
sim('/path_to_simulinkmodel.slx')
time = simout(:,1);
velocity_X = simout(:,2);
velocity_Y = simout(:,3);
position_X = simout(:,4);
position_Y = simout(:,5);
About the third point of your question
You can define the duration of your simulation in the block diagram editor. You can put a variable which is defined in the calling script. There are multiple ways of achieving time dependent input variables:
One option I personally don't recommend is using a for-loop and calling the simulink model with a different value of roll and pitch
for i = 1:numberOfTimesteps
roll = ...
...
sim('simulinkModel.slx')
end
A second and more efficient approach is changing the constant blocks to other source blocks like ramp signals or sinusoid signals
First of all Simulink model use main Matlab workspace. So you can change your variables values at command window (or just at your script) and run Simulink model.
There are several ways to initialize this constants for Simulink. One more useful way is to create script containing all your variables and load it at Simulink model starts. You can do it by adding script name in Simulink/Model Explorer/Callbacks. (There are different callbacks - on Loading, on Starting and etc.). Read more about this: here.
Now you can run your simulation using sim function:
sim('name_of_model')
name_of_model must contain path if model is not in the active MATLAB folder (active folder you can see in your matlab window just under the main menu).
There are different properties of sim function, read about them in help this can be useful for you. By the way: you can change some parameters of your model using sim. You even can find any block in your model and change it's properties. Read more about sim and about finding current blocks. Interesting that the last solution give you ability to change parameters during the simulation!
About getting output. After you run simulation you get tout variable in main workspace. It is an array of timesteps. But if you add outport block (like at my image) you also get another variable in workspace yout. yout is an Datasets. It contain all your outports values. For 2 outports for example:
yout
yout =
Simulink.SimulationData.Dataset
Package: Simulink.SimulationData
Characteristics:
Name: 'yout'
Total Elements: 2
Elements:
1 : ''
2 : ''
Get the values of any of outports:
yout.get(1).Values
it is a timeseries data type, so:
yout.get(1).Values.Time - give you times
yout.get(2).Values.Data - give you values of this outport at each time
We have one more method to take output values:
[t,x,y] = sim('model_name')
it returns double arrays. t- time array, y - matrix of all outports values (it already double and contain only values without times, but for each simulation time!)
So now you can create common Matlab GUI and work at this variables! There is no any difficulties. You can read more about GUI for Simulink here.
In simulink I have a function block. Basically it contains
function y=fcn(u)
if u==1
a=[0,...,1];
b=[1,...,2];
end
y=[a',b'];
%y=struct('time',a,'value',b); %Second option
I want to use these arrays as a signal. As you see I have tried two options, making an output as an array and as a structure, non of them work for me.
In short, I'd like to be able to connect a scope to the output of the function and see the signal generated by (a,b). The reason I want to do it from a Simulink block is that I can just switch between many options of signals without having to build again the model. More over, I'd prefer that if the simulation time is bigger than whatever is specified in a then the signal keeps the last value of b.
p.s. I have tried this using a From Workspace block and it works fine.
I need to read a matrix variable from the workspace in Simulink. I am using the simin block but I have a problem with this. It shows me the following error:
Invalid workspace variable specified as workspace input in
'untitled1/From Workspace'. Time values must be monotonically
increasing.
Which properties of this block (simin) or the matrix variable in workspace should I change to read it in simulink with the block correctly and operate with it (Multiply, Transpose....)?
what does your input variable look like? I use a structure:
variable1.time=[0 1 2];
variable1.signals.values=rand(1,3);
I've been doing a lot of research over the last few hours and I can't seem to figure out how to get and set a value to an Inport box. I have a simple model that has one inport and one outport and they are connected to each other. I want to set the inport value to 2 and run my simulation and see if my outport got set correctly. I read that you can't use set_param to set that value but you have to use sim(), but I'm not having any luck with that. So if anyone know how to look at the data in the inport box and/or how to set it, I'd appreciate it. Thanks!
Lucas
Ports in and out in Simulink don't work as you think. They are needed when you create subsystem - your own Simulink block, than you'll have your in and out ports.
But when you just want a make some model, and pass some data in it, and get results to Matlab, then you need To workspace and From workspace blocks. Some variable-name is assigned in their options, so you can set input data from your .m file and get results in matlab variables.
Block From workspace takes matrix variable, but if you want to pass just a number, you can use block Const and fill it value with a variable name.
Here is a screenshot, an example of in, out, to workspace and const blocks:
Here in example, I have input parameter x (block const), subsystem Gain5 and output parameter y (block To workspace). Inside the subsystem I use in and out blocks to get and return values.