I have read Alex Ott's fantastic guide to CEDET for Emacs, and I think I know how to set up my EDE projects correctly.
However, when I try to jump to a local symbol (e.g. the main() function in C++) using the command semantic-complete-jump-local (C-c , j), I get the error [no match] even though I am calling this command from within the .cpp file where the symbol is defined.
Also, when I try to jump with semantic-complete-jump-global (C-c , J) to a symbol with multiple definitions on different files (e.g. multiple main() functions), CEDET complains with [not unique] but it does not give me a way to choose which symbol I want to see. The only way to find the symbol I am interested in is to cycle through all the options with <TAB> buffer by buffer until I find the one I am interested in. Is there a way to get a list of symbols from where I can choose ? Ideally, it would be great to get an autocomplete list similar to those that Emacs helm (formerly known as Anything) provides.
This is all with Emacs 24.2.1 on Linux with CEDET 1.1.
Had you tried to use semantic-ia-fast-jump command? It uses not only Semantic, but also other data sources, to calculate where to jump. I just tried it, and it correctly jumped to variable, that was declared in the parent class, 3 levels higher in hierarchy.
So I've been using Exuberant ctags with Emacs to navigate my way around a Linux kernel driver I'm trying to understand. I just spent a day debugging a problem which boiled down to me reading the wrong function definition, because foo() was defined (differently) in two separate files, and using M-. to navigate to the function definition took me to the irrelevant one of the two possible options. Is there a way to reliably navigate to a function definition in Emacs? I've given Vim a try with C-] and that seems to take me to the correct function definition, but I'm not normally a Vim user. So I'm looking for an Emacs specific solution, not a "switch from Emacs to Vim".
So i started working with emacs as a programming editor, well i was wondering how you set the language path for a language? Im using python and its giving a error saying searching for directory: no such file or directory,python.
There is no general mechanism, it depends upon the specific language support mode.
For Python, there is the variable python-python-command. It's default value is just python, but if that doesn't work on your system, you can set it to a path (e.g. with M-x customize-variable).
You can also change the python command without changing the configuration by invoking run-python with a prefix, i.e. C-u M-x run-python.
I have been using Emacs for more than three years now but it still takes me days to write even small functions in Lisp. I've looked through GNU Emacs Lisp Reference Manual but it's huge and structured completely opposite from JavaDoc, not from functions to descriptions but the other way around.
What will make my life much easier is some sort of small JavaDoc like document with most commonly used Emacs internal functions and they quick description.
(point) - returns current position in buffer
(save-excursion (p)) - saves current position in buffer before
executing (p) and restores it afterward.
Does anyone know where I can find something like that?
Have you tried the build-in manual in emacs? Open any lisp buffer (or any buffer in lisp mode), move your point to any function or variable, and hit C-h f (for function) or C-h v (for variable). Emacs will give you a fairly concise description of the function/variable.
For example, the manual content for (save-excursion) is
save-excursion is a special form in `C source code'.
(save-excursion &rest BODY)
Save point, mark, and current buffer; execute BODY; restore those things.
Executes BODY just like `progn'.
The values of point, mark and the current buffer are restored
even in case of abnormal exit (throw or error).
The state of activation of the mark is also restored.
This construct does not save `deactivate-mark', and therefore
functions that change the buffer will still cause deactivation
of the mark at the end of the command. To prevent that, bind
`deactivate-mark' with `let'.
The good thing also is the build-in manual give you "link" to to the source code of the function and to other functions that might be related, which make it nice to browse around.
Of course you can't learn lisp this way, but for looking up documentation of function this is a nice starter. When you find the build-in manual not understandable (which sometimes does happen), then it's time for you to google the function ;)
This site has some emacs lisp summary information that may be useful: http://xahlee.org/emacs/elisp.html.
In particularly, check out these links on that page: Basic Text-editing Functions, Emacs Lisp Idioms and Batch Text Processing
The GNU Introduction to emacs lisp is certainly more approachable than the reference manual.
I would add a couple of things:
M-x apropos - searches functions and variables for whatever string you specify (e.g. directory). Note that this is slightly different than C-h a, which only finds interactive functions
find a similar piece of code and copy it - you can learn an awful lot about how to do things by looking at what's already done. If you have a particular function you want to see examples of, one good way is to visit the main lisp source directory in dired (e.g. d:/product/emacs/lisp or /usr/share/lib/emacs/lisp) and do % g which will grep through all files looking for whatever string you type. Open up that file and see what other people have done with it.
C-h f and C-h v - as someone else mentioned, you can open up source, position point over a function or variable and then get documentation on it.
Check out the Emacs wiki, which has a crap-load of Emacs lisp modules for you to peruse.
I think you are taking the wrong approach. When learning a
programming language and set of libraries (collectively, "Emacs
Lisp"), you need to approach it on both the micro and macro scale.
Before you can start writing software, you need to know what tools you
have available. That is what the Emacs Lisp manual aims to educate
you on. You really need to sit down and read the whole thing. That
way you know what features Emacs provides.
After you do that, you need "micro-level" information. There are
a number of sources that provide this. If you have a general idea of
what you need to do ("working with buffers"), then the Lisp reference
is a good place to figure out what you need to know. If you know that
there's a function that does what you want, but don't quite remember
the name, then M-x apropos (C-u C-h a) will help you search the
documentation. If you know what function you want to use, but don't
remember quite how it works, then M-x describe-function (C-h f)
will sort that out for you.
So anyway, the key is to learn Emacs Lisp, and then let Emacs help you
with the details. A list of functions isn't going to teach you much.
(Oh, one more thing -- you should familiarize yourself with Common
Lisp. Most Emacs libraries use cl, which are the useful CL
functions implemented in Emacs Lisp. loop, destructuring-bind,
defun*, and so on are all there, and they are very helpful.)
Good suggestions from others -- Emacs help system is your friend.
In addition:
http://www.emacswiki.org/emacs/EmacsNewbieWithIcicles
http://www.emacswiki.org/emacs/Icicles_-_Progressive_Completion
http://www.emacswiki.org/emacs/Icicles_-_Nutshell_View#ChippingAway
In order to understand what's on, quite often it's useful having a look at the source code.
http://repo.or.cz/w/elbb.git/blob/HEAD:/code/Go-to-Emacs-Lisp-Definition.el
Have you tryed <f1> f ? It is bound to describe-function. Example with point:
point is a built-in function in C source code.
(point)
Return value of point, as an integer.
Beginning of buffer is position (point-min).
[back]
Like most Lisp systeme, Emacs has an integrated documentation tool!
Any Lisp function or variable can declare an optional doc string.
Almost all standard command or function do declare a usefull doc string.
Emacs (like most Lisp systems) allows you to display the doc string of any function or variable (<f1> f and <f1> v) at any time.
When displayed, the doc string is browsable, meaning that you can click on symbols to see their doc string, or go to the source of the corresponding function or variable.
As soon as you evaluate any defun or defvar, its doc string is available through describe-function or describe-variable: this doc is alive!
M-x find-library RET <library name> is all you really need
If you're willing to fork over money for a dead tree, I'd recommend
(source: oreilly.com)
In XEmacs, and I believe in Emacs as well,
pressing C-h f, then the tab key for tab completion, which at that point is all functions, will give you a list of functions the editor knows about.
You just use cursor keys and scroll to one you want to know about and press enter to see details.
If a list of functions, with further info available, is what you want, that will give it to you.
This list is all currently available functions, so if you have packages of lisp installed, it shows the functions those packages supply as well as native functions. In my copy of XEmacs, today, I have 6,586 functions in the list. Emacs will be similar.
The problem is that not all functions have names that make them context-meaningful (ie not all menu variables/functions have the word menu in them, so you will miss some things if you go by names only.
You can use the INFO pages (on the menu) to view them more topically arranged, and get to the same usage information.
Download source code for Emacs. Go to src/ folder and type:
grep -r DEFUN *
You will get list of all primitive Lisp functions of Emacs.