Closed. This question does not meet Stack Overflow guidelines. It is not currently accepting answers.
This question does not appear to be about a specific programming problem, a software algorithm, or software tools primarily used by programmers. If you believe the question would be on-topic on another Stack Exchange site, you can leave a comment to explain where the question may be able to be answered.
Closed 9 years ago.
Improve this question
I am trying to capture video over EasyCap DC60 stk1160 (yellow cable) but on my raspbian 3.10.25 (raspberry pi) in mplayer video looks like this (green and messed video, artefacts):
http://www.youtube.com/watch?v=27YLQKNKZtw&feature=youtu.be
And after few seconds it ends with thi error: http://www.youtube.com/watch?v=5cgQFc0i6vo&feature=youtu.be
I tried many settings (as well as vlc) but result is the same. What am I doing wrong? :(
wohooo, I found out it is problem with power. Raspberry pi is not strong enough to power usb easycap directly. When I use powered usb hub it works! :)
Related
Closed. This question does not meet Stack Overflow guidelines. It is not currently accepting answers.
This question does not appear to be about a specific programming problem, a software algorithm, or software tools primarily used by programmers. If you believe the question would be on-topic on another Stack Exchange site, you can leave a comment to explain where the question may be able to be answered.
Closed 10 months ago.
Improve this question
On Windows 10 I use a batch to open the webcam and start a recording. But while it is recording, the VLC interface shows black.
How can I see what is being recorded at the same time on the VLC screen?
This is the command line:
vlc -Idummy -vvv dshow:// :dshow-vdev="myWebCam" :dshow-adev :live-caching=300 --sout=#transcode{vcodec=h264,vb=512}:std{access=file,dst="miVideo.mp4"}
I have tried the following, but the interface appears black:
vlc dshow:// :dshow-vdev="myWebCam" :dshow-adev :live-caching=300 --sout=#transcode{vcodec=h264,vb=512}:std{access=file,dst="miVideo.mp4"}
Thanks.
Solved! This is the solution:
vlc dshow:// :dshow-vdev="myWebCam" :dshow-adev :live-caching=300 --sout=#duplicate{dst=display,dst=transcode{vcodec=h264,vb=512}}:std{access=file,dst=C:\myVideo.mp4"}
Closed. This question does not meet Stack Overflow guidelines. It is not currently accepting answers.
This question does not appear to be about a specific programming problem, a software algorithm, or software tools primarily used by programmers. If you believe the question would be on-topic on another Stack Exchange site, you can leave a comment to explain where the question may be able to be answered.
Closed 2 years ago.
Improve this question
I work on a Raspberry project, the purpose of this project is to use a Raspberry to control an industrial machine.
My customer would like to produce several hundred Raspberry.
I have an custom Raspbian image and I would like to know how "flash" my image on this several Raspberry in an industrial way.
For the moment, the customer wants to use an Raspberry Pi3b+.
Do you have any ideas ?
Kinda off-topic question for here. But, we are using one of these SD card duplicators if that helps.
Closed. This question does not meet Stack Overflow guidelines. It is not currently accepting answers.
This question does not appear to be about a specific programming problem, a software algorithm, or software tools primarily used by programmers. If you believe the question would be on-topic on another Stack Exchange site, you can leave a comment to explain where the question may be able to be answered.
Closed 2 years ago.
Improve this question
I searched for a solution to reboot raspberry pi 4 after shutting down but only I can find that you wire a switch to reboot it. Is there a program or a script to remotly start up raspberry pi by pressing some button on the keyboard. Because I am using mine a smart tv replacement and want to know is it possible to reboot remotly without getting out of bed? :D
a good solution, which I tested is to directly connect the raspberry pi to the tv via usb, so when you turn on the television as the command the rasp also turns on :)
Closed. This question does not meet Stack Overflow guidelines. It is not currently accepting answers.
This question does not appear to be about a specific programming problem, a software algorithm, or software tools primarily used by programmers. If you believe the question would be on-topic on another Stack Exchange site, you can leave a comment to explain where the question may be able to be answered.
Closed 4 years ago.
Improve this question
I tried to install RASPBIAN os using noobs in to my pi. But when I start the pi after coping the noobs into my sd card, it shows the folling error.
Error resizing existing FAT partition
How to fix it, Thanks in advance.
This usually happens when raspberry cannot read the SD data, and you can fix it by doing a lot of things, for example:
Change the SD card, format the new one of FAT32 and put all of Raspbian data inside it
Get your current SD card and format it again, try to check if this is ok to read/write
Go to this link and check if your SD card compatibility
Check if your power supply is really 5V, and if its passing to Rasp, sometimes rasp doesn't work well because it hasn't enough power
Closed. This question does not meet Stack Overflow guidelines. It is not currently accepting answers.
This question does not appear to be about a specific programming problem, a software algorithm, or software tools primarily used by programmers. If you believe the question would be on-topic on another Stack Exchange site, you can leave a comment to explain where the question may be able to be answered.
Closed 9 years ago.
Improve this question
There are lots of tools to see your CPU etc temperature, but I'm looking for a tool to monitor your room temperature.
I don't know if my PC have the hardware to do this, but maybe it's build in?
Thanks
Here is a link to a room temperatur scan software. All you need is a probe and a usb device.