When I hit Ctrl+F in Eclipse, it would bring up a search-box asking for the term, etc.
That's annoying because if I'm on a small monitor, the pop-up would cover most of the text.
Does Eclipse have a search-bar at the bottom (or top) of the editor like Netbeans does?
(In Netbeans, when you hit Ctrl+F, a very small search-bar would appear at the bottom/top of the editor).
You can use Increment find for this. Press Ctrl+J.
Then observe in the status bar THAT incremental find is activated. Then you can go on typing your search term the first occurrence of word will be highlighted in editor if found else you will get <search term> is not found error(in red colour) in status bar.
Refer the image below
Note:
You can cycle through forward the next occurrences by pressing Ctrl+K and backward by pressing Ctrl+Shift+K
If the shortcut key for incremental find is NOT working then check the short cut keys for Increment Find and Reverse incremental Find commands in
Windows->Preferences->Keys section
Related
In eclipse, when using the CTRL+F dialog, it is a bit annoying to search for some word in a file and having to select the direction you want to search (forward or backward) or having to put the cursor focus at the top of the file to search forward.
Is it possible to disable this direction option and search for words just like Chrome does? (when searching in Chrome, if you reach the last coincidence and press next again, it will go back to the first one immediately).
In the Find/Replace dialog in the section Options there is the checkbox Wrap search for that.
The Wrap search option of the Find/Replace dialog is also applied to the Find Next (Ctrl+K) command.
Alternatively, you can use Incremental Find (Ctrl+J) which is a Find without a dialog: in the Incremental Find mode the entered search string is displayed in the status bar and by hitting Ctrl+J again you go to the next match. On the last match you have to hit Ctrl+J twice to go to the first match.
When using eclipse, I often use the find/replace tool without touching the mouse. I'll press Ctrl+F, type the text I want to find, press tab, type the replacement text, then press Shift+Tab 3 times, to bring focus to the "replace all" button, then I press Space to perform the action and ESC to close the window.
Today, I tried this and tab will only switch between the "find" text box and the "replace with" text box, meaning I have to go to my mouse to perform the "replace all" action, which takes forever (comparatively). I have had this problem before, and thought I recalled a key binding that changes the focus traversal policy for eclipse, but I cant seem to find it now. Googling has turned up nothing, but I don’t think I am searching for the right terms. I don’t think this is OS related, but I am on a Mac.
Thanks in advance!
I finally found this. It was OS related- Mac has a setting to allow tab navigation through buttons.
System Preferences-> keyboard, at the bottom select "all controls"
After doing a Java or File search in Eclipse, the (purple) highlighting of matches in files persists indefinitely, distracting me from whatever task I try to accomplish after I complete my search.
I know that I can open the Search view (by pressing Alt+Shift+Q,S, or by clicking its icon) and then click the "Remove All Matches" button that looks like an advertisement for Dos Equis, but I get tired of all this view-activating and clicking.
I want to clear search results in Eclipse using just the keyboard. Is there a way to do this?
Press Ctrl+F7. Keep on Pressing F7 when reach search view. Release Ctrl Key.
Close search view(in fact any view) as explained here
Once search view is removed from the current perspective search highlight will be removed automatically. If you want to see it again then open search view.
In Komodo Edit, an input field is available in the toolbar. When I type text in it, it highlights matching search results. Is there something like this in Eclipse, either directly or via a plugin?
As TK Gospodinov has already mentioned, there is an Incremental option in Find/Replace (Ctrl+F) dialog.
There is also a special key binding for Incremental search in Eclipse (and personally I use it more frequently). From Eclipse Tips and Tricks:
Use Edit > Incremental Find Next (Ctrl+J) or Edit > Incremental Find Previous (Ctrl+Shift+J) to enter the incremental find mode, and start typing the string to match. Matches are found incrementally as you type. The search string is shown in the status line. Press Ctrl+J or Ctrl+Shift+J to go to the next or previous match. Press Enter or Esc to exit incremental find mode.
If you'd like to have search functionality in a toolbar, you may be interested in the eclipse-glance plugin, which allows you to use the incremental search function in a toolbar by pressing Ctrl + Alt + F while in any text area.
This feature is already available in eclipse. No need to install any plug-in.
Press Ctrl+F, and the Find pop up appears.
Now check the incremental checkbox, and then your texts will be found as you type. No need to hit return.
OR
Use Ctrl+J and you can activate the live search, just that there wont be any UI visible, but you can see the status in eclipse status bar at the bottom.
Press Ctrl+J, start typing the text you want to search for. Press esc to go back to edit mode
The closest thing to the functionality you are asking about is the 'incremental search' mode, which is triggered by checking the 'Incremental' checkbox in the Options group on the Find/Replace dialog in Eclipse (Ctrl+F from the code editor). This will make it start highlighting matches as you type, and if they are keywords, Eclipse will highlight other occurrences (references) in the code editor. Matches inside strings or Javadoc will not be highlighted, however, unless it happens to be the first match after your cursor's position inside the editor.
One similar thing (not the same) is just enabling "mark occurences", then selecting function name, variable etc.
Suppose I make a method signature change that breaks several callers, and I want to review the call sites manually to update them.
Once I change the signature, my "Problems" view shows, say, a dozen errors.
What keys can I hit to navigate through them while leaving the keyboard focus in the editor for fast fixups?
(It's been a while, but I think the Visual Studio equivalent is F8.)
Note that this question does not duplicate Eclipse: How to go to a error using only the keyboard (keyboard-shortcut)?, as that one seeks to navigate only between markers in the current file. In this case, I want to go to the next error regardless of which file it's in.
("Marker" is the general Eclipse term for errors, warnings, etc.)
The best I've come up with so far is Ctrl + F7 to flip to the Problems view, then ↓ to pick the topmost error, then Enter to go to it (which returns focus to the editor).
Here's a way to move to the next error, regardless of editor, in one keystroke. It's not perfect, but it works until it's fixed in Eclipse.
Open a "Markers" view. Click the down arrow at the top right, and choose "Configure Contents". Uncheck the show all box, and create the view to show only the problems you want to see. You'll probably want to deselect "warnings" and "errors" as well. Save it.
Click the same "Markers" down arrow, and choose "Group By". Select "None". This is important because you don't want the parent tree level nodes to show, otherwise some of your "next" actions will take you to those, which don't represent an error.
In Eclipse -> preferences -> keys, search for "Markers". If there is not a keystroke bound to the Markers view, create one. I use Ctrl + Shift + M
Get a keyboard hotkey tool like AutoHotKey (for PC's) or iKey for the Mac. I'm using iKey, but there are plenty of other Mac tools you can use. In your hotkey tool, define an action for the keystroke you want to use for "next error". I chose the standard CMD + .
For that keystroke/action in your hotkey tool, generate 3 keystrokes in the following order:
Ctrl + Shift + M
Down arrow
Enter
Of course, you'll want to change the first one to whatever you picked for yours. You'll probably want to restrict that action to be executed only when Eclipse is the current application.
Save that, create some compile errors, and test it.
Try Ctrl + 3 for Quick access popup window.
If the "Markers view" is not already visible, then type in "markers", in the searchbox on the popup window. Once you have selected it, it should stay available, when you press Ctrl + 3 the next time around.
I just had the same problem, after refactoring some parts of code. I had a lot of errors in different files and i had to go through all of those.
I used the following solution:
Mark all (relevant) entries in the Problems view.
To do this switch to the Problems view using Ctrl+F7 and select the entries with Shift+↓/↑
You can also select all entries using Ctrl+A
Open the marked errors by pressing ↵.
Every file containing at least one marked error will be opened.
The cursor will automatically select one error/file, as if you open only this specific entry
Fix the errors in the opened file.
Here you can use Ctrl+. to navigate to next error inside this file
Close the file using Ctrl+W when your done.
Eclipse will automatically focus the next file and you can go back to step 3
In my case this solution was much faster then switching to the Problems view each time.
There's an Eclipse bug entered for this that has an attachment that looks like it does what you want.
You could use AutoHotkey:
save the mouse position, send a mouse event to click on the arrow in CDT console and then return the mouse back to it's original location. Record the mouse coords with window spy or use autohotkey's search by image function (first capture the images of two arrows with printscreen into bitmaps).