I should create ssrs report and I have following scenario:
I have sql query with median, q25, q75 functions.
The query is grouped by geography. Date, which is not grouped, should be filtered in ssrs in order to calculate aggregations for certain time period and they must be grouped only by geography dimension. Bouth variables startdate and enddate are declared and implemented in to where clause and assigned to date column.
what I need in ssrs is expression for parameters startdate and enddate in the dataset filter. Since I do not select Date in the query, i do not have any generated expression in the ssrs filter.
Can I link report parameters to the query variables or does somebody know any other workaround for this?
I would really appreciate any help!
Your query should look something like this:
SELECT Geography, SUM(Amount) AS Amount
FROM MyTable
WHERE DateField >= #StartDate AND DateField <= #EndDate
GROUP BY Geography
On your dataset's property page, click the Parameters tab and make sure that the date parameters are mapped to the variables you use in your query.
Related
I created a function that retrieves data from multiple table and insert the result into a new table. I am passing few dates in the where clause to filter the applicable information. The dates are in timestamptz format. The query takes roughly a min to process. However when I make the change in the where clause to pass the date from another table, the query lags a lot. i.e.
My initial argument that doesn't lag is
where timestamp = '2022-01-05 04:00:00+00'
The lag is when I change this where clause to pass this date from another table.
where timestamp = select date_time from table_Test
The date_time in table_test is defined as timestamptz and the value is '2022-01-05 04:00:00+00'.
Any idea why the query lags when I pass the date argument from another table?
Thanks,
So I am trying and struggling for few days to extend the schema with the custom groupby using something like this
I have a table with few fields like id, country, ip, created_at.
Then I am trying to get them as groups. For example, group the data based on date, hourly of date, or based on country, and based on country with DISTINCT ip.
I am zero with SQLs honestly. But I tried to play around and get what I want. Here's an example.
SELECT Hour(created_at) AS date,
COUNT(*) AS count
FROM session where CAST(created_at AS date) = '2021-04-05'
GROUP BY Hour(created_at)
ORDER BY date;
SELECT country,
count(*) AS count from (SELECT * FROM session where CAST(created_at AS date) <= '2021-05-12' GROUP BY created_at) AS T1
GROUP BY country;
SELECT country, COUNT(*) as count
FROM (SELECT DISTINCT ip, country FROM session) AS T1
GROUP BY country;
SELECT DATE(created_at) AS date,
COUNT(*) AS count
FROM session
GROUP BY DATE(created_at)
ORDER BY date;
Now I am struggling with two things.
How do I make the date as variables? I mean, if I want to group them for a particular date range/ or today's data hourly, or per quarter gap (more of configurable), how do I add the variables in Hasura's Raw SQL?
Also for this approach I have to add schema for each one of them? Like this
CREATE
OR REPLACE VIEW "public"."unique_session_counts_date" AS
SELECT
date(session.created_at) AS date,
count(*) AS count
FROM
session
GROUP BY
(date(session.created_at))
ORDER BY
(date(session.created_at));
Is there a way to make it more generalized? What I mean is, if it
was in Nodejs I could have done something like
return rawQuery(
`
select ${field} x, count(*) y
from ${table}
where website_id=$1
and created_at between $2 and $3
${domainFilter}
${urlFilter}
group by 1
order by 2 desc
`,
params,
);
In this case, based on whatever field and where clause I send, one query would do the trick for me. Can do something similar in hasura?
Thank you so much in advance.
How do I make the date as variables? I mean, if I want to group them for a particular date range/ or today's data hourly, or per quarter gap (more of configurable), how do I add the variables in Hasura's Raw SQL?
My first thought is this. If you're thinking about passing in variables via a GraphQL for example, the GraphQL would look something like:
query MyQuery {
unique_session_counts_date(where: {created_at: {_gte: "<start date here>", _lte: "<end date here>"}}) {
<...any fields, rollups, etc here...>
}
}
The underlying view/query would follow the group by and order by that you've detailed. Then you'd be able to submit a query of the graphql query and just pass in the pertinent parameters like the $1, $2, and $3 in the raqQuery call.
Also for this approach I have to add schema for each one of them?
The schema? The view? I don't think a view specifically would be required, if a multilevel select or similar query can handle it and perform then a view wouldn't particularly be needed.
That's my first stab at the problem. I'm going to try to work through this problem in a few hours via a Twitch stream # HasuraHQ if you can join, happy to walk through it live.
I have a calendar table called CalendarInformation that gives me a list of dates from 2015 to 2025. This table has a column called BusinessDay that shows what dates are weekends or holidays. I have another table called OpenProblemtimeDiffTable with a column called number for my problem number and a date for when the problem was opened called ProblemNew and another date for the current column called Now. What I want to do is for each problem number grab its date ranges and find the dates between and then sum them up to give me the number of business days. Then I want to insert these values in another table with the problem number associated with the business day.
Thanks in advance and I hope I was clear.
TRUNCATE TABLE ProblemsMoreThan7BusinessDays
DECLARE #date AS date
DECLARE #businessday AS INT
DECLARE #Startdate as DATE, #EndDate as DATE
DECLARE CONTACT_CURSOR CURSOR FOR
SELECT date, businessday
FROM CalendarInformation
OPEN contact_cursor
FETCH NEXT FROM Contact_cursor INTO #date, #businessday
WHILE (##FETCH_STATUS=0)
BEGIN
SELECT #enddate= now FROM OpenProblemtimeDiffTable
SELECT #Startdate= problemnew FROM OpenProblemtimeDiffTable
SET #Date=#Startdate
PRINT #enddate
PRINT #startdate
SELECT #businessday= SUM (businessday) FROM CalendarInformation WHERE date > #startdate AND date <= #Enddate
INSERT INTO ProblemsMoreThan7BusinessDays (businessdays, number)
SELECT #businessday, number
FROM OpenProblemtimeDiffTable
FETCH NEXT FROM CONTACT_CURSOR INTO #date, #businessday
END
CLOSE CONTACT_CURSOR
DEALLOCATE CONTACT_CURSOR
I tried this code using a cursor and I'm close, but I cannot get the date ranges to change for each row.
So if I have a problemnumber with date ranges between 02-07-2018 and 05-20-2019, I would want in my new table the sum of business days from the calendar along with the problem number. So my output would be column number PROB0421 businessdays (with the correct sum). Then the next problem PRB0422 with date ranges of 11-6-18 to 5-20-19. So my output would be PROB0422 with the correct sum of business days.
Rather than doing this in with a cursor, you should approach this in a set based manner. That you already have a calendar table makes this a lot easier. The basic approach is to select from your data table and join into your calendar table to return all the rows in the calendar table that sit within your date range. From here you can then aggregate as you require.
This would look something like the below, though apply it to your situation and adjust as required:
select p.ProblemNow
,p.Now
,sum(c.BusinessDay) as BusinessDays
from dbo.Problems as p
join dbo.calendar as c
on c.CalendarDate between p.ProblemNow and p.Now
and c.BusinessDay = 1
group by p.ProblemNow
,p.Now
I think you can do this without a cursor. Should only require a single insert..select statement.
I assume your "businessday" column is just a bit or flag-type field that is 1 if the date is a business day and 0 if not? If so, this should work (or something close to it if I'm not understanding your environment properly).:
insert ProblemsMoreThan7BusinessDays
(
businessdays
, number
)
select
number
, sum( businessday ) -- or count(*)
from OpenProblemtimeDiffTable op
inner join CalendarInformation ci on op.problem_new >= ci.[date]
and op.[now] <= ci.[date]
and ci.businessday = 1
group by
problem_number
I usually try to avoid the use of cursors and working with data in a procedural manner, especially if I can handle the task as above. Dont think of the data as 1000's of individual rows, but think of the data as only two sets of data. How do they relate?
I have a report in ssrs 2008 r2.I have created two multi-valued parameter on my report like fiscal period (value is 08,09,10,11) and parentname(in which there are multiple parent like a,b,c,d...).A user can select single value or multiple value of his choice.I have create seprate dataset for each to populate its value.Both have datatype 'Text'.
Now uderlying query is something like this:
selet * from table where fiscal period in(#fiscalperiod) and parentname in(#parentname)
If I run this query manually in sql then I wrote query like
select * from table where fiscalperiod in('09','10') and parentname in('a','b''c')
Now my question is Is ssrs run the dataset query of report in this way like 'a','b''c' that means comma seprated value.
Since Parameter is multi-valued, Query will be run like 'a','b','c'
selet * from table where fiscal period in(#fiscalperiod) and parentname in(#parentname)
If you select fiscal period: 08, 09 and parentname: a, b then query will be executed internally like
selet * from table where fiscal period in('08', '09') and parentname in('a', 'b')
Sorry if the title is confusing. Here is the query I have
Select MONTH(DATE(TIMESTAMP)), SUM(FIELD1), SUM(FIELD2) from TABLE WHERE TIMESTAMP BETWEEN '2009-07-26 00:00:00' AND '2010-02-24 23:59:59' GROUP BY MONTH(DATE(TIMESTAMP))
This will let me get the month number out of the query. The problem is that right now it is sorting the months 1,2,3,4.... when it spans two separate years. I need to be able to sort this query by year then month.
If I add "ORDER BY TIMESTAMP" at the end of my query I get this error:
Column TIMESTAMP or expression in SELECT list not valid. SQLCODE=-122
Also I changed the field names for this question to keep it clear the field isn't actually called TIMESTAMP
You need to group by year then month.:
SELECT YEAR(YourField),
Month(YourField),
SUM(Field1),
SUM(Field2)
FROM Table
WHERE...
GROUP BY
YEAR(YourField),
Month(YourField)
ORDER BY
YEAR(YourField),
Month(YourField)