How do I create a new empty buffer with a single keystroke? I can create a new buffer with C-x b and then entering a name. (I use ido-mode, so if I just hit RET it opens the most recent buffer.)
I'd like a command to open a new untitled buffer with a single key binding, e.g. s-t.
(Similar to the new-tab command in Aquamacs.)
As YoungFrog pointed out, it can be easier to just generate a new buffer (which will get automatically get a number appended to it when it exists):
(defun new-buffer ()
(interactive)
(switch-to-buffer (generate-new-buffer "buffer"))
)
(global-set-key (kbd "\s-t") 'new-buffer)
Related
I have many buffers open in an Emacs window. I want to move one of the buffers to a new window. Is there a command which does that?
The command you are looking for is tear-off-window. Note that this command must be associated with a mouse click event.
For example, you can put the following code (from this reddit comment) in your init file (more about init file here):
(global-set-key [mode-line C-mouse-1] 'tear-off-window)
This will call tear-off-window when you Control-click on the buffer modeline.
If you want to use a keyboard binding, the modified version of tear-off-window is below. Put it into your init file to save it after restarting emacs.
(bind-key "C-x C-X" #'my/tear-off-window)
(defun my/tear-off-window ()
"Delete the selected window, and create a new frame displaying its buffer."
(interactive)
(let* ((window (selected-window))
(buf (window-buffer window))
(frame (make-frame)))
(select-frame frame)
(switch-to-buffer buf)
(delete-window window)))
In the code, the modified command is bind to "C-x C-X". You are free to change it to any other key sequence (more details here).
IIUC, you want to create a new WM window.
Emacs uses a slightly different terminology: what are usually called "windows" in a GUI environment, Emacs calls "frames". WIthin a single frame, Emacs subdivides its area into separate "windows" (IOW, even in a non-GUI environment, Emacs acts as a "tiling" window manager). So, you can create a new frame with C-x 5 2 (or equivalently M-x make-frame-command RET) and then in that frame, switch to the required buffer with C-x b <buffer-name> RET.
Note by the way, that you don't "move" the buffer to the new frame: the buffer exists independently of whether there is a (emacs) window in a frame that displays the buffer.
This is a very simple request: I want to create a new, blank file without giving it a name (yet). I can use the scratch buffer but there's only one. I can C-x C-f and open a new file, but then I have to give it a name and path. If I'm just writing notes to myself or sketching out ideas, I don't want to have to give it a name. How do I create a new, empty, unnamed file?
You can create a new buffer with: C-xb and type in the buffer name and it will create a new buffer with a name that you choose.
If you want to save that buffer, just hit C-x w to create the file with its contents to a desired location.
My recommendation is that you give org-mode a try. It will do what want among a million other things.
Give it a name. Just don't save it.
Not what you wanted to hear, but this is the Emacs way.
Use C-x C-f, giving the (to-be-file-visiting) buffer a name. Edit the text. Do not use C-x C-s to save the buffer to the file (i.e., to disk).
Note that you can first put yourself in a directory whose contents you don't care about, so that if you accidentally do save the buffer there then you can easily find, recognize and toss the file. To change directories, you can use M-x cd. Or just do it by editing the directory part when you first use C-x C-f. Or use C-x d to put yourself in a Dired buffer for the directory.
If you don't want to take the chance of accidentally hitting C-x C-s and thus saving your edits, then use C-x b instead of C-x C-f. You are (even here) prompted for the buffer name. Giving it a new name (not the name of an existing buffer) creates a new buffer. In this case, if you use C-x C-s then Emacs prompts you for the file location to save the buffer in.
Why would you want to use C-x C-f instead of C-x b, if you might not want to save the buffer? Providing a file extension in the file name you give automatically puts the buffer in the proper major mode (typically). Otherwise (for C-x b) you need to put the buffer in the mode you want.
Buffer *scratch* is by default in Lisp-Interaction mode, which is similar to Emacs-Lisp mode (but not the same).
In every other text editor or word processor the intuition is to create a “new file” or a “new buffer”, not to switch to idiosyncratic *scratch* buffer. For example, you write quick notes or thoughts in several different buffers to keep trace of them—later you decide if you throw them away or save them. Or you manipulate a snippet of text or code, but you don't want to change the original buffer, so you just copypaste it to a new temporary buffer.
*scratch* is set to Lisp Interaction mode, but if I want to quickly evaluate some Elisp code, I could eval it running eval-expression (Alt+:) or in Elisp interpreter IELM (Alt+x Enter ielm). Also, if you close *scratch* buffer, it doesn't ask you to save it, so you can accidentally lose all your work. Drew's traditional solution seems too sub-optimal. And I don't buy the argument that “this is how you do it in Emacs”. Emacs is a customizable editor, so you can and should create whatever workflow is comfortable for you.
That's how ErgoEmacs solves it, buy creating a new-empty-buffer command. You can implemented like this:
(defun new-empty-buffer ()
"Opens a new empty buffer."
(interactive)
(switch-to-buffer (generate-new-buffer "untitled"))
(funcall initial-major-mode)
(put 'buffer-offer-save 'permanent-local t)
(setq buffer-offer-save t))
The variable buffer-offer-save resets every time you change a major mode, therefore you need to annotate it with permanent-local. It also prompts only when you exit Emacs. I think it is intuitive for it to also ask, when you close a modified untitled buffer, therefore see my solution on how to upgrade kill-buffer to prompt before closing a modified buffer.
ErgoEmacs revamps the default keybindings completely and has new-empty-buffer bound to Ctrl+N, like in almost all software. Change variable initial-major-mode if you want the new buffer to have another mode on start.
See also:
Emacs: Problems of the Scratch Buffer # Xah Lee
Emacs: New Empty Buffer # Xah Lee
You can try the following snippet, just add it to your .emacs
(defun new-file-tmp()
"Create a new empty file."
(interactive)
(let ((buf (generate-new-buffer "untitled")))
(switch-to-buffer buf)
(put 'buffer-offer-save 'permanent-local t)
(setq buffer-offer-save t)))
(defun tool-bar-local-item-pre (icon def key map after_item &rest props)
"Add an item to the tool bar in map MAP.
ICON names the image, DEF is the key definition and KEY is a symbol
for the fake function key in the menu keymap. Remaining arguments
PROPS are additional items to add to the menu item specification. See
Info node ‘(elisp)Tool Bar’. The item is added after AFTER_ITEM.
ICON is the base name of a file containing the image to use. The
function will first try to use low-color/ICON.xpm if ‘display-color-cells’
is less or equal to 256, then ICON.xpm, then ICON.pbm, and finally
ICON.xbm, using ‘find-image’."
(let* ((image-exp (tool-bar--image-expression icon)))
(define-key-after map (vector key)
`(menu-item ,(symbol-name key) ,def :image ,image-exp ,#props) after_item)
(force-mode-line-update)))
(when (boundp 'tool-bar-map)
(tool-bar-local-item-pre "new" 'new-file-tmp 'new-file-tmp tool-bar-map
'new-file :label "" :help "New untitled File")
(define-key tool-bar-map (vector 'new-file) nil)
;; comment the above line if you want to keep the button for the default behavior
)
(global-set-key (kbd "C-n") 'new-file-tmp)
It defines a new command which creates new empty buffers
Then the code binds it to the top left button of the toolbar, if you are in gui mode, and to the Control-n shortcut.
You can check the post on my site about it.
disclaimer: it's my site
A buffer and a file are not the same thing.
terminology
Regarding buffers,
The text you are editing in Emacs resides in an object called a
buffer. Each time you visit a file, a buffer is used to hold the file's text.
Regarding files,
The operating system stores data permanently in named files, so most
of the text you edit with Emacs comes from a file and is ultimately
stored in a file.
Buffers and files are related through visiting,
Visiting a file means reading its contents into an Emacs buffer so you
can edit them. Emacs makes a new buffer for each file that you visit.
answering the question
Unless I'm mistaken, technically speaking, your question, as written, can't be answered. Pedantically speaking, there's no such thing as (or little practical use for) an unnamed file. A file is a handle for something stored on disk. If you have no handle, then why make a file?
The question can then be interpreted as having two possible meanings1.
1. Making a new buffer (without regard to name)
A new buffer must have a name. An unsaved buffer can be saved to file with a given name using write-file (C-x C-w). You will be prompted for a path/name. Once written, the buffer update to be visiting the file you just wrote.
Since the name of the buffer doesn't matter (until you write it to file), here's a function which creates buffers named *scratch1*, *scratch2*, ... .
(defun create-scratch-buffer ()
"Create a new numbered scratch buffer.
Taken from URL `https://stackoverflow.com/a/21058075/5065796' "
(interactive)
(let ((n 0)
bufname)
(while (progn
(setq bufname (concat "*scratch"
(if (= n 0) "" (int-to-string n))
"*"))
(setq n (1+ n))
(get-buffer bufname)))
(switch-to-buffer (get-buffer-create bufname))
(org-mode)
(if (= n 1) initial-major-mode)))
2. Making a new file (without regard to name)
As hinted at in the new buffer solution, new files can be created with write-file.
When called interactively (M-x make-random-file), this function prompts for a directory. It then writes an empty file named something random like tmp-17388716387615.txt.
(defun make-random-file (dir)
"Make a random file in DIR."
(interactive "DDir: ")
(let* ((filename (concat "tmp-" (int-to-string (random t)) ".txt"))
(filepath (concat dir filename)))
(write-region "" nil filepath nil 'silent nil 'excl)))
As always, if the code above doesn't make sense, look at the documentation for functions and variables with C-h f and C-h v, respectively. And/or read the Introduction to Programming in Emacs Lisp.
1 It was the second meaning which I was searching for solutions to when I found this as the top search engine hit. Apologies if this was a bit obtuse. Figured it was better to share my solutions with y'all than not. :)
My Emacs is on OS X system. Is there any way to make a new frame defaulted to an empty buffer whenever I use ⌘N (just like the way TextEdit works)? I prefer to write contents first and decide an appropriate filename later. However, Emacs wants me to decide the filename first and write contents later. I don't see any advantage for it. Does anyone know why Emacs works that way?
Basically, if I use C-x 5 2, Emacs always pops up a frame with whatever file I am currently working on. This is inconvenient. I also don't want my Emacs to pop up a new frame defaulted to *scratch* (many Google search results somehow suggest this approach). I prefer it to have a buffer temporarily called "Untitled" in the new frame, and if I use ⌘N again, Emacs pops up another temporarily "Untitled 2" buffer, and so on. In this way, I can decide the buffer filenames later.
You can create new buffers with switch-to-buffer. Type C-x b, enter a buffer name, and press RET. If no buffer with that name exists, Emacs creates a new one automatically in Fundamental Mode. You may switch to any other mode as usual with M-x, e.g. M-x python-mode. To change the default buffer, set the default value of major-mode to the desired buffer.
If you'd like to have a buffer name chosen automatically, and create a new frame, however, you need to write your own command:
(defun lunaryorn-new-buffer-frame ()
"Create a new frame with a new empty buffer."
(interactive)
(let ((buffer (generate-new-buffer "untitled")))
(set-buffer-major-mode buffer)
(display-buffer buffer '(display-buffer-pop-up-frame . nil))))
Bind this to C-c n:
(global-set-key (kbd "C-c n") #'lunaryorn-new-buffer-frame)
Now pressing C-c n creates a new frame with a new empty buffer named “untitled” where x is a consecutive number.
The following will create a buffer with a unique name. The buffer is not associated with any file, so if/when you ever C-x C-s save-buffer, you will be prompted to supply a filename.
(defun empty-frame ()
"Open a new frame with a buffer named Untitled<N>.
The buffer is not associated with a file."
(interactive)
(switch-to-buffer-other-frame (generate-new-buffer "Untitled")))
This might work for you, if I understand your request:
(defun empty-frame ()
(interactive)
(let ((fl (make-temp-file "Untitled")))
(switch-to-buffer-other-frame fl)))
This will open a new temporary file for each new buffer. If you'd rather not actually create the file, you can use this instead:
(defun empty-frame ()
(interactive)
(let ((bn "Untitled-")
(num 1))
(while
(get-buffer (concat bn (number-to-string num)))
(setq num (1+ num)))
(switch-to-buffer-other-frame
(concat bn (number-to-string num)))))
You've seen answers as to how to create new "Untitled" buffers, but as for why Emacs wants you to first choose a name, some of the reasons are:
Historical: that's just how it worked, and once you get used to it, it's no worse than the alternative.
Major modes and various other details are usually chosen based on the name of the file. So instead of creating an Untitled buffer and having to choose whether to put it into LaTeX mode or C mode, you just open a file with extension ".tex" or ".c".
Having a file name means that Emacs can use the standard auto-save procedure, whereas with the Untitled approach, applications need to have some special way to auto-save those Untitled documents at some "standard" place.
C-x b *untitled* will open new buffer if not exist. Also, see Emacs manual
How can I open a new window (for example using C-x 3) into a new buffer, rather than a mirrored buffer that just echoes what I type.
So for example, let's say I'm messing around with python and I want to run the script in the shell. As it is currently I do this: C-x 3, M-x shell and then start it up and running. I'd rather just C-x 3 and it automatically opens into shell. I'm really new to Emacs so I don't know where to look for this.
It sounds to me like this, or something similar, is what you are looking for:
(defun pop-to-buff-at-right (buffer)
"Pop to BUFFER at the right of the current window."
(interactive "B")
(pop-to-buffer buffer '(display-buffer-in-side-window
(side . right)
(inhibit-same-window . t))))
You do not want to just split the window, which is specifically about showing the same buffer twice. You want to switch to another buffer, but you want it to be displayed to the right of the current window.
In emacs it is easy to define custom commands and bind it to keys. For instance, if you add this to your init file:
(defun open-shell-at-left ()
(interactive) ;; Tell emacs this function can be called interactively
(split-window-right) ;; Just what C-x 3 does
(shell)) ;; Just what M-x shell does
(global-set-key (kbd "C-c 3") 'open-shell-at-left)
You will have what you want when you type C-c 3. In general, you can find documentation about what a key binding does by typing C-h k and the keybinding. From that point, it is easy to chain existing commands into new ones.
I don't know why but currently emacs opens only one copy of w3m. If w3m is already open then retyping the command to open w3m takes me to the already opened buffer. I would like to configure ansi-term similarly i.e. typing C-x C-a (command open ansi-term) should take me to already opened ansi-term instead of opening a new buffer altogether.
How can I achieve this in emacs?
You could write a wrapper function around ansi-term that checks to see if there already is an existing terminal buffer, and recycles that buffer if it exists:
(defun green-ansi-term ()
"Show an existing buffer called \"*ansi-term*\" if one exists, otherwise
call function ansi-term interactively."
(interactive)
(let ((existing-buffer (get-buffer "*ansi-term*")))
(if existing-buffer
(switch-to-buffer existing-buffer)
(call-interactively 'ansi-term))))