Assuming I have a binary
Message = <<"string containing emoji">>.
How do I properly encode it in Unicode? I tried doing:
Encoded = <<Message/utf16>>.
I get this warning when compiling the file:
Warning: binary construction will fail with a 'badarg' exception
(invalid Unicode code point in a utf8/utf16/utf32 segment)
I tried this with /utf8 as well. Same warning.
Assuming that the binary you start with is encoded according to UTF-8, and you need to encode it as little-endian UTF-16, this should work:
unicode:characters_to_binary(<<"string containing emoji">>, utf8, {utf16, little})
See the documentation for the Unicode module for more information.
The reason why <<Message/utf16>> fails is that the utf8, utf16 and utf32 specifiers in bit syntax encode a single codepoint, not an entire string. So to encode the character U+1F64C, you could use:
2> <<16#1f64c/utf8>>.
<<240,159,153,140>>
3> <<16#1f64c/utf16>>.
<<"\330=\336L">>
4> <<16#1f64c/utf32>>.
<<0,1,246,76>>
You may need to add -*- coding: utf8 -*- as the first line of your module, and use /utf8.
My guess is that you are using Erlang/OTP < 17, meaning files are considered latin-1 unless specified otherwise.
Related
I'm currently working on something that requires me to pass a Base64 string to a PowerShell script. But while decoding the string back to the original I'm getting some unexpected results as I need to use UTF-7 during decoding and I don't understand why. Would someone know why?
The Mozilla documentation would suggest that it's insufficient to use Base64 if you have Unicode characters in your string. Thus you need to use a workaround that consists of using encodeURIComponent and a replace. I don't really get why the replace is needed and shortened it to btoa(escape('✓ à la mode')) to encode the string. The result of that operation would be JXUyNzEzJTIwJUUwJTIwbGElMjBtb2Rl.
Using PowerShell to decode the string back to the original, I need to first undo the Base64 encoding. In order to do System.Convert can be used (which results in a byte array) and its output can be converted to a UTF-8 string using System.Text.Encoding. Together this would look like the following:
$bytes = [System.Convert]::FromBase64String($inputstring)
$utf8string = [System.Text.Encoding]::UTF8.GetString($bytes)
What's left to do is URL decode the whole thing. As it is a UTF-8 string I'd expect only to need to run the URL decode without any further parameters. But if you do that you end up with a accented a that looks like � in a file or ? on the console. To get the actual original string it's necessary to tell the URL decode to use UTF-7 as the character set. It's nice that this works but I don't really get why it's necessary since the string should be UTF-8 and UTF-8 certainly supports an accented a. See the last two lines of the entire script for what I mean. With those two lines you will end up with one line that has the garbled text and one which has the original text in the same file encoded as UTF-8
Entire PowerShell script:
Add-Type -AssemblyName System.Web
$inputstring = "JXUyNzEzJTIwJUUwJTIwbGElMjBtb2Rl"
$bytes = [System.Convert]::FromBase64String($inputstring)
$utf8string = [System.Text.Encoding]::UTF8.GetString($bytes)
[System.Web.HttpUtility]::UrlDecode($utf8string) | Out-File -Encoding utf8 C:\temp\output.txt
[System.Web.HttpUtility]::UrlDecode($utf8string, [System.Text.UnicodeEncoding]::UTF7) | Out-File -Append -Encoding utf8 C:\temp\output.txt
Clarification:
The problem isn't the conversion of the Base64 to UTF-8. The problem is some inconsistent behavior of the UrlDecode of C#. If you run escape('✓ à la mode') in your browser you will end up with the following string %u2713%20%E0%20la%20mode. So we have a Unicode representation of the check mark and a HTML entity for the á. If we use this directly in UrlDecode we end up with the same error. My current assumption would be that it's an issue with the encoding of the PowerShell window and pasting characters into it.
Turns out it actually isn't all that strange. It's just for what I want to do it's advantages to use a newer function. I'm still not sure why it works if you use the UTF-7 encoding. But anyways, as an explanation:
... The hexadecimal form for characters, whose code unit value is 0xFF or less, is a two-digit escape sequence: %xx. For characters with a greater code unit, the four-digit format %uxxxx is used.
https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Global_Objects/escape
As TesselatingHecksler pointed out What is the proper way to URL encode Unicode characters? would indicate that the %u format wasn't formerly standardized. A newer version to escape characters exists though, which is encodeURIComponent.
The encodeURIComponent() function encodes a Uniform Resource Identifier (URI) component by replacing each instance of certain characters by one, two, three, or four escape sequences representing the UTF-8 encoding of the character (will only be four escape sequences for characters composed of two "surrogate" characters).
The output of this function actually works with the C# implementation of UrlDecode without supplying an additional encoding of UTF-7.
The original linked Mozilla article about a Base64 encode for an UTF-8 strings modifies the whole process in a way to allows you to just call the Base64 decode function in order to get the whole string. This is realized by converting the URL encode version of the string to bytes.
Is it possible to imbue a std::fstream so that a std::string containing UTF-8 encoding can be streamed to an UTF-16 file?
I tried the following using the utf8-to-utf16 facet, but the result file is still UTF-8:
std::fstream utf16_stream("test.txt", std::ios_base::trunc | std::ios_base::out);
utf16_stream.imbue(std::locale(std::locale(), new codecvt_utf8_utf16<wchar_t,
std::codecvt_mode(std::generate_header | std::little_endian)>);
std::string utf8_string = "\x54\\xE2\x83\xac\x73\x74";
utf16_stream << utf8_string;
References for the codecvt_utf8_utf16 facet seem to indicate it can be used to read and write UTF-8 files, not UTF-16 - is that correct, and if so, is there a simple way to do what I want to do?
file streams (by virtue of the requirements of std::basic_filebuf §22.4.1.4.2[locale.codecvt.virtuals]/3) do not support N:M character encoding conversions as would be the case with UTF8 internal / UTF16 external.
You'd have to build a UTF-16 string, e.g. by using wstring_convert, reinterpret it as a sequence of bytes, and output it using usual (non-converting) std::ofstream.
Or, alternatively, convert UTF-8 to wide first, and then use std::codecvt_utf16 which produces UTF-16 as a sequence of bytes, and therefore, can be used with file streams.
Documentation all directs me to unicode support, yet I don't think my request has anything to do with Unicode. I want to work with raw bytes within the context of a single scalar; I need to be able to figure out its length (in bytes), take substrings of it (in bytes), write the bytes to disc, and over the network. Is there an easy way to do this, without treating the bytes as any sort of encoding in perl?
EDIT
More explicitly,
my $data = "Perl String, unsure of encoding and don't need to know";
my #data_chunked_into_1024_bytes_each = #???
Perl strings are, conceptually, strings of characters, which are positive 32-bit integers that (normally) represent Unicode code points. A byte string, in Perl, is just a string in which all the characters have values less than 256.
(That's the conceptual view. The internal representation is somewhat more complicated, as the perl interpreter tries to store byte strings — in the above sense — as actual byte strings, while using a generalized UTF-8 encoding for strings that contain character values of 256 or higher. But this is all supposed to be transparent to the user, and in fact mostly is, except for some ugly historical corner cases like the bitwise not (~) operator.)
As for how to turn a general string into a byte string, that really depends on what the string you have contains and what the byte string is supposed to contain:
If your string already is a string of bytes — e.g. if you read it from a file in binary mode — then you don't need to do anything. The string shouldn't contain any characters above 255 to being with, and if it does, that's an error and will probably be reported as such by the encryption code.
Similarly, if your string is supposed to encode text in the ASCII or ISO-8859-1 encodings (which encode the 7- and 8-bit subsets of Unicode respectively), then you don't need to do anything: any characters up to 255 are already correctly encoded, and any higher values are invalid for those encodings.
If your input string contains (Unicode) text that you want to encode in some other encoding, then you'll need to convert the string to that encoding. The usual way to do that is by using the Encode module, like this:
use Encode;
my $byte_string = encode( "name of encoding", $text_string );
Obviously, you can convert the byte string back to the corresponding character string with:
use Encode;
my $text_string = decode( "name of encoding", $byte_string );
For the special case of the UTF-8 encoding, it's also possible to use the built-in utf8::encode() function instead of Encode::encode():
utf8::encode( $string );
which does essentially the same thing as:
use Encode;
$string = encode( "utf8", $string );
Note that, unlike Encode::encode(), the utf8::encode() function modifies the input string directly. Also note that the "utf8" above refers to Perl's extended UTF-8 encoding, which allows values outside the official Unicode range; for strictly standards-compliant UTF-8 encoding, use "utf-8" with a hyphen (see Encode documentation for the gory details). And, yes, there's also a utf8::decode() function that does pretty much what you'd expect.
If I understood your question correctly, what you want is the pack/unpack functions: http://perldoc.perl.org/functions/pack.html
As long as your string doesn't contain characters above codepoint 255, it will mostly work as plain byte string, with length and substr operating on bytes. Additionally, most output functions like print expect octets/bytes by default and will actually complain if you try to stuff anything else to them.
You may need to explicitly encode/decode your output if it is known to be in some encoding, but more details can only be added if you ask another specific question for each problematic part of your program.
I've tried everything Google and StackOverflow have recommended (that I could find) including using Encode. My code works but it just uses UTF8 and I get the wide character warnings. I know how to work around those warnings but I'm not using UTF8 for anything else so I'd like to just convert it and not have to adapt the rest of my code to deal with it. Here's my code:
my $xml = XMLin($content);
# Populate the #titles array with each item title.
my #titles;
for my $item (#{$xml->{channel}->{item}}) {
my $title = Encode::decode_utf8($item->{title});
#my $title = $item->{title};
#utf8::downgrade($title, 1);
Encode::from_to($title, 'utf8', 'iso-8859-1');
push #titles, $title;
}
return #titles;
Commented out you can see some of the other things I've tried. I'm well aware that I don't know what I'm doing here. I just want to end up with a plain old ASCII string though. Any ideas would be greatly appreciated. Thanks.
The answer depends on how you want to use the title. There are 3 basic ways to go:
Bytes that represent a UTF-8 encoded string.
This is the format that should be used if you want to store the UTF-8 encoded string outside your application, be it on disk or sending it over the network or anything outside the scope of your program.
A string of Unicode characters.
The concept of characters is internal to Perl. When you perform Encode::decode_utf8, then a bunch of bytes is attempted to be converted to a string of characters, as seen by Perl. The Perl VM (and the programmer writing Perl code) cannot externalize that concept except through decoding UTF-8 bytes on input and encoding them to UTF-8 bytes on output. For example, your program receives two bytes as input that you know they represent UTF-8 encoded character(s), let's say 0xC3 0xB6. In that case decode_utf8 returns a representation that instead of two bytes, sees one character: ö.
You can then proceed to manipulate that string in Perl. To illustrate the difference further, consider the following code:
my $bytes = "\xC3\xB6";
say length($bytes); # prints "2"
my $string = decode_utf8($bytes);
say length($string); # prints "1"
The special case of ASCII, a subset of UTF-8.
ASCII is a very small subset of Unicode, where characters in that range are represented by a single byte. Converting Unicode into ASCII is an inherently lossy operation, as most of the Unicode characters are not ASCII characters. You're either forced to drop every character in your string which is not in ASCII or try to map from a Unicode character to their closest ASCII equivalents (which isn't possible in the vast majority of cases), when trying to coerce a Unicode string to ASCII.
Since you have wide character warnings, it means that you're trying to manipulate (possibly output) Unicode characters that cannot be represented as ASCII or ISO-8859-1.
If you do not need to manipulate the title from your XML document as a string, I'd suggest you leave it as UTF-8 bytes (I'd mention that you should be careful not to mix bytes and characters in strings). If you do need to manipulate it, then decode, manipulate, and on output encode it in UTF-8.
For further reading, please use perldoc to study perlunitut, perlunifaq, perlunicode, perluniintro, and Encode.
Although this is an old question, I just spent several hours (!) trying to do more or less the same thing! That is: read data from a UTF-8 XML file, and convert that data into the Windows-1252 codepage (I could also have used Latin1, ISO-8859-1 etc.) in order to be able to create filenames with accented letters.
After much experimentation, and even more searching, I finally managed to get the conversion working. The "trick" is to use Encode::encode instead of Encode::decode.
For example, given the code in the original question, the correct (or at least one :-) way to convert from UTF-8 would be:
my $title = Encode::encode("Windows-1252", $item->{title});
or
my $title = Encode::encode("ISO-8859-1", $item->{title});
or
my $title = Encode::encode("<your-favourite-codepage-here>", $item->{title});
I hope this helps others having similar problems!
You can use the following line to simply get rid of the warning. This assumes that you want to use UTF8, which shouldn't normally be a problem.
binmode(STDOUT, ":encoding(utf8)");
I'm running Perl 5.10.0 and Postgres 8.4.3, and strings into a database, which is behind a DBIx::Class.
These strings should be in UTF-8, and therefore my database is running in UTF-8. Unfortunatly some of these strings are bad, containing malformed UTF-8, so when I run it I'm getting an exception
DBI Exception: DBD::Pg::st execute failed: ERROR: invalid byte sequence for encoding "UTF8": 0xb5
I thought that I could simply ignore the invalid ones, and worry about the malformed UTF-8 later, so using this code, it should flag and ignore the bad titles.
if(not utf8::valid($title)){
$title="Invalid UTF-8";
}
$data->title($title);
$data->update();
However Perl seems to think that the strings are valid, but it still throws the exceptions.
How can I get Perl to detect the bad UTF-8?
First off, please follow the documentation - the utf8 module should only be used in the 'use utf8;' form to indicate that your source code is UTF-8 instead of Latin-1. Don't use any of the utf8 functions.
Perl makes the distinction between bytes and UTF-8 strings. In byte mode, Perl doesn't know or care what encoding you are using, and will use Latin-1 if you print it. Take for example the Euro sign (€). In UTF-8 this is 3 bytes, 0xE2, 0x82, 0xAC. If you print the length of these bytes, Perl will return 3. Again, it doesn't care about the encoding. It can be any bytes or any encoding, legal or illegal.
If you use the Encode module and call Encode::decode("UTF-8', $bytes) you will get a new string which has the so-called UTF8 flag set. Perl now knows your string is in UTF-8, and will return a length of 1.
The problem that utf8::valid only applies to the second type of string. Your strings are probably in the first form, byte mode, and utf8::valid just returns true for anything in byte form. This is documented in the perldoc.
The solution is to get Perl to decode your byte strings as UTF-8, and detect any errors. This can be done with FB_CROAK as brian d foy explains:
my $ustring =
eval { decode( 'UTF-8', $byte_string, FB_CROAK ) }
or die "Could not decode string: $#";
You can then catch that error and skip those invalid strings.
Or if you know your code is mostly UTF-8 with a few invalid sequences here and there, you can use:
my $ustring = decode( 'UTF-8', $byte_string );
which uses the default mode of FB_DEFAULT, replacing invalid characters with U+FFFD, the Unicode REPLACEMENT CHARACTER (diamond with question mark in it).
You can then pass the string directly to your database driver in most cases. Some drivers may require you to re-encode the string back to byte form first:
my $byte_string = encode('UTF-8', $ustring);
There are also regexes online that you can use to check for valid UTF-8 sequences before calling decode (check other Stack Overflow answers). If you use those regexes, you don't need to do any encoding or decoding.
Finally, please use UTF-8 rather than utf8 in your calls to decode. The latter is more lax and allows some invalid UTF-8 sequences (such as sequences outside the Unicode range) to be allowed through.
How are you getting your strings? Are you sure that Perl thinks that they are UTF-8 already? If they aren't decoded yet (that is, octets interpreted as some encoding), you need to do that yourself:
use Encode;
my $ustring =
eval { decode( 'utf8', $byte_string, FB_CROAK ) }
or die "Could not decode string: $#";
Better yet, if you know that your source of strings is already UTF-8, you need to read that source as UTF-8. Look at the code you have that gets the strings to see if you are doing that properly.
As the documentation for utf8::valid points out, it returns true if the string is marked as UTF-8 and it's valid UTF-8, or if the string isn't UTF-8 at all. Although it's impossible to tell without seeing the code in context and knowing what the data is, most likely what you want isn't the "valid utf8" check at all; probably you just need to do
$data->title( Encode::encode("UTF-8", $title) )