I'm using notepad++ (v6.5.3) and I constantly have to change the size of the tab for viewing some results. Not that it's taking me a lot of time to do it manually everytime, but it would be great if I could optimize that.
Is there a way to do so? Would a macro be the solution, or are they just for typing stuff?
Thanks a lot!
Ok, there's an easy way how you can achieve this - I have tested it right now:
Install AutoHotKey (or start portable version which runs without installation)
In Windows 7 and above, ensure you launched AutoHotKey as Administrator (otherwise you get inconsistencies in its behavior) - if not sure, exit it and restart it as administrator
Right click Autohotkey tray icon and select Edit This Script
Import the macro below this list at the end of the AutoHotKey script file and save the file
Right click Autohotkey tray icon and select Reload This Script.
–– This was end of general steps, now let's go with your macro: ––
In N++, display Preferences window and press its Close button1 at the bottom (NOT at the top-right corner)
Now you can use shortcuts Win+F2 and Win+F3 to switch different tab sizes instantly
SendMode Input
DetectHiddenWindows, On
SetTitleMatchMode, RegEx
;--------------------------------- Hotkeys for Notepad++ only
#IfWinActive ahk_class Notepad\+\+
#F2::Send {F10}{Right 6}{Down}{Enter}{Tab 2}{Space}16{Enter}{Tab 3}{Space}
#F3::Send {F10}{Right 6}{Down}{Enter}{Tab 2}{Space}4{Enter}{Tab 3}{Space}
#IfWinActive
1) Important: N++ user experience provided in dialog boxes is absolutely terrible. There are no anchors where you can fix focus when using keyboard. Thus you always need to perform step 4 manually when leaving Preferences dialog box otherwise the macros would send keys into incorect window page OR at correct page but incorrect control. Preferences dialog window remembers selected page and control. Macros I created for you therefore assume that correct page is already listed and button Close was recently focused.
Good news is Notepad++ windows with this weird behavior are rare exception from general user experience. In other places in N++ (or in other apps) where user interface components (menus, dialogs etc.) always start from the same point you do not need any special precautions like the one in step 4.
Adjust the macros as you like:
you can create more of them
you can adjust the numbers "16" and "4" typed into tab size input box
you can change shortcut keys to something else
you can replace sending keys with sending mouse clicks at desired screen/window positions
you can achieve many other useful shortcuts in N++ and in all other apps – check AHK deeper!
Related
Sometimes when closing vscode, or a tab therein, I get a dialogue asking "Do you want to save the changes you made to filename?" However, the unsaved edits are actually from a previous session that was closed without such a query, probably when turning off the computer, so I can't remember if it was meaningful edits, or maybe just an accidental key-press, like a shortcut gone wrong; and doing undo to revisit the last edits doesn't work either.
My question: How can I see the diff between the saved version of a file, and the version in the editor window? I think it would be nicest just to have a "show diff" option in the dialogue, but for now I'm also happy with a command line diff command.
I'm using ubuntu 20.04.
I'm using VSCode version 1.52.1 on MacOS and I had a similar problem that may not be the same problem, but I'm guessing it will work for you as well.
When you're in the Explorer view, in the upper left part of Explorer you have your "Open Editors." If that shows a dot to the left indicating that the buffer has changes in it, you can right click the file name and select "Compare with Saved." This will open another buffer to the side that will show you any unsaved changes.
To get rid of that window (it took me a bit to figure this out I'm sorry to say!), you can click the 'X' to the left of the extra buffer in "Open Editors."
Hope this works for you!
A few bright notes for the keyboard players out there:
The command you are asking about has a default shortcut. Unless you've applied a keyboard map extension, the Ctrl+Kd arpeggio opens the very same diff view between the active and saved versions of the current file. The default shortcut to close an editor tab (be it the diff or a file or anything at all) is Ctrl+W.
The command, like any command in VSCode, is also accessible via the Ctrl+Shift+P command dropdown (on Linux, F1 opens it too). Start typing e.g. compa sav (it saves your keyboard wear and tear to shorten words to a prefix which is unambiguous enough), and the list will shrink dynamically to just a few commands. Yours is File: Compare Active File with Saved. When it's close to the top enough, navigate the list of commands with the down arrow and execute it with Enter. As a bonus, you may click on the little gear to the right of the command currently highlighted in the list and redefine its shortcut, if you use it very often and prefer a chord shortcut to the default arpeggio one. Sorry, there does not seem to be a shortcut in lieu of the gear click. If there is, please let me know!
But if you really, really want to right-click on the filename in the Open Editors view of the Explorer sidebar, you can open that view directly with, you guessed it, a shortcut: Ctrl+Ke. And if you change your mind on a dime right at this moment, or realize that you in fact never had a mouse to do the right-click in the first place, use Shift+F10 to drop down the "right-click menu", properly called the context menu, which you navigate with arrows and execute with Enter (that's kinda a common theme, as you probably noticed). This works mostly anywhere the right-click does.
While in the Open Editors view, to switch to an editor file tab, move the selection to the desired file. Press Space to bring the file into view but stay in the Open Editors view, or Enter to bring the file into view and shift the keyboard focus to it. Pressing Ctrl+Shift+E brings focus back to the editor from any view in the Explorer sidebar. The same shortcut moves focus to the Explorer sidebar from the editor.
Happy ♬ k'boarding ♬!
ctrl+shift+P (or command+shift+P on mac) and fuzzy search for "compare changes with saved files"
I have a need to use something else than the TAB key to achieve ALT+TAB functionality in Windows 10. (long story short - I'm using Parallells and remote desktop on a Mac, and need to keep the Remote Desktop setting "Apply Windows Key Combinations" set to "On this computer", so I can't just forward everything to the remote computer).
Using Autohotkey on the remote computer, I thought I could simply do something like
§::Send {Tab}
to be able to press ALT+§ instead of ALT+TAB, and have Parallells ignore it and just forward it as any other key (for example SHIFT+A to type an "A"). But it doesn't seem to work that way, nothing happens when holding down ALT and pressing § except a "pling" sound. Just pressing § alone prints a TAB character if I'm in a text editor.
I tried
^!§::Send ^!{Tab}
as well, same result.
For now I settled on using the following script instead, which lets me press § to bring up the ALT+TAB window, where I can either use arrow keys or the § key to select an application, and then Enter to switch to it:
§::Send ^!{Tab}
This is not bad, but it's annoying to have to use the Enter key to activate the window. So, is there any way to simply replace ALT+TAB with ALT+§ and get the normal functionality of the ALT+TAB window-switcher?
Use the hotkey <!§::AltTab.
<! means left alt and you can read more about AltTab here.
Also, AltTabMenuDismiss might be worth looking into related to the problem you outlined in the comments.
I'm usually a Gmail user but on my most recent gig have to use an Exchange account and so decided to give Apple Mail another try (after looking at a bunch of other options) but I digress.
I prefer the classic layout but don't like to group messages by conversation.
I'm looking for a way/script to use the "Show Related Messages" button, which you can add to the toolbar, so that I can bind it to a shortcut so I can quickly catch up on emails using no mouse clicks.
Is this possible or am I hoping for something not doable?
I'm running El Capitan in case that's an issue.
Thanks for your time!
If I'm understanding you correctly, you essentially want a keyboard shortcut to access the menu item Show Related Messages in the Mail application. You mention adding something to the toolbar, but then also say you don't wish to use any mouse clicks, so I'm going to assume that it doesn't really matter whether or not there's a shortcut on the toolbar—that your priority is using the keyboard to turn on/off the Show Related Messages option.
I'm using MacOS High Sierra, so my screenshots may look a little bit different to what you see on your system, but the process for El Capitan is the same or very similar.
Open up System Preferences and selected the Keyboard pane. In the left-hand list, select App Shortcuts:
Then click the + button to the right in order to create a new shortcut:
Choose the Mail application from the dropdown list, and enter the menu item for which you want the shortcut to apply; in this case, Show Related Messages. Note: It must be typed in exactly, including any capital letters that feature, and without any extra spaces that aren't appropriate. For example, "Show related messages" will not work.
Finally, highlight the Keyboard Shortcut box and press the key combo that you'd like to use as your shortcut. You can even use one that's already assigned in Mail to something else; the pre-existing shortcut will automatically get reassigned where possible.
Click the Add button.
From then on, you'll be able to use your shortcut to toggle the Show Related Messages option on/off.
Suppose I make a method signature change that breaks several callers, and I want to review the call sites manually to update them.
Once I change the signature, my "Problems" view shows, say, a dozen errors.
What keys can I hit to navigate through them while leaving the keyboard focus in the editor for fast fixups?
(It's been a while, but I think the Visual Studio equivalent is F8.)
Note that this question does not duplicate Eclipse: How to go to a error using only the keyboard (keyboard-shortcut)?, as that one seeks to navigate only between markers in the current file. In this case, I want to go to the next error regardless of which file it's in.
("Marker" is the general Eclipse term for errors, warnings, etc.)
The best I've come up with so far is Ctrl + F7 to flip to the Problems view, then ↓ to pick the topmost error, then Enter to go to it (which returns focus to the editor).
Here's a way to move to the next error, regardless of editor, in one keystroke. It's not perfect, but it works until it's fixed in Eclipse.
Open a "Markers" view. Click the down arrow at the top right, and choose "Configure Contents". Uncheck the show all box, and create the view to show only the problems you want to see. You'll probably want to deselect "warnings" and "errors" as well. Save it.
Click the same "Markers" down arrow, and choose "Group By". Select "None". This is important because you don't want the parent tree level nodes to show, otherwise some of your "next" actions will take you to those, which don't represent an error.
In Eclipse -> preferences -> keys, search for "Markers". If there is not a keystroke bound to the Markers view, create one. I use Ctrl + Shift + M
Get a keyboard hotkey tool like AutoHotKey (for PC's) or iKey for the Mac. I'm using iKey, but there are plenty of other Mac tools you can use. In your hotkey tool, define an action for the keystroke you want to use for "next error". I chose the standard CMD + .
For that keystroke/action in your hotkey tool, generate 3 keystrokes in the following order:
Ctrl + Shift + M
Down arrow
Enter
Of course, you'll want to change the first one to whatever you picked for yours. You'll probably want to restrict that action to be executed only when Eclipse is the current application.
Save that, create some compile errors, and test it.
Try Ctrl + 3 for Quick access popup window.
If the "Markers view" is not already visible, then type in "markers", in the searchbox on the popup window. Once you have selected it, it should stay available, when you press Ctrl + 3 the next time around.
I just had the same problem, after refactoring some parts of code. I had a lot of errors in different files and i had to go through all of those.
I used the following solution:
Mark all (relevant) entries in the Problems view.
To do this switch to the Problems view using Ctrl+F7 and select the entries with Shift+↓/↑
You can also select all entries using Ctrl+A
Open the marked errors by pressing ↵.
Every file containing at least one marked error will be opened.
The cursor will automatically select one error/file, as if you open only this specific entry
Fix the errors in the opened file.
Here you can use Ctrl+. to navigate to next error inside this file
Close the file using Ctrl+W when your done.
Eclipse will automatically focus the next file and you can go back to step 3
In my case this solution was much faster then switching to the Problems view each time.
There's an Eclipse bug entered for this that has an attachment that looks like it does what you want.
You could use AutoHotkey:
save the mouse position, send a mouse event to click on the arrow in CDT console and then return the mouse back to it's original location. Record the mouse coords with window spy or use autohotkey's search by image function (first capture the images of two arrows with printscreen into bitmaps).
I could have sworn I saw it once before in a screencast where someone had the find/replace window docked in their Eclipse environment.
However looking through the list of options in "Window > Show" the closest thing I can find is the Search window.
I find that I use it quite a bit and with larger monitors these days I figure I could afford to have it open in my perspective all the time.
Is this possible?
Thanks.
One poor-man's workaround is to dock a view that you don't need in a part of Eclipse where you want the find/replace view and then place the find/replace dialog on top of that like this:
Clearly this is a huge kludge but it does work.
I am not sure about that, since Fast views are:
icons allowing users to quickly display different views that have been created as fast views
And the search/replace is a Dialog, not a View..
(source: bpsite.net)
(That Dialog box is not like Views, which support editors, also have their own menus. Some views also have their own toolbars.)
The help page mentions:
Fast views are hidden views that can be quickly opened and closed. They work like other views except they do not take up space in your Workbench window.
This might not be an exact answer for the question. But this works like a charm.
Press ctrl + j and keep typing...
Use ctrl + k to go on
Use shift key wherever required.
Use Edit > Incremental Find Next (Ctrl+J) or Edit > Incremental Find Previous (Ctrl+Shift+J) to enter the incremental find mode, and start typing the string to match. Matches are found incrementally as you type. The search string is shown in the status line. Press Ctrl+J or Ctrl+Shift+J to go to the next or previous match. Press Enter or Esc to exit incremental find mode.