enter code hereFind my script and the error messages I'm getting on some of get-distribution group attributes.
The attributes are:
managedby
memberjoinrestriction
memberdepartrestriction
requiresenderauthenticationenabled
When i exclude the the above attributes, the scripts returns well without error.
Assist me to understand where i'm doing it wrong.
The script: The script is supposed to bulk export information for distribution groups
$Groups = Get-DistributionGroup –ResultSize Unlimited
$Groups | ForEach-Object {
$group = $_.Name
$primarySMTPAddress = $_.PrimarySMTPAddress
$managedby = $._ManagedBy
$memberjoinrestriction = $._MemberJoinRestriction
$memberdepartrestriction = $._MemberDepartRestriction
$requiresenderauthenticationenabled = $._RequireSenderAuthenticationEnabled
Get-DistributionGroupMember $group | ForEach-Object {
New-Object -TypeName PSObject -Property #{
Group = $group
GroupPrimarySMTPAddress = $primarySMTPAddress
Member = $_.Name
ManagedBy = $managedby
MemberJoinRestriction = $memberjoinrestriction
MemberDepartRestriction = $memberdepartrestriction
RequireSenderAuthenticationEnabled = $requiresenderauthenticationenabled
EmailAddress = $_.PrimarySMTPAddress
}}} | Export-CSV "C:\DistributionGroupinfov1.csv" -NoTypeInformation -Encoding UTF8```
The error message is
```$._ManagedBy : The term '$._ManagedBy' is not recognized as the name of a cmdlet, function, script file, or operable program. Check the spelling of the name, or if a path was included,
verify that the path is correct and try again.
At line:5 char:14
+ $managedby = $._ManagedBy
+ ~~~~~~~~~~~~
+ CategoryInfo : ObjectNotFound: ($._ManagedBy:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
$._MemberJoinRestriction : The term '$._MemberJoinRestriction' is not recognized as the name of a cmdlet, function, script file, or operable program. Check the spelling of the name, or if
a path was included, verify that the path is correct and try again.
At line:6 char:26
+ $memberjoinrestriction = $._MemberJoinRestriction
+ ~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : ObjectNotFound: ($._MemberJoinRestriction:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
$._MemberDepartRestriction : The term '$._MemberDepartRestriction' is not recognized as the name of a cmdlet, function, script file, or operable program. Check the spelling of the name,
or if a path was included, verify that the path is correct and try again.
At line:7 char:28
+ $memberdepartrestriction = $._MemberDepartRestriction
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : ObjectNotFound: ($._MemberDepartRestriction:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
$._RequireSenderAuthenticationEnabled : The term '$._RequireSenderAuthenticationEnabled' is not recognized as the name of a cmdlet, function, script file, or operable program. Check the
spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:8 char:39
+ ... resenderauthenticationenabled = $._RequireSenderAuthenticationEnabled
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : ObjectNotFound: ($._RequireSenderAuthenticationEnabled:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException```
When i run the command individually with a single attribute, it returns well without error
```Get-DistributionGroup -identity "support" | Format-table RequireSenderAuthenticationEnabled```
Im trying to do an invoke command inside a function, but having difficulty getting defined variables to pass through.
function Set-RemoteLocalAdmin {
[CmdletBinding()]
param (
[Parameter(Mandatory)]
[string]$ComputerName,
[String] $UserId
)
$sb = {
param($userid)
add-LocalGroupMember -Group "Administrators" -Member "$UserId"}
Invoke-Command -ComputerName $ComputerName -Scriptblock $sb -argumentlist $userid
}
Errors:
The term '' is not recognized as the name of a cmdlet, function, script file, or operable program. Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
+ CategoryInfo : ObjectNotFound: (:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
+ PSComputerName : COMPUTERNAME-1
The term 'param' is not recognized as the name of a cmdlet, function, script file, or operable program. Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
+ CategoryInfo : ObjectNotFound: (param:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
+ PSComputerName : COMPUTERNAME-1
Member BUILTIN\ was not found in group Administrators.
+ CategoryInfo : ObjectNotFound: (BUILTIN:String) [Add-LocalGroupMember], MemberNotFoundException
+ FullyQualifiedErrorId : MemberNotFound,Microsoft.PowerShell.Commands.AddLocalGroupMemberCommand
+ PSComputerName : COMPUTERNAME-1
What am I missing here?
Thanks in advance.
When i tried run this PS Script :
" Get-ObjectAcl -SamAccountName delegate -ResolveGUIDs | ? {$_.ActiveDirectoryRights -eq "GenericAll"} "
i got error like that:
Get-ObjectAcl : The term 'Get-ObjectAcl' is not recognized as the name of a cmdlet, function, script file, or operable
program. Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:1
Get-ObjectAcl -SamAccountName delegate -ResolveGUIDs | ? {$_.ActiveDi ...
+ CategoryInfo : ObjectNotFound: (Get-ObjectAcl:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
I searched but i can't find how can i use module Add-ObjectAcl and Get-ObjectAcl
What am I doing wrong here? I am trying to open a second PS1 file if True but an error is thrown (shown below).
#ABOUT
#GLOBALS
$userID = "admin"
$pswrd = "test"
$name = Read-Host 'What is your username?'
$pass = Read-Host 'And your password?' #-AsSecureString | ConvertFrom-SecureString
#$script = '.\sdsSysMain.ps1'
if($name -eq $userID -and $pass -eq $pswrd) #or blank?
{
#write-host "Well done! You're in. "
#Start-Sleep -s 5
Powershell -noexit ".\sdsSysMain.ps1"
}
elseif($name -ne $userID -or $pass -ne $pswrd)
{
write-host "Login Failed... :("
}
This is the error I'm getting:
powershell.exe : The term '.\sdsSysMain.ps1' is not recognized as the name of a cmdlet, function
At C:\Users\1234\Documents\Projects\sdsSys\sdsSysLogin.ps1:19 char:15
+ Powershell <<<< -noexit ".\sdsSysMain.ps1"
+ CategoryInfo : NotSpecified: (The term '.\sds...mdlet, function:String) [],
RemoteException
+ FullyQualifiedErrorId : NativeCommandError
, script file, or operable program. Check the spelling of the name, or if a path was included,
verify that the path is correct and try again.
At line:1 char:17
+ .\sdsSysMain.ps1 <<<<
+ CategoryInfo : ObjectNotFound: (.\sdsSysMain.ps1:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
The error is rather self-explanatory. The script doesn't find sdsSysMain.ps1 in the current working directory. You can output the current working directory in your script like this:
(Get-Location).Path
If you want to run sdsSysMain.ps1 from the same directory as the script calling it, change this:
Powershell -noexit ".\sdsSysMain.ps1"
into this:
$scriptPath = Split-Path -Parent $script:MyInvocation.MyCommand.Path
Powershell -NoExit -File "$scriptPath\sdsSysMain.ps1"
Using PowerShell ISE,
If I open the file below by clicking on the .ps1 file in windows explorer, when I run it with the green arrow, it works.
If use File->Open the same file, when I click the green arrow I get errors.
If I open it by clicking and then load it, it's fine, so something (the path?) is getting set when I double click that is not the other way...
Let me clarify... If I open the file one way(double click) it 'compiles' fine, if I open it the other way (file->Open) the exact same file does not 'compile'. I'm hoping to figure out why this is. My guess is that the path variable it uses to find the other files needed is set different via the two methods of opening (because many of the errors are 'not found')
here is the code of the file (it basically just calls a bunch of external stuff)
###########################################################
# RUN (hit the green arrow) TO INITIALIZE
############################################################
############################################################
# set defaults
$path = Get-Location
$ProjectName = $path.Path
$ProjectName = $ProjectName.Replace("D:\Project Files\", "")
$ProjectName = $ProjectName.Replace("\_Powershell", "")
$ProjectName = $ProjectName.Replace("\WebApp", "")
$ProjectName = $ProjectName.Replace("\Webapp", "")
write-host "Project Name found: " $ProjectName
$Project = $ProjectName
$RootPath = 'D:\Project Files\' + $Project + '\WebApp'
$ModulePath = 'D:\Project Files\' + $Project + '\WebApp\_PowerShell'
############################################################
# call this one to remove and reload the modules (if modules are modified)
function ReloadTemplates {
RemoveLoadedModule WPK
RemoveLoadedModule JcdcAddFileToProjectGui
RemoveLoadedModule JcdcEoAndMap
RemoveLoadedModule JcdcEoAndMapGui
RemoveLoadedModule JcdcDal
RemoveLoadedModule JcdcDalGui
RemoveLoadedModule JcdcBll
RemoveLoadedModule JcdcBLLGui
RemoveLoadedModule JcdcView
RemoveLoadedModule JcdcViewGui
RemoveLoadedModule JcdcController
RemoveLoadedModule JcdcControllerGui
RemoveLoadedModule JcdcAutoMap
RemoveLoadedModule JcdcAutoMapGui
RemoveLoadedModule JcdcReport
RemoveLoadedModule JcdcReportGui
RemoveLoadedModule JcdcCv
RemoveLoadedModule JcdcCvGui
RemoveLoadedModule ReadWriteXML
# load the Templates
LoadTemplates
}
function RemoveLoadedModule {
param($PathAndName)
if(Get-Module -name $PathAndName)
{
Remove-Module $PathAndName
}
}
############################################################
# call this one to load the modules
function LoadTemplates {
Import-Module WPK
Import-Module "$ModulePath\JcdcAddFileToProjectGui.psm1"
Import-Module "$ModulePath\JcdcEoAndMap.psm1"
Import-Module "$ModulePath\JcdcEoAndMapGui.psm1"
Import-Module "$ModulePath\JcdcDal.psm1"
Import-Module "$ModulePath\JcdcDalGui.psm1"
Import-Module "$ModulePath\JcdcBll.psm1"
Import-Module "$ModulePath\JcdcBLLGui.psm1"
Import-Module "$ModulePath\JcdcView.psm1"
Import-Module "$ModulePath\JcdcViewGui.psm1"
Import-Module "$ModulePath\JcdcController.psm1"
Import-Module "$ModulePath\JcdcControllerGui.psm1"
Import-Module "$ModulePath\JcdcAutoMap.psm1"
Import-Module "$ModulePath\JcdcAutoMapGui.psm1"
Import-Module "$ModulePath\JcdcReport.psm1"
Import-Module "$ModulePath\JcdcReportGui.psm1"
Import-Module "$ModulePath\JcdcCv.psm1"
Import-Module "$ModulePath\JcdcCvGui.psm1"
Import-Module "$ModulePath\ReadWriteXML.psm1"
Initialize-AddFileToProject $RootPath $Project
Initialize-EOMAPGui $RootPath $Project
Initialize-DALGui $RootPath $Project
Initialize-BLLGui $RootPath $Project
Initialize-ViewGui $RootPath $Project
Initialize-ControllerGui $RootPath $Project
Initialize-AutoMapGui $RootPath $Project
Initialize-ReportGui $RootPath $Project
Initialize-CVGui $RootPath $Project
Initialize-XMLArguments
}
############################################################
# load the Templates on Run (when green arrow is clicked)
ReloadTemplates
############################################################
# Type one of the following in the command window
#Select-A + <tab> = Select-AddFileToProject -To create file to add to project
#Select-B + <tab> = Select-BLLWhatToBuild -To add a BLL
#Select-C + <tab> = Select-ControllerWhatToBuild -To add a Controller
#Select-D + <tab> = Select-DALWhatToBuild -To add a DAL
#Select-E + <tab> = Select-EoAndMapBuild -To add a Eo and Map
#Select-M + <tab> = Select-MapBuild -To add a AutoMap
#Select-R + <tab> = Select-ReportWhatToBuild -To add a Report
#Select-Vi + <tab> = Select-ViewWhatToBuild -To add a View
#Select-Vm + <tab> = Select-VmCvOrExcel -To add a CV, VM, D:\PowerShellTemplatesArgsor Excel
Here are the errors
PS U:\> D:\Project Files\CIS3G\Webapp\_Powershell\ManualRun.ps1
Project Name found: U:\
Import-Module : The specified module 'D:\Project Files\U:\\WebApp\_PowerShell\JcdcAddFileToProjectGui.psm1' was not loaded because no valid module file was found in any module direc
tory.
At D:\Project Files\CIS3G\Webapp\_Powershell\ManualRun.ps1:61 char:18
+ Import-Module <<<< "$ModulePath\JcdcAddFileToProjectGui.psm1"
+ CategoryInfo : ResourceUnavailable: (D:\Project File...ProjectGui.psm1:String) [Import-Module], FileNotFoundException
+ FullyQualifiedErrorId : Modules_ModuleNotFound,Microsoft.PowerShell.Commands.ImportModuleCommand
Import-Module : The specified module 'D:\Project Files\U:\\WebApp\_PowerShell\JcdcEoAndMap.psm1' was not loaded because no valid module file was found in any module directory.
At D:\Project Files\CIS3G\Webapp\_Powershell\ManualRun.ps1:62 char:18
+ Import-Module <<<< "$ModulePath\JcdcEoAndMap.psm1"
+ CategoryInfo : ResourceUnavailable: (D:\Project File...dcEoAndMap.psm1:String) [Import-Module], FileNotFoundException
+ FullyQualifiedErrorId : Modules_ModuleNotFound,Microsoft.PowerShell.Commands.ImportModuleCommand
Import-Module : The specified module 'D:\Project Files\U:\\WebApp\_PowerShell\JcdcEoAndMapGui.psm1' was not loaded because no valid module file was found in any module directory.
At D:\Project Files\CIS3G\Webapp\_Powershell\ManualRun.ps1:63 char:18
+ Import-Module <<<< "$ModulePath\JcdcEoAndMapGui.psm1"
+ CategoryInfo : ResourceUnavailable: (D:\Project File...oAndMapGui.psm1:String) [Import-Module], FileNotFoundException
+ FullyQualifiedErrorId : Modules_ModuleNotFound,Microsoft.PowerShell.Commands.ImportModuleCommand
Import-Module : The specified module 'D:\Project Files\U:\\WebApp\_PowerShell\JcdcDal.psm1' was not loaded because no valid module file was found in any module directory.
At D:\Project Files\CIS3G\Webapp\_Powershell\ManualRun.ps1:64 char:18
+ Import-Module <<<< "$ModulePath\JcdcDal.psm1"
+ CategoryInfo : ResourceUnavailable: (D:\Project File...ll\JcdcDal.psm1:String) [Import-Module], FileNotFoundException
+ FullyQualifiedErrorId : Modules_ModuleNotFound,Microsoft.PowerShell.Commands.ImportModuleCommand
Import-Module : The specified module 'D:\Project Files\U:\\WebApp\_PowerShell\JcdcDalGui.psm1' was not loaded because no valid module file was found in any module directory.
At D:\Project Files\CIS3G\Webapp\_Powershell\ManualRun.ps1:65 char:18
+ Import-Module <<<< "$ModulePath\JcdcDalGui.psm1"
+ CategoryInfo : ResourceUnavailable: (D:\Project File...JcdcDalGui.psm1:String) [Import-Module], FileNotFoundException
+ FullyQualifiedErrorId : Modules_ModuleNotFound,Microsoft.PowerShell.Commands.ImportModuleCommand
Import-Module : The specified module 'D:\Project Files\U:\\WebApp\_PowerShell\JcdcBll.psm1' was not loaded because no valid module file was found in any module directory.
At D:\Project Files\CIS3G\Webapp\_Powershell\ManualRun.ps1:66 char:18
+ Import-Module <<<< "$ModulePath\JcdcBll.psm1"
+ CategoryInfo : ResourceUnavailable: (D:\Project File...ll\JcdcBll.psm1:String) [Import-Module], FileNotFoundException
+ FullyQualifiedErrorId : Modules_ModuleNotFound,Microsoft.PowerShell.Commands.ImportModuleCommand
Import-Module : The specified module 'D:\Project Files\U:\\WebApp\_PowerShell\JcdcBLLGui.psm1' was not loaded because no valid module file was found in any module directory.
At D:\Project Files\CIS3G\Webapp\_Powershell\ManualRun.ps1:67 char:18
+ Import-Module <<<< "$ModulePath\JcdcBLLGui.psm1"
+ CategoryInfo : ResourceUnavailable: (D:\Project File...JcdcBLLGui.psm1:String) [Import-Module], FileNotFoundException
+ FullyQualifiedErrorId : Modules_ModuleNotFound,Microsoft.PowerShell.Commands.ImportModuleCommand
Import-Module : The specified module 'D:\Project Files\U:\\WebApp\_PowerShell\JcdcView.psm1' was not loaded because no valid module file was found in any module directory.
At D:\Project Files\CIS3G\Webapp\_Powershell\ManualRun.ps1:68 char:18
+ Import-Module <<<< "$ModulePath\JcdcView.psm1"
+ CategoryInfo : ResourceUnavailable: (D:\Project File...l\JcdcView.psm1:String) [Import-Module], FileNotFoundException
+ FullyQualifiedErrorId : Modules_ModuleNotFound,Microsoft.PowerShell.Commands.ImportModuleCommand
Import-Module : The specified module 'D:\Project Files\U:\\WebApp\_PowerShell\JcdcViewGui.psm1' was not loaded because no valid module file was found in any module directory.
At D:\Project Files\CIS3G\Webapp\_Powershell\ManualRun.ps1:69 char:18
+ Import-Module <<<< "$ModulePath\JcdcViewGui.psm1"
+ CategoryInfo : ResourceUnavailable: (D:\Project File...cdcViewGui.psm1:String) [Import-Module], FileNotFoundException
+ FullyQualifiedErrorId : Modules_ModuleNotFound,Microsoft.PowerShell.Commands.ImportModuleCommand
Import-Module : The specified module 'D:\Project Files\U:\\WebApp\_PowerShell\JcdcController.psm1' was not loaded because no valid module file was found in any module directory.
At D:\Project Files\CIS3G\Webapp\_Powershell\ManualRun.ps1:70 char:18
+ Import-Module <<<< "$ModulePath\JcdcController.psm1"
+ CategoryInfo : ResourceUnavailable: (D:\Project File...Controller.psm1:String) [Import-Module], FileNotFoundException
+ FullyQualifiedErrorId : Modules_ModuleNotFound,Microsoft.PowerShell.Commands.ImportModuleCommand
Import-Module : The specified module 'D:\Project Files\U:\\WebApp\_PowerShell\JcdcControllerGui.psm1' was not loaded because no valid module file was found in any module directory.
At D:\Project Files\CIS3G\Webapp\_Powershell\ManualRun.ps1:71 char:18
+ Import-Module <<<< "$ModulePath\JcdcControllerGui.psm1"
+ CategoryInfo : ResourceUnavailable: (D:\Project File...trollerGui.psm1:String) [Import-Module], FileNotFoundException
+ FullyQualifiedErrorId : Modules_ModuleNotFound,Microsoft.PowerShell.Commands.ImportModuleCommand
Import-Module : The specified module 'D:\Project Files\U:\\WebApp\_PowerShell\JcdcAutoMap.psm1' was not loaded because no valid module file was found in any module directory.
At D:\Project Files\CIS3G\Webapp\_Powershell\ManualRun.ps1:72 char:18
+ Import-Module <<<< "$ModulePath\JcdcAutoMap.psm1"
+ CategoryInfo : ResourceUnavailable: (D:\Project File...cdcAutoMap.psm1:String) [Import-Module], FileNotFoundException
+ FullyQualifiedErrorId : Modules_ModuleNotFound,Microsoft.PowerShell.Commands.ImportModuleCommand
Import-Module : The specified module 'D:\Project Files\U:\\WebApp\_PowerShell\JcdcAutoMapGui.psm1' was not loaded because no valid module file was found in any module directory.
At D:\Project Files\CIS3G\Webapp\_Powershell\ManualRun.ps1:73 char:18
+ Import-Module <<<< "$ModulePath\JcdcAutoMapGui.psm1"
+ CategoryInfo : ResourceUnavailable: (D:\Project File...AutoMapGui.psm1:String) [Import-Module], FileNotFoundException
+ FullyQualifiedErrorId : Modules_ModuleNotFound,Microsoft.PowerShell.Commands.ImportModuleCommand
Import-Module : The specified module 'D:\Project Files\U:\\WebApp\_PowerShell\JcdcReport.psm1' was not loaded because no valid module file was found in any module directory.
At D:\Project Files\CIS3G\Webapp\_Powershell\ManualRun.ps1:74 char:18
+ Import-Module <<<< "$ModulePath\JcdcReport.psm1"
+ CategoryInfo : ResourceUnavailable: (D:\Project File...JcdcReport.psm1:String) [Import-Module], FileNotFoundException
+ FullyQualifiedErrorId : Modules_ModuleNotFound,Microsoft.PowerShell.Commands.ImportModuleCommand
Import-Module : The specified module 'D:\Project Files\U:\\WebApp\_PowerShell\JcdcReportGui.psm1' was not loaded because no valid module file was found in any module directory.
At D:\Project Files\CIS3G\Webapp\_Powershell\ManualRun.ps1:75 char:18
+ Import-Module <<<< "$ModulePath\JcdcReportGui.psm1"
+ CategoryInfo : ResourceUnavailable: (D:\Project File...cReportGui.psm1:String) [Import-Module], FileNotFoundException
+ FullyQualifiedErrorId : Modules_ModuleNotFound,Microsoft.PowerShell.Commands.ImportModuleCommand
Import-Module : The specified module 'D:\Project Files\U:\\WebApp\_PowerShell\JcdcCv.psm1' was not loaded because no valid module file was found in any module directory.
At D:\Project Files\CIS3G\Webapp\_Powershell\ManualRun.ps1:76 char:18
+ Import-Module <<<< "$ModulePath\JcdcCv.psm1"
+ CategoryInfo : ResourceUnavailable: (D:\Project File...ell\JcdcCv.psm1:String) [Import-Module], FileNotFoundException
+ FullyQualifiedErrorId : Modules_ModuleNotFound,Microsoft.PowerShell.Commands.ImportModuleCommand
Import-Module : The specified module 'D:\Project Files\U:\\WebApp\_PowerShell\JcdcCvGui.psm1' was not loaded because no valid module file was found in any module directory.
At D:\Project Files\CIS3G\Webapp\_Powershell\ManualRun.ps1:77 char:18
+ Import-Module <<<< "$ModulePath\JcdcCvGui.psm1"
+ CategoryInfo : ResourceUnavailable: (D:\Project File...\JcdcCvGui.psm1:String) [Import-Module], FileNotFoundException
+ FullyQualifiedErrorId : Modules_ModuleNotFound,Microsoft.PowerShell.Commands.ImportModuleCommand
Import-Module : The specified module 'D:\Project Files\U:\\WebApp\_PowerShell\ReadWriteXML.psm1' was not loaded because no valid module file was found in any module directory.
At D:\Project Files\CIS3G\Webapp\_Powershell\ManualRun.ps1:78 char:18
+ Import-Module <<<< "$ModulePath\ReadWriteXML.psm1"
+ CategoryInfo : ResourceUnavailable: (D:\Project File...adWriteXML.psm1:String) [Import-Module], FileNotFoundException
+ FullyQualifiedErrorId : Modules_ModuleNotFound,Microsoft.PowerShell.Commands.ImportModuleCommand
The term 'Initialize-AddFileToProject' is not recognized as the name of a cmdlet, function, script file, or operable program. Check the spelling of the name, or if a path was includ
ed, verify that the path is correct and try again.
At D:\Project Files\CIS3G\Webapp\_Powershell\ManualRun.ps1:80 char:29
+ Initialize-AddFileToProject <<<< $RootPath $Project
+ CategoryInfo : ObjectNotFound: (Initialize-AddFileToProject:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
The term 'Initialize-EOMAPGui' is not recognized as the name of a cmdlet, function, script file, or operable program. Check the spelling of the name, or if a path was included, veri
fy that the path is correct and try again.
At D:\Project Files\CIS3G\Webapp\_Powershell\ManualRun.ps1:81 char:24
+ Initialize-EOMAPGui <<<< $RootPath $Project
+ CategoryInfo : ObjectNotFound: (Initialize-EOMAPGui:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
The term 'Initialize-DALGui' is not recognized as the name of a cmdlet, function, script file, or operable program. Check the spelling of the name, or if a path was included, verify
that the path is correct and try again.
At D:\Project Files\CIS3G\Webapp\_Powershell\ManualRun.ps1:82 char:22
+ Initialize-DALGui <<<< $RootPath $Project
+ CategoryInfo : ObjectNotFound: (Initialize-DALGui:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
The term 'Initialize-BLLGui' is not recognized as the name of a cmdlet, function, script file, or operable program. Check the spelling of the name, or if a path was included, verify
that the path is correct and try again.
At D:\Project Files\CIS3G\Webapp\_Powershell\ManualRun.ps1:83 char:22
+ Initialize-BLLGui <<<< $RootPath $Project
+ CategoryInfo : ObjectNotFound: (Initialize-BLLGui:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
The term 'Initialize-ViewGui' is not recognized as the name of a cmdlet, function, script file, or operable program. Check the spelling of the name, or if a path was included, verif
y that the path is correct and try again.
At D:\Project Files\CIS3G\Webapp\_Powershell\ManualRun.ps1:84 char:23
+ Initialize-ViewGui <<<< $RootPath $Project
+ CategoryInfo : ObjectNotFound: (Initialize-ViewGui:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
The term 'Initialize-ControllerGui' is not recognized as the name of a cmdlet, function, script file, or operable program. Check the spelling of the name, or if a path was included,
verify that the path is correct and try again.
At D:\Project Files\CIS3G\Webapp\_Powershell\ManualRun.ps1:85 char:29
+ Initialize-ControllerGui <<<< $RootPath $Project
+ CategoryInfo : ObjectNotFound: (Initialize-ControllerGui:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
The term 'Initialize-AutoMapGui' is not recognized as the name of a cmdlet, function, script file, or operable program. Check the spelling of the name, or if a path was included, ve
rify that the path is correct and try again.
At D:\Project Files\CIS3G\Webapp\_Powershell\ManualRun.ps1:86 char:26
+ Initialize-AutoMapGui <<<< $RootPath $Project
+ CategoryInfo : ObjectNotFound: (Initialize-AutoMapGui:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
The term 'Initialize-ReportGui' is not recognized as the name of a cmdlet, function, script file, or operable program. Check the spelling of the name, or if a path was included, ver
ify that the path is correct and try again.
At D:\Project Files\CIS3G\Webapp\_Powershell\ManualRun.ps1:87 char:25
+ Initialize-ReportGui <<<< $RootPath $Project
+ CategoryInfo : ObjectNotFound: (Initialize-ReportGui:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
The term 'Initialize-CVGui' is not recognized as the name of a cmdlet, function, script file, or operable program. Check the spelling of the name, or if a path was included, verify
that the path is correct and try again.
At D:\Project Files\CIS3G\Webapp\_Powershell\ManualRun.ps1:88 char:21
+ Initialize-CVGui <<<< $RootPath $Project
+ CategoryInfo : ObjectNotFound: (Initialize-CVGui:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
The term 'Initialize-XMLArguments' is not recognized as the name of a cmdlet, function, script file, or operable program. Check the spelling of the name, or if a path was included,
verify that the path is correct and try again.
At D:\Project Files\CIS3G\Webapp\_Powershell\ManualRun.ps1:89 char:28
+ Initialize-XMLArguments <<<<
+ CategoryInfo : ObjectNotFound: (Initialize-XMLArguments:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
Is there some way to set the path when I do a file open so this does not occur?
There are different versions of this folder and file for each project, as it's used to generate project specific code...
so the solution needs to work for that scenerio too please.
Not sure to understand your question, but if you want to really begin at the location of your script, you can use $MyInvocation automatic var.
$MyInvocation.MyCommand.Path will give you the path of your script (.PS1 file) and then you can use Split-Path to find its directory location. I think that in your case Get-Location does not always return the path you think about.
$ModulePath = 'D:\Project Files\' + $Project + '\WebApp\_PowerShell'
Import-Module "$ModulePath\JcdcAddFileToProjectGui.psm1"
Results in
'D:\Project Files\U:\WebApp_PowerShell\JcdcAddFileToProjectGui.psm1'
Windows does not allow more than one drive letter in a single path. Yours has U: in it. $Project = 'U:' at the time $ModulePath was evaluated. That is your starting working directory for PowerShell.
Bottom line is that you're using paths relative to where the script is run. When you open powershell, it sets starting location from your profile, or default location if you don't have one in your profile. When you launch from a file, it uses that file's location.
You seem to be hard coding a separate set of script + modules, etc., for each project, but they have defined names that are consistent across the range of projects. I suggest you hardcode the module locations in each script.
I'd also suggest that you reconsider this style of coding. It must be a nightmare to change something. What if you created a single script that loads a single module. Then create a config file for each project and a shortcut to your script that loads the main script with the customized parts read from the config file.
The modules lay in same directory like a script? If it true, then reason of issue is in curent directoty. Add folowing line in begin or before you operate with modules:
Set-Location "<...>"
and lets type path to the folder with your script instead <...>.
I personally like using the default Var $PSScriptRoot
In your case I would have started the script
Set-Location $PSScripRoot
this will set the location to where ever your script is this should make it so either a double click or an open file location and press play will excute your script
you can either add my line in front of $path = Get-Location or you can eliminate the $path line entirely and just use the $PSScriptRoot line but then you also need to replace the $path variable with $PSScriptRoot in your entire script
As others have said when you double click your script Powershell uses that path if you open manually via ISE it does not (it uses whatever the last path u set in ISE instead)
what the line Set-Location $PSScriptRoot does is take the local path of your script always regardless how you choose to start it
I hope this helps!