I pulled fresh copy of my project from Assembla git repository and restructured the whole project at my system and deleted some of useless classes and files from the project as well.
Now when i push it back into remote repository from my eclipse it does not work because of confliction of whole structures on both sides.
Please suggest what to do to push fresh copy of project in remote git repository on assembla.
Thanks
If you go to your repo at Assembla, in setting you can allow a force push. This is considered to be a dangerous push as you are rewriting history and will cause problems if others have your repo as well.
Once you have done that you can do a force push by adding -f to your push command:
git push -f origin master
This will replace the remote side with your master - completely, no merging or conflicts.
A less destructive way to push your commits is to pull the repo first and merge in the changes from the remote. You might want to consider rebasing since you are changing the structure so much, this will apply your changes on top of the remote changes.
Related
I created my first GitHub repository using GitHub Desktop (Windows). It is a real mess with many revisions that are quite meaningless and some versions of files that I would rather were never uploaded. This was the result of a lot of experimenting to get the feel for how things would appear on GitHub. I want to get rid of all the history versions.
I am tempted to just copy my files on my drive to another folder then delete the repository folder from my drive. Also delete it from GitHub.
Then create a new repository with GitHub Desktop, perhaps with the same name or with a different name then rename it to the original. Could it be a simple as that or will GitHub still retain the files somewhere?
I haven't tried this because in my searching I keep finding all the complex steps to be performed to remove histories or remove files.
I sort of feel that what I am proposing is too simple.
Any opinions?
All of this got too confusing.
I just did what I said in the start of the thread.
It seems GitHub Desktop has some Username/Password problem and won't let me "Publish branch".
So I went to GitHub and created a new repository and uploaded all the files from my local folder.
It looks good to me.
There may be problems in the future. I guess I'll cross that bridge when (if) I come to it.
An alternative approach is to switch to command line and:
delete the .git folder in your repository
recreate it (git init .)
reset the origin remote: git remote add origin https://github.com//
Make a first commit with your current content:
git add .
git commit -m "first commit"
overwrite everything on the remote repo
git push --force -u origin master
The end result will be the same repo but with only one commit.
You can then switch back to GitHub Desktop.
From here.
First make sure you have Git for Windows installed, you are going to need to do git commands manually sooner or later.
Go to your local repository on your computer where your project is located. It's a good idea to show hidden files so you can see that you have the .git-folder and that the .gitignore-file is in place.
Go to the folder where the .git-folder is, right-click and click git bash here.
Now enter these commands:
Create Orphan Branch – Create a new orphan branch in git repository. The newly created branch will not show in ‘git branch’ command.
git checkout --orphan temp_branch
Add Files to Branch – Now add all files to newly created branch and commit them using following commands. Don't forget .gitignore!
git add .
git commit -m "the first commit"
Delete master Branch – Now you can delete the master branch from your git repository.
git branch -D master
Rename Current Branch – After deleting the master branch, let’s rename newly created branch name to master.
git branch -m master
Push Changes – You have completed the changes to your local git repository. Finally, push your changes to the remote (Github) repository forcefully.
git push -f origin master
Git overview
I was committing and pushing in ordinary for my repository.
but once i used command of git checkout for change to the previous version of my repository.
after that i tried to commit and push, then it can not completed.
i try to use the --no-verify command to push the commit but it also not success.
error: failed to push some refs to 'https://github.com/ruwanliyanage123/Hair-4-U-Hospital.git'
i want to push my commit into github repository
Since you switched to a previous version of your repository, your head is most probably detached. You can't just go back anywhere in your history and make commits.
Consider making a branch from there and then commit to it.
Try to first check in which branch you are working do git branch, check is the one you are working. Then I sometimes do git pull to just make sure that the connection is working this should not delete your progress the you should be able to do git push. If you are afraid youll mess up first do a local back up of all project files except for the .git one which are hidden by default in windows.Lastly I would suggest never posting the actual link to your github repository in case whatever you are working is important, you can just replace with
https://github.com/user/projectname.git
Is it possible to undo one or two faulty commits I have made to Github. I'm not very good at coding either so if there's a way to do it without coding, that would be great.
Thank you very much
You can do this via doing the following command in your local workspace:
git reset --merge <hash>
Where <hash> is the commit prior to the commits that you want to revert.
The above command is enough if you haven't pushed to GitHub. If you have pushed to GitHub, you then run the following to force an update of the remote branch:
git push --force origin <branch>
(Note: This is assuming that your remote is named origin, but rename as appropriate.)
Note that this re-writes history on the remote branch, and is not recommended if other developers are using the same branch. If you know who the developers are, you can communicate with them to delete their local copies of the modified branch and ask them to run git fetch to get a new copy of the branch.
I want to clone POX Controller from Github repository into my laptop. The only way I know is by cloning. However, I think if someone clone a project, he/she won't get the updates that the others have done in it. I have read about forking but I don't really understand the difference between fork and clone. So how do I get a project from Github and still be able to receive updates?
Thank you.
To clone a repository means that you will download the whole code of the repository to your laptop.
A fork is a copy of a repository. Forking a repository allows you to freely experiment with changes without affecting the original project.
Most commonly, forks are used to either propose changes to someone else's project or to use someone else's project as a starting point for your own idea. More at Fork A Repo.
as #TimBiegeleisen says, you can get the project and stay updated by clone once then git fetch it periodically.
For example, if you want to cloning POX Controller, clone it:
git clone https://github.com/noxrepo/pox
Then to update it, do the following command on your cloned project:
cd pox // go to your clone project
git fetch
Or you can use git pull instead of git fetch if only need to stay update without keeping your change in the cloned project.
But you must remember the difference between git fetch and git pull. #GregHewgill answers explain it in details:
In the simplest terms, git pull does a git fetch followed by a git merge.
You can do a git fetch at any time to update your remote-tracking branches under refs/remotes/<remote>/. This operation never changes any of your own local branches under refs/heads, and is safe to do without changing your working copy. I have even heard of people running git fetch periodically in a cron job in the background (although I wouldn't recommend doing this).
A git pull is what you would do to bring a local branch up-to-date with its remote version, while also updating your other remote-tracking branches.
Git documentation: git pull
We had a number of developers working on a large website project using Git. We have a GitHub repository and then we have the website on the server, plus all the developers have their local versions.
When we finally launched the project, I got lazy (hangs head in shame) and started making changes directly to the server, without pushing them back to the Github repo. However, other people made changes to the repo, for reasons I don't quite understand, that were never pushed down to the server and are now either outdated or wrong. We have been doing this for almost seven months.
Now the server and repo are hopelessly out of sync. I would now like to get the most updated version of the site (which is the server) back up to the Git repository so we can begin another round of development. I basically want to start with a fresh copy of what is on the server.
How would you recommend I proceed? That was the first time I had used Git. It didn't seem like such a big deal at the time but now seems like it is harder to start up again than I thought.
I have looked for instructions and don't really see anything that fits. Because I am not super confident in my Git skills, I am afraid to just start trying the few ideas I did find and losing what I have on the server.
(I know I could restore from a backup if I really messed it up but would prefer not to do that as it would take the site down.)
Can I uninstall git and start again with a fresh repo? Or is there a safe way to push the current version up to the repo?
Thanks for your help.
UPDATE: I found this answer elsewhere (Replace GitHub repo while preserving issues, wiki, etc) but I am not sure how to do this:
cd into "new" repository
git remote add origin git#github.com:myusername/myrepository (replacing myusername & myrepository accordingly)
git push --force origin master
Possibly delete other remote branches and push new ones.
Not sure what they mean by "new repository"
Make a new branch and push it to GH.
Make a new branch based on the previous
branch.
Switch to the new branch (created on #2).
Delete all the files and folders on this branch repository
except the .git folder and contains
(maintain the README.md,
.gitignore and other files if you want it).
Copy all the files from the server except
.git folder.
Commit.
Switch to local Master (created on #1)
Merge this new branch with the previous one.
Solve conflicts
(I use SmartGITthat have a visual conflict solver and helps me a lot, but you can use gitdiffif you don't want a visual interface)
Commit
Push it to GH.
I hope this helps
I figured this out. What I did was:
Make a new branch on Github to effectively store a backup.
$ git add . to stage all changes
$ git commit -m "Commit message" to commit changes
$ git push --force origin master to force changes from server to remote branch master
Once I did this, there were still hundreds of files I had deleted on the server that were not reflected on the remote github.com repository. I used the following:
$ git rm $(git ls-files --deleted)
See Removing multiple files from a Git repo that have already been deleted from disk
Then repeated git commit and git push. Now my github repo matches my server exactly.
I have not yet deleted the "backup" branch I created on github but I will.
Hope that helps someone.