I have just installed mongodb on my remote ubuntu server for using it with an angular and nodejs project. I created a user using the db.createUser command along with password and roles in the mongo shell.
Then when i try to start the mongodb instance with access control using the command:
mongod --auth --port 27017 --dbpath /var/lib/mongodb
its displaying the error:
IllegalOperation: Attempted to create a lock file on a read-only directory MongoDB
First of all, have you checked the permissions of the folder /var/lib/mongodb (ls -l /var/lib)?
The folder and its contents should be assigned to the mongod user. You could also check the ACL permissions (getfacl), if that's installed in your system.
If permissions seem correct, please continue reading to know how I solved the same error in a different environment.
This happened to me in CentOS 8 after a wrong reinstallation of MongoDB and the data folder /var/lib/mongo had to be created manually. In my case, the problem was that the security context of SELinux (https://www.redhat.com/en/topics/linux/what-is-selinux) had to be updated to give mongod access the folder.
The command below solved my problem (note the path to the data folder in my configuration is slightly different, just update it for your case):
chcon -Rv --type=mongod_var_lib_t /var/lib/mongo
It basically tells SELinux that the context used by MongoDB to access the files should be associated with the target folder.
You can have more information about chcon here: https://www.man7.org/linux/man-pages/man1/chcon.1.html
I've been searching for an answer for a week now and haven't found out how to keep this from happening. I currently have mongo stored from my root directory into a file with path /data/db. The contents of this directory after typing ls...
Contents of /data/db
After I run the command mongod I see this...
After running mongod
I've installed mongodb with homebrew and have followed the installation rules over and over after installing and uninstalling thinking I made a mistake. I'm stuck and am new to mongodb altogether. I've noticed that Homebrew is installed in /usr/local/ and I believe mongo is stored in /data/db/.
I think there is some permission issue. Try changing the group and owner of the directory and the directory where socket file is being created through the command
sudo chown mongo User:mongo User data/socket directory
I have installed MongoDB using manual option.
When I fire mongod it will take parameters from somewhere else specially for dbPath.
I want to have my own dbPath without specifying it with --dbPath each time.
So I found option to provide mongod.conf file and call mongod --config option but still I need to pass path of .conf file.
My ultimate goal is to just launch mongod as service and it will read config file from path I configured. For this I tried LaunchAgent and LaunchDaemon with no luck. What I thought is that if I can configure LaunchAgent or Daemon then I will provide path to mongod of bin directory of MongoDB folder and provide --config and path for .conf file as argument and then I need to just launch mongod using launchctl with name mongod and it will start mongod --config <.conf file path>.
But I am not able to do so. I read nearly 15-16 posts on LaunchAgent and Daemon but did not get solution my problem. I tried to do so with making mongod.plist file at various places like /Library/LaunchDaemon, /Library/LaunchAgent and ~/Library/LaunchDaemon but I always get error "Path had bad ownership/permissions". I tried chown and chgrp but no luck.
I hope you got my point. I really need complete solution to achieve my goal.
Do you use linux or windows?
This is the default location of mongodb.conf in linux:
/etc/mongodb.conf
You can simply edit it with your parameters, and start the service using:
sudo service mongodb restart
If you are using windows, it depends on the version of MongoDB you are using, but check in:
C:\Program Files\MongoDB\Server\3.4\...
For the same file.
Closed. This question needs debugging details. It is not currently accepting answers.
Edit the question to include desired behavior, a specific problem or error, and the shortest code necessary to reproduce the problem. This will help others answer the question.
Closed 2 years ago.
Improve this question
I followed the MongoDb Docs to setup my first MongoDb,
When I start MongoDB using the command
C:\Program Files\MongoDB\Server\3.4\bin\mongod.exe
I get the following error
exception in initAndListen: 29 Data directory C:\data\db\ not found., terminating
shutdown: going to close listening sockets...
shutdown: going to flush diaglog...
now exiting
shutting down with code:100
MongoDB needs a folder to store the database. Create a C:\data\db\ directory:
mkdir C:\data\db
and then start MongoDB:
C:\Program Files\MongoDB\Server\3.4\bin\mongod.exe
Sometimes C:\data\db folder already exists due to previous installation. So if for this reason mongod.exe does not work, you may delete all the contents from C:\data\db folder and execute mongod.exeagain.
For macOS users to fix this issue:
You need to go through the following steps:
Create the “db” directory. This is where the Mongo data files will live. You can create the directory in the default location by running:
sudo mkdir -p /data/db
Make sure that the /data/db directory has the right permissions by running:
sudo chown -R `id -un` /data/db
You're all set now and you can run sudo mongod to start the Mongo server.
It's not working if you run only mongod
Source.
Same issue on my Mac (using Brew) solved using:
sudo mongod
For macOS users take care of below issue:
if you installing MongoDB Community on macOS using .tgz Tarball
((Starting with macOS 10.15 Catalina, Apple restricts access to the MongoDB default data directory of /data/db. On macOS 10.15 Catalina, you must use a different data directory, such as /usr/local/var/mongodb.))
you can solve it as the following:
(MacOS Catalina onwards)
Apple created a new Volume in Catalina for security purposes. If you’re on Catalina, you need to create the /data/db folder in System/Volumes/Data.
Use this command:
sudo mkdir -p /System/Volumes/Data/data/db
Then, use this command to give permissions:
sudo chown -R `id -un` /System/Volumes/Data/data/db
this will replace normal
sudo mkdir -p /data/db
Make sure that the /data/db directory has the right permissions by running:
sudo chown -R `id -un` /data/db
once you finish and start mongoDB you can use the following in terminal:
sudo mongod --dbpath /System/Volumes/Data/data/db
To change default db folder C:\data\db in windows, the command is:
--dbpath
For example:
\mongod --dbpath C:\myfolder
Mac Users
Instead of running MongoDB with:
sudo mongod
You can use mongod instead if you:
Locate the data folder of mongodb (usually ~/data)
Add permission to read + write with sudo chmod -R ugo+rw data
If you need to use sudo when running mongodb (sudo mongod), that means you don't have read and write permission on the mongodb data folder
Please take following steps:
As other friends mentioned, you should make a directory first for your database data to be stored. This folder could be something like:
C:\mongo-data
From command line navigate to where you have installed mongodb and where mongod.exe resides. In my case the full path is:
C:\Program Files\MongoDB\Server\3.4\bin
From here run mongod.exe and pass it the path to the folder you created in step one using the flag --dbpath as follows:
mongod.exe --dbpath "C:\mongo-data"
Please Note: If you are on windows it is necessary to use double-quotes ("") in the above to run properly.
In this way you will get something like the following:
2017-06-14T12:45:59.892+0430 I NETWORK [thread1] waiting for connections on port 27017
If you use single quotes (' ') on windows, you will get:
2017-06-14T01:13:45.965-0700 I CONTROL [initandlisten] shutting down with code:100
Hope it helps to resolve the issue.
To run Mongo DB demon with mongod command, you should have a database directory, probably you need to run:
mkdir C:\data\db
Also, MongoDB need to have a write permissions for that directory or it should be run with superuser permissions, like sudo mongod.
I kept getting the following error when I tried to start mongodb (on mac os).
"shutting down with code:100"
I was using the following command:
./mongod --dbpath=~/mongo-data
The fix for me was that I didn't need the "=" sign and this was causing the error. So I did
./mongod --dbpath ~/mongo-data
Just wanted to throw this out there because the error in no way specifies that this is the problem. I almost removed the contents of the ~/mongo-data directory to see if that helped. Glad I remembered that cli args sometimes do not use the "=" sign.
first you have to create data directory where MongoDB stores data. MongoDB’s default data directory path is the absolute path \data\db on the drive from which you start MongoDB.
if you have install in C:/ drive then you have to create data\db directory. for doing this
run command in cmd
C:\>mkdir data\db
To start MongoDB, run mongod.exe.
"C:\Program Files\MongoDB\Server\4.2\bin\mongod.exe" --dbpath="c:\data\db"
The --dbpath option points to your database directory.
Connect to MongoDB.
"C:\Program Files\MongoDB\Server\4.2\bin\mongo.exe"
to check all work good :
show dbs
1.If it shows error (shutting down
with code 100) that means it is not finding the desired
location of file.
1.a If its before macOS Catalina then create directory with
sudo mkdir -p /data/db and give permissions to use it
sudo chown -R id -un /data/db.
1.b if it macOS Catalina onwards then make
sudo mkdir -p /System/Volumes/data/db and give it
permissions
sudo chown -R id -un /System/Volumes/data/db.
2.Starting mongo db brew services run mongodb-community
3.Type mongod or mongod --dbpath /System/Volumes/Data/data/db
4.And if the mongod show error (shutting down with code 48) that
means the port is being already use so you can do two things
4.a Either you change the port of mongod by specifying port
number
mongod --dbpath /System/Volumes/Data/data/db —port 27018.
4.b Or You can kill the process at that port by finding
the process by
sudo lsof -i :27017
and then kill by command
kill -9
5.Repeat the step 2 and 3.
In MacOS:-
If you forgot to give the path of the previously created database while running the mongo server, the above error will appear.
sudo ./mongod --dbpath ../../mongo-data/
Reference
Note :- ./mongod && ../../mongo-data is relative path.
So you can avoid it by configuration in environment variable
Reference
For windows i've got same issue.
The fix was - i need to run command line as administrator.
if you already have the directory, check the dir permissions or try to restart mongo with sudo.
sudo brew services start mongodb
In my case, I got a similar error and it was happening because I had run mongod with the root user and that had created a log file only accessible by the root. I could fix this by changing the ownership from root to the user you normally run mongod from. The log file was in /var/lib/mongodb/journal/
I you are using Virtualbox check your VM.
docker-machine ssh
df -h
Look at dev/sda1 if you do not have any free space this may be due to a large number of images, or containers. you can remove them using "docker rm" and "docker rmi"
This exit code will also be given if you are changing MongoDB versions and the data directory is incompatible, such as with a downgrade. Move the old directory elsewhere, and create a new directory (as per the instructions given in other answers).
Aravind.
It happened with me too because I stopped the MongoDB by the Task Manager.
Creating the C:\data\db folder and starting the MongoDB at C:\Program Files\MongoDB\Server\3.4\bin\mongod.exe worked for me, as cespon suggested, but the MongoDB didn't show any of my Databases previously created.
Then, removing the C:\data\db folder and repairing the installation with the MongoDB installer, I recovered my data and started normally the MongoDB.
(I'm very new with MongoDB, but it helped me solve this problem and recover may previews data).
typed mongod and getting error
Errors:
exception in initAndListen: NonExistentPath: Data directory /data/db not found.,
terminating
shuts down with Code 100
Then try with (create data and db folder with all permission)
mongod --dbpath=/data
use new tab and type mongo.
>use dbs
If still you are facing prob
then you can check for mac catalina: (https://docs.mongodb.com/manual/tutorial/install-mongodb-on-os-x-tarball/)
for windows: https://docs.mongodb.com/manual/tutorial/install-mongodb-on-windows-unattended/
How can I install mongodb on a Linux server without root privileges? is this possible? What would the steps be? Is there a way to configure mongo to not use /data/db?
You may download the binaries from MongoDB website.
There are a lot of options for the command mongod to change the default behavior, one of these is:
--dbpath arg directory for datafiles
Based on comments:
But it is preferable to specify all configurations in a configuration file and just invoke mongod with:
--config filename