I have installed mongodb on my mac Catalina 10.15. I have php7.3 version installed as well. Now, I want to use the mongoClient() class with PHP. I tried composer require mongodb/mongodb but it says that the mongodb extension is missing :
Using version ^1.5 for mongodb/mongodb
./composer.json has been updated
Loading composer repositories with package information
Updating dependencies (including require-dev)
Your requirements could not be resolved to an installable set of packages.
Problem 1
- mongodb/mongodb 1.5.1 requires ext-mongodb ^1.6 -> the requested PHP extension mongodb is missing from your system.
- mongodb/mongodb 1.5.0 requires ext-mongodb ^1.6 -> the requested PHP extension mongodb is missing from your system.
- Installation request for mongodb/mongodb ^1.5 -> satisfiable by mongodb/mongodb[1.5.0, 1.5.1].
To enable extensions, verify that they are enabled in your .ini files:
- /etc/php.ini
You can also run `php --ini` inside terminal to see which files are used by PHP in CLI mode.
Installation failed, reverting ./composer.json to its original content.
So I tried to install the extension for php using the php doc and I get this error :
pear/install/mongodb/php_phongo.c -fno-common -DPIC -o .libs/php_phongo.o
/private/tmp/pear/install/mongodb/php_phongo.c:22:10: fatal error: 'php.h' file not found
#include <php.h>
^~~~~~~
1 error generated.
make: *** [php_phongo.lo] Error 1
ERROR: `make' failed
Any help ?
I also had the same issue after upgrading to MacOS Catalina
Run these two commands;
brew doctor
brew link --overwrite php
I fixed that by installing PHP7.3 using homebrew
here is a post that helped Install PHP 7.3 + xdebug on MacOS Catalina (with homebrew)
I also updated the macos to 10.15 catalina and started the setup. As same as error came during installing the mongodb driver
After Resolving my issue I updated the answer by given below steps:
Step 1:
Run the command: brew install php71
Step 2:
Edit httpd.conf under directory of /etc/apache2/httpd.conf
Add below line
LoadModule php7_module /usr/local/opt/php#7.1/lib/httpd/modules/libphp7.so
then check there should be no other php7_module enabled.
Also add these lines
<FilesMatch \.php$>
SetHandler application/x-httpd-php
</FilesMatch>
Step 3: Restart apache: sudo apachectl restart
Step 4:
If you need to have php#7.1 first in your PATH run:
echo 'export PATH="/usr/local/opt/php#7.1/bin:$PATH"' >> ~/.bash_profile
echo 'export PATH="/usr/local/opt/php#7.1/sbin:$PATH"' >> ~/.bash_profile
For compilers to find php#7.1 you may need to set:
export LDFLAGS="-L/usr/local/opt/php#7.1/lib"
export CPPFLAGS="-I/usr/local/opt/php#7.1/include"
Step 5:
To have launched start php#7.1 now and restart at login:
brew services start php#7.1
Step 6:
Open new terminal & check php version & it should be 7.1
Step 7:
Then run the command: sudo pecl install MongoDB
& it will install php mongodb driver successfully without any error.
Make sure all step should be followed!!
I did these steps to resolve my MongoDB driver issue for laravel project which not found.
I'm working on an Ubuntu 16 server and I can't seem to get the mongodb driver for php 7 to work. I installed it successfully on my xampp on my windows machine but Ubuntu and php7 seemingly have vast differences.
I did try to install it via pecl install mongodb and used composer to put in the dependencies but it still does not work. I'm using the same php file from my windows Xampp and when I access the page it throws a 500 status code.
Could someone provide a definitive walkthrough on how to install this driver and maybe also how to revert any changes I made using composer and pecl?
Cool even I tried with pecl but didn't work as expected. It work with pecl7 Also, I received this warning along with error, WARNING: "pecl/mongo" is deprecated in favor of "channel:///mongodb" pecl/mongo requires PHP (version >= 5.3.0, version <= 5.99.99), installed version is 7.1.8. Also, got 500 Internal server error.
Before that MongoDB php7 driver, I needed the memcache and getting phphize error that I solved using this repo. Then finally I use this low level PHP driver for MongoDB.
$ git clone https://github.com/mongodb/mongo-php-driver.git
$ cd mongo-php-driver
$ git submodule sync && git submodule update --init
$ /usr/bin/phpize
$ ./configure
$ make all -j 5
$ sudo make install
You can confirm from the output that mongodb.so driver is installed.
;;;;;;;;;;;;;;;;;;;
; Module Settings ;
;;;;;;;;;;;;;;;;;;;
extension=mongodb.so
Then only step remaining is make it available in your respective path. You can check your extensions_dir in php.ini with the following command,
$ php -i | grep extension_dir
extension_dir => /usr/lib64/php/7.0/modules => /usr/lib64/php/7.0/modules
And, I can verify that mongodb.so is present into the above directory. Then reload the composer and you are good to go ! Hope this helps as it work for me.
I am not able to install the php mongo driver in a VPS. I've followed this and this documentantion
I checked this stack here but i can't figure out what I am doing wrong.
The VPS runs on PLESK 12 and CentOS 7.
lets say that I have the domain "mydomain.com" on my plesk and in mydomain.com/info.php a phpinfo script.
PHP INFO
PHP.ini
What amb I doing wrong?
The weird thing is that when I run the command "php -v" I get this output:
Which is not the version that is showing phpInfo.
Finally, I can't install the newest driver versions using pecl because I get the following error:
I would appreciate any help
Thanks!!
It's happens because you are call native OS binaries of php and pecl.
Plesk's PHP 5.6 binaries are stored in /opt/plesk/php/5.6/bin/. So you have to call /opt/plesk/php/5.6/bin/php and /opt/plesk/php/5.6/bin/pecl
Here full steps how to install mongodb for PHP 5.6:
[root#cos71x64-plesk12 ~]# /opt/plesk/php/5.6/bin/pecl install mongodb
/opt/plesk/php/5.6/bin/phpize not found. Run 'yum install plesk-php56-devel' to install it
[root#cos71x64-plesk12 ~]# yum install plesk-php56-devel
[root#cos71x64-plesk12 ~]# /opt/plesk/php/5.6/bin/pecl install mongodb
Build process completed successfully
Installing '/opt/plesk/php/5.6/lib64/php/modules/mongodb.so'
install ok: channel://pecl.php.net/mongodb-1.1.4
configuration option "php_ini" is not set to php.ini location
You should add "extension=mongodb.so" to php.ini
[root#cos71x64-plesk12 ~]# echo "extension=mongodb.so" > /opt/plesk/php/5.6/etc/php.d/mongodb.ini
[root#cos71x64-plesk12 ~]# /opt/plesk/php/5.6/bin/php --info | grep mongo
/opt/plesk/php/5.6/etc/php.d/mongodb.ini,
mongodb
mongodb support => enabled
mongodb version => 1.1.4
mongodb stability => stable
libmongoc version => 1.3.3
mongodb.debug => no value => no value
Overview
I was creating my Docker image to setup Rockmongo.
In the Dockerfile, I have a command
pecl install mongo
This command was working before but when ran t today I am getting this error,
downloading mongo-1.5.5.tgz ...
Starting to download mongo-1.5.5.tgz (Unknown size)
....done: 3,582 bytes
Could not get contents of package "/build/buildd/php5-5.3.10/pear-build-download/mongo-1.5.5.tgz". Invalid tgz file.
Download of "pecl/mongo" succeeded, but it is not a valid package archive
Error: cannot download "pecl/mongo"
Reference
To view the whole docker file
https://github.com/gilacode/docker-rockmongo/blob/master/Dockerfile
Question
Is there any way to specificy a different version of the Mongo package during the "pecl install command"?
I see this is an old question but anyway ...
I had the same issue and it was not due to the pecl website.
It seems to be a bug with the "lfs" option when you compile php5.
To verify if this is your case type: php-config --phpapi
I got it working by adding the --nocompress option
[sudo pecl install --nocompress mongo]
You can see other details here https://bugs.php.net/bug.php?id=67075
I'm trying to install the rackspace plugin for vagrant (1.5.1):
vagrant plugin install vagrant-rackspace
But it complains
Bundler, the underlying system Vagrant uses to install plugins,
reported an error. The error is shown below. These errors are usually
caused by misconfigured plugin installations or transient network
issues. The error from Bundler is:
An error occurred while installing nokogiri (1.6.1), and Bundler
cannot continue. Make sure that gem install nokogiri -v '1.6.1'
succeeds before bundling.
However gem install nokogiri -v '1.6.1' and /Applications/Vagrant/embedded/bin/gem install nokogiri -v '1.6.1' both work.
I've looked at a bunch of SO threads and blog posts. Things I've tried that have not worked
Running xcode-select --install
Installing full xcode
brew install gcc-4.2
Remove rvm and rvm version of ruby
Install nokogiri w/ built-in (mac) ruby and vagrant-embedded ruby
Despite the fact that nokogiri installs fine (#5 above) without sudo on both counts, vagrant plugin install vagrant-rackspace still fails...
So, in summary, I can install the nokogiri plugin, however I cannot install the vagrant rackspace plugin, can you help me get the plugin installed?
Related threads
Error to install Nokogiri on OSX 10.9 Maverick?
nokogiri - ERROR: Failed to build gem native extension
Full output of vagrant plugin install vagrant-rackspace --debug
I'm on OSX Mavericks and this worked for me:
Set as environment property:
NOKOGIRI_USE_SYSTEM_LIBRARIES=1
Then install as usual:
vagrant plugin install vagrant-rackspace
Vagrant ships with embedded Ruby and isolated gem environment. So installing gems manually to your "normal" gem environment won't help.
The first issue is that you should never use sudo to run any vagrant command. If possible, please remove ~/.vagrant.d/ or at least chown it recursively back to your own user. You could also try upgrading Vagrant to v1.5.1.
Then please gist/pastebin the output of vagrant plugin install vagrant-rackspace --debug and ~/.vagrant.d/gems/gems/nokogiri-1.6.1/ext/nokogiri/mkmf.log.
The posted solutions didn't work for me. Instead I needed to specify the libxml2, libxslt and libiconv that I installed with homebrew (Do this first).
I installed the gem manually with the embedded ruby with the following [very concise] command line:
/Applications/Vagrant/embedded/bin/gem install \ # select the embedded ruby
--install-dir ~/.vagrant.d/gems \ # install to the vagrant dir
nokogiri -v '1.6.2.1' -- \ # pass options to nokogiri install
--with-xml2-include=/usr/local/Cellar/libxml2/2.7.8/include/libxml2 \
--with-xml2-lib=/usr/local/Cellar/libxml2/2.7.8/lib \
--with-xslt-dir=/usr/local/Cellar/libxslt/1.1.26 \
--with-iconv-include=/usr/local/Cellar/libiconv/1.13.1/include \
--with-iconv-lib=/usr/local/Cellar/libiconv/1.13.1/lib
This worked for me on Mavericks and Vagrant 1.6.1:
CC=/usr/bin/gcc vagrant plugin install vagrant-rackspace
I tried NOKOGIRI_USE_SYSTEM_LIBRARIES=1 but got an error saying that system libxml2 is too old.
Warning: This is a super-hacky solution, though it's hard to call it that.
Yesterday I installed Vagrant on another OSX Mavericks box. Like many other posts I read on SO "all I had to do" was run xcode-select --install and bingo vagrant plugin install vagrant-rackspace worked like a charm.
Today I was mired down in the Bundler code again when it dawned on me that since this is an isolated ruby environment why not nuke my ~/.vagrant.d directory and copy the same directory from the successful build on the other box...
The result? A working vagrant rackspace on my laptop! I'm not sure I'll ever figure out what was really wrong, but if anyone wants a shot at the 100 point bounty, I'm still open to suggestions!
In my case the nokogiri folders and their files located in ~/vagrant.d/gems/gems had wrong rights (user/group).
After changing them to username:staff (username being your console user name), it works like a charm.
Similarly with my case, I have an issue while installing vagrant-omnibus plugin for Vagrant 1.6.3 on OSX Mavericks 10.9.4 and ruby 2.0.0p247 rbenv.
I tried setting the env NOKOGIRI_USE_SYSTEM_LIBRARIES to 1 or true, then update+install but the same error still there.
I found that there is a suggestion in https://github.com/mitchellh/vagrant/issues/3769 to use the specify the baked in nokogiri version and this works for me. So, I also wrote a quick noted for myself to refer this unfortunates issue.
If Nate Murray's solution doesn't work, I found upgrading to a Vagrant version > 1.6.4 fixed the issue (as noted in this Github issue: https://github.com/mitchellh/vagrant/issues/3769)
in my case while trying to install vagrant-parallels, i had to check the Command line tools folder had an error in the naming for some reason. Fixing that allowed nokigiri to work well