I am guessing that I should not edit the .zcompdump file, because it may be overridden. Is this correct? but what is the recommended mechanism to extend it? let's say I simply want my latex command, called mylatex, which should only be run on .tex files. in .zcompdump, I see
'pdflatex' '_tex'
presumably, I should not just add a line
'mylatex' '_tex'
how is this done?
Is there a method to store the command line outputs to a file in Julia.
The command history can be seen at .julia\logs\repl_history.jl in Windows OS.
I wish to store command line output also to a file automatically.
? command outputs also.
Whatever is shown in the julia command line, the whole text should be stored into a file.
Is there a way to do this.
found a similar qn : For Julia saving output to txt/CSV file?
If you run Julia in REPL mode in Widows using PowerShell, you can do the following in PowerShell:
Open the left upper corner menu and in Defaults, change the buffer size to something large enough for your needs, say 500.
After running Julia to do what you need, go the the left hand corner menu and choose Edit - Select all, then Copy. Paste to an editor.
I'm looking for a solution to copy the command prompt's current content to the clipboard. I know something similar is possible by redirecting the output or using clip but I'm looking for something else. I'm looking for a command which copies the entire content of the command prompt window to the clipboard/a file anytime when it's called(not just the output of one command). It's quite easy to do manually by selecting everything and press ctrl-c but I need a command for this.
Basically it should achieve the same as doskey /history > somefile.txt but saving the output of the commands too.
Is something like this possible?
you can use simple java program , to get the entire content of the command prompt and out it into a String variable or write it to txt file
I use the plugin SimpleSession with Sublime Text 3 (but any plugin could be considered). If I save a session with multiple windows, this creates a .simplesession file. How can I open that session file just by clicking on the file? The goal is to avoid having to launch ST3 and use the Command Palette to run the "Load Session" command. Currently, clicking on the .simplesession file causes ST3 to open it as a regular file.
Sublime doesn't know that a simplesession file is important in any way, so double clicking on one is going to open it the same as Sublime would open any other file.
Since it's a plugin that created the file, that plugin is the only thing that knows that it's special and what to do with it. So what you really need is the way to tell the plugin to take the action for you.
All actions in Sublime (including things as simple as inserting text) are taken by executing a command. Here that would be a command in the plugin that created the file in question, which would tell it that you want to carry out the action you would normally take manually, such as loading a session.
To do that from within Sublime you'd do something like bind a keyboard key to the appropriate command, add it to a menu, the command palette, etc. If you want to take the action from outside of Sublime, then you need to communicate that command to Sublime in order to get it to execute.
In core Sublime you can do this by executing the subl program that ships with Sublime and tell it a plugin command that you would like to execute.
Although it's possible to do this, the solution provided here has the requirement that Sublime already be running due to technical limitations within Sublime itself, but more on that in a moment.
This answer will give you the information that you need to formulate the command line that you need to execute in order to get the plugin command to run and carry out the action that you desire.
If you want to run this command in response to double clicking a file of a particular type (here a simplesession file), how you do that is specific to the operating system and file browser that you're using, and is best asked as a separate question.
Assuming you instead want a level of integration where you just have a desktop shortcut, start menu entry, etc that does this, this is more straight forward because such a shortcut is really just a visual wrapper that executes a command of your choosing.
Again, how you would do that is different depending on your OS, but the important part is knowing what full command line you need to give to the shortcut to be able to run it, which is what this answer tells you how to construct.
Important Note: The specific package in your question implements a load_session command, which prompts you for the session to load from a list of sessions you've previously created.
This command doesn't take any argument that would tell it what session to load without asking you to pick one first. As a result, what you want isn't technically possible without more work because there's no way to directly tell the load_session command the file that you want to open.
In order to more fully automate things in this particular case, the underlying package needs to be modified. In particular either the load_session command would need an optional argument which, when given, would cause it to load that session without prompting first, or
a new command would need to be created to do the same thing.
If you're not comfortable or knowledgeable enough to make such modifications to the package directly, you need to either find someone that will do that for you or (even better) discuss it with the package author, since that is a feature that others would probably enjoy as well.
The first thing you need to know is, "What command in the plugin is the one that I need to execute to do what I want?". In some cases you may already know exactly what command you need to use because it's documented, or you have already made a custom key binding for it, and so on.
If you don't know the command you need to use, check the documentation on the package (if any) to see if it mentions them. In your particular case, the README on the package page specifically mentions a list of commands, of which load_session seems like the most appropriate fit.
Lacking any documentation, the next easiest thing to do would be to ask Sublime directly. To do this, select View > Show Console from the menu or press the keyboard shortcut associated with it, Ctrl+`. In the console that appears, enter the following command and press enter.
sublime.log_commands(True)
Now whenever you do anything, this console is going to show you exactly what command Sublime is executing, along with any arguments that it may be passing to the command. This remains in effect until you use the same command with False or restart Sublime.
With logging turned on, select the appropriate command from the command palette and see what the Console says.
For example, with this package installed, I get output like the following:
>>> sublime.log_commands(True)
command: show_overlay {"overlay": "command_palette"}
command: load_session
This is showing two commands; first I opened the command palette which uses the show_overlay command, and then I selected the SimpleSession: Load command, which is the load_session command with no arguments.
In order to get Sublime to execute the command from the command line, you use the --command command line argument to subl. So in order to get Sublime to run the load_session command, you can enter the following command in a command prompt/terminal in your OS. This is also the command you would set in your desktop shortcut.
subl --command "load_session"
This presumes that you've set up Sublime so that it's in the path (how you do that is OS specific). If running subl in a terminal gives you an error about a missing command, either add the Sublime install directory to the path or use a fully qualified file name in place of subl (e,g. "C:\Program Files\Sublime Text 3\subl" if you're on Windows); either requires you to know what location Sublime is installed in.
If you want to use a command that takes arguments you need to include the arguments in the command as well, in the same way as they were displayed in the console above.
It's important that the command name and the arguments all be considered one command line argument, which requires you to wrap the whole thing in quote characters, since otherwise the spaces will make it appear as multiple arguments.
If you forget this, Sublime will respond by opening files named after the different parts of the command and arguments that you tried to open under the mistaken belief that you're giving it files to open.
As a concrete example, to get Sublime to open the command palette from outside of Sublime, the command to do this would look like the following if you were on Linux/MacOS:
subl --command 'show_overlay {"overlay": "command_palette"}'
Note again that we are passing exactly what the console showed above, but the whole thing, command and arguments, are wrapped in single quotes so that the terminal knows that the entire value is one argument.
This makes things a little tricky on Windows, which doesn't allow single quotes. On that platform you need to use double quotes instead. This requires you to "quote" the internal double quotes with a leading \ character so that the command processor knows that they're part of the argument and not the double quote that ends the argument.
For the case of opening the command palette on Windows, the command thus looks like this:
subl --command "show_overlay {\"overlay\": \"command_palette\"}"
With this information in hand, you can set up something like a desktop shortcut to run the appropriate command, or potentially set up the file explorer that you're using to execute a command specifically when you double click on a file of your choosing.
Again, how you would do that is specific to the operating system that you're using, and so I'm not really covering that in depth here in this answer. Just keep in mind that regardless of the OS in question, the part that remains the same is that you need to use subl command like the above.
Now, in your particular case, if the package that you're using provided a command that would let it load the session directly without prompting you first, the command that you use would need to also include the name of the session file as one of the command arguments.
However, as I mentioned above, this package doesn't currently allow that at the moment.
Now, here is the GIANT CAVEAT with this whole thing; this only works if Sublime is already running.
The subl command talks to an existing running copy of Sublime and gives it commands to open a file, directory, run a command as we're doing here, and so on. If Sublime isn't already running, then subl will start Sublime first and then communicate these details to it.
Sublime starts and makes it's interface available to you to work right away, and then starts to load packages and plugins in the background. This is to get you in and working on your files without having to wait for all packages to load first.
An issue with this is that as soon as Sublime starts, subl passes off the appropriate commands and then quits, and since packages aren't loaded yet, the command that you want to execute doesn't exist yet (hasn't been loaded), so nothing actually happens.
Unfortunately there's not really a satisfactory way around this particular issue if you want to start Sublime and also execute commands.
A potential workaround would be use something like a script or batch file that would check to see if Sublime is already running, and if not Start it and delay a little bit to allow plugins to finish loading, then use subl to run the command.
However this would require you to basically guess how long it takes Sublime to finish loading, which is less than ideal.
I know subl myfile.txt:5 would open “myfile.txt” on line 5. I however want to be able to, from the command line, open a file with say lines 5,9,15 highlighted or selected. I know adding –command should enable me to do that, but how? What would the command be?
There's no built-in command that I know of that can do this, but one can easily create one.
(Technically, it could be done using the bookmarks functionality from the Default package, and the built-in "Expand Selection to Line" functionality. However, experience shows that it would be better and more reliable to write a command in ST specifically for this purpose.)
In ST:
from the Tools menu -> Developer -> New Plugin...
select all and replace with the following
import sublime
import sublime_plugin
class SelectSpecificLinesCommand(sublime_plugin.TextCommand):
def run(self, edit, lines):
self.view.sel().clear()
for line in lines:
position = self.view.text_point(int(line) - 1, 0) # internally, line numbers start from 0
self.view.sel().add(self.view.line(position))
save it, in the folder ST recommends (Packages/User/) as something like select_lines.py (file extension is important).
subl myfile.txt
subl --command "select_specific_lines { \"lines\": [5, 9, 15] }" (this style of escaping the quotes for JSON strings works from the Windows Command Prompt and Linux's Bash)
Why did I specify the command on a separate line / call to subl? Because of these 2 caveats:
ST must already be running, otherwise commands specified on the command line may not get executed, because the plugins haven't loaded yet.
the command could get executed before the file is loaded.
Arguably, point 2 could still happen with multiple invocations of subl, but hopefully it is less likely. There is an open issue on the ST bug tracker for better command line command handling: https://github.com/SublimeTextIssues/Core/issues/1457.