I recently upgraded to Windows 8, and now I can't seem to get Fiddler to inspect my localhost requests.
I have followed the instructions for Windows 8 and set the loopback exemptions and installed the certificate.
I am now trying to use a filter for "Show only the following hosts".
If I leave the dropdown set to - No Host Filter -, I can see my localhost requests just fine in Fiddler.
However, if I change that to "Show only the following hosts" and add localhost/mywebapp, then click the "Changes not yet saved" to apply, none of my requests show up.
If I add an external website (eg www.mywebapp.com) as a filtered item, I can see that just fine as well. It appears to only be localhost items that I can't filter for.
Any ideas what I'm doing wrong?
Note: I'm using Chrome and Firefox and neither work.
Turns out the "Capture Traffic" flag was off, which is really strange because why was it capturing traffic without the filter set to on??
Anyways, it's working now.
That's because localhost/mywebapp isn't a host; localhost is a host. /mywebapp is a path, and if you put it in where a host is expected, it's not going to work.
Related
Following the doc from Rundeck, however the only button I have under "Sources tab" is "ResourceModelSource"
When I click that button I get a blank
PPS Issue happened on previous version - new to RunDeck, so I can't say that it EVER worked
I tried adding a manual resouces.xml in the project director y(Which I had to manually create, which tells me that's another issue) and reloading RD but that did not seem to work
While it's not the likely cause, I'll mention it here incase it IS relevant, I'm hosting on port 4440 however I'm using nginx to forward http (not https) requests on 443 to 4440, this is due to corp net sec policy.
I'm sure it's something where it's having an i/o issue on the local host, however I'm not seeing anything in the logs.
That is a known issue when you have Rundeck installed behind a proxy server, take a look at this: https://github.com/rundeck/rundeck/issues/6278 the solution is to set the grails.ServerURL (rundeck-config.properties file) with the exit URL defined for Rundeck in your proxy server (e.g: grails.serverURL=http://my_domain/rundeck), then restart the Rundeck service.
I created a new cluster in MongoDB Atlas but I can't connect to it thru the mongo shell.
C:\git_symphony\esp8266\SymphonySocket>mongo "mongodb+srv://<clustername>-gy7bf.azure.mongodb.net/test" --username <USERNAME>
DNSHostNotFound: Failed to look up service "":No records found for given DNS query.
try 'mongo --help' for more information
I tried switching regions but it didn't work. I've also tried using Compass on my mac but it just loads indefinitely when I try to connect. What could possibly be wrong?
Turns out, my ISP blocks all connections to MongoDB for some reason. I haven't contacted them yet, but I find this very silly as I racked my brains out trying to solve this when the problem wasn't at all in my control.
I also had this problem with Comcast Xfinity. DHCP sets DNS servers that would not lookup the mongodb connections. I'm running KDE Neon Linux (Ubuntu 18.04). In order to get things working I had to supersede the domain-name-servers supplied through comcast. I used Google's public DNS, but there are others that can be used. I had to edit (you'll need root permissions) the /etc/dhcp/dhclient.conf file, and added to following line:
supersede domain-name-servers 8.8.8.8, 8.8.4.4;
I hope this helps somebody, took me too long to figure it out. :-)
I just found this post by M. Brandao with the fix for Windows users:
Open the Control Panel.
Click View network status and tasks
Click Change adapter settings on the left portion of the window.
Double-click the icon for the Internet connection you're using.
Click the Properties button.
Click and highlight Internet Protocol Version 4 (TCP/IPv4) and click
Properties.
If not already selected, select the Use the following DNS server
addresses option.
Enter the new DNS addresses (see above) and click OK and close out of all otherwindows.
Have you whitelisted your IP address ? IP whitelisting is important otherwise it will not connect.
Have you created this cluster recently and is it in the europe region ?
Is the cluster properly deployed or you are experiencing any issue in the deployment of the cluster ?
Yesterday our extracts failed to refresh with the following message (image extract_error):
Failure: Failed 1 time. Sign in failed.
Resolution Details: Check the Data Connection page for necessary updates to an access token or embedded credentials.
I verified that all our passwords were unchanged and test connections which were successful.
The tableau dashboards now give an error message saying:
HTTP 404:
Unable to connect to the server "localhost". Check that the server is running and that you have access privileges to the requested database. (image tableau_error)
Further, when I opened the Server Status page, I saw that our one of our two Vizql, backgrounder and data servers were down. We have two of each and only one of them is active for all three of them. (image server_status)
So, I decided to remote desktop into the server and run the tabadmin status -v command and strangely it is showing that all processes are running. (image tabadmin_status)
Finally, I opened a case with Tableau Customer Portal and letting them know about this issue (they asked me send them the log.zip file) but the mean time I was trying to problem solve this issue. Any help would be really appreciated.
After trying a lot of things, one process seemed to work.
Stopped the tableau server
Configured it to run 1 Vizql server process instead of 2
Started the server again
Finally, it worked. The status page now shows all the processes are active.
Hopefully, this helps someone who is facing a similar problem.
This may be caused by a firewall issue. Since tabadmin status -v returned all as "running" the cluster is healthy and this is a false alert. The firewall rules could be allowing just the first port and not the entire range (see https://onlinehelp.tableau.com/current/server/en-us/ports.htm) to respond to requests from the application server to build that fancy table with the green and red boxes.
The firewall can be reverted/altered behind the scenes for a number of reasons, usually windows updates or regular group policy synchronization.
Try disabling the windows firewall (https://www.faqforge.com/windows-server-2016/turn-off-firewall-windows-server-2016/), or add an inbound rule allowing access to all ports if your org policy doesn't allow you to actually turn it off. (Follow the steps here, except use "All Local Ports" instead of "Specific Local Ports" https://www.parallels.com/blogs/ras/configuring-windows-server-firewall-for-parallels-ras/)
I had a similar problem and followed these similar steps that Sravee mentioned above to bring the all processes back to active.
Stopped the server
Change the configuration for VizQL server from 2 to 1
Started the server
Enter the licence key (else the server status page will show unlicensed error)
Note: This does not bring the site back but this step is for 'tricking' VizQL server
Stopped the server again
Change the VizQL configuration from 1 to 2 now.
Start the server
Enter the license key
This steps did bring back the server back to active for us. Posting to see if this helps who faces the same problem. Thank you so much.
I use gsutil tool for download archives from Google Storage.
I use next CMD command:
python c:\gsutil\gsutil cp gs://pubsite_prod_rev_XXXXXXXXXXXXX/YYYYY/*.zip C:\Tmp\gs
Everything works fine, but if I try to run that command from corporate proxy, I receive error:
Caught socket error, retrying: [Errno 10051] A socket operation was attempted to an unreachable network
I tried several times to set the proxy settings in .boto file, but all to no avail.
Someone faced with such a problem?
Thanks!
Please see the section "I'm connecting through a proxy server, what do I need to do?" at https://developers.google.com/storage/docs/faq#troubleshooting
Basically, you need to configure the proxy settings in your .boto file, and you need to ensure that your proxy allows traffic to accounts.google.com as well as to *.storage.googleapis.com.
A change was just merged into github yesterday that fixes some of the proxy support. Please try it out, or specifically, overwrite this file with your current copy:
https://github.com/GoogleCloudPlatform/gsutil/blob/master/gslib/util.py
I believe I am having the same problem with the proxy settings being ignored under Linux (Ubuntu 12.04.4 LTS) and gsutils 4.2 (downloaded today).
I've been watching tcpdump on the host to confirm that gsutils is attempting to directly route to Google IPs instead of to my proxy server.
It seems that on the first execution of a simple command like "gsutil -d ls" it will use my proxy settings specified .boto for the first POST and then switch back to attempting to route directly to Google instead of my proxy server.
Then if I CTRL-C and re-run the exact same command, the proxy setting is no longer used at all. This difference in behaviour baffles me. If I wait long enough, I think it will work for the initial request again so this suggests some form on caching taking place. I'm not 100% of this behaviour yet because I haven't been able to predict when it occurs.
I also noticed that it always first tries to connect to 169.254.169.254 on port 80 regardless of proxy settings. A grep shows that it's hardcoded into oauth2_client.py, test_utils.py, layer1.py, and utils.py (under different subdirectories of the gsutils root).
I've tried setting the http_proxy environment variable but it appears that there is code that unsets this.
Hi I am currently writing a Test script for an ecommerce site using Seleneium IDE, this is in a testing environment in HTTP. The issue I am having is the test payment gateway 3D Secure is in HTTPS so when using FireFox the browser displays the security warning message when I am returning from the payment gateway 3D Secure HTTPS to the site testing environment.
'Although this page is encrypted, the information you have entered is to be sent over an unencrypted connection and could easily be read by a third party.
Are you sure you want to continue sending this information?'
I have tried the various commands in the IDE for waitForAlert* and asertAlert* but this javascript alert just seems to over ride any of the commands I use and essentially halts the script until manual intervention is used.
I am unable to turn this particular alert off in FF from what I can assertain from various forums as it is too important to be switched off, I have tried in FF about:config
I can obviusly switch the 3D secure off to allow thee script to run, but I would prefer a complete user scenario to be tested as opposed to a test adapted to suit automation.
Many thanks in advance for your time and assistance.
I had exactly the same problem :
I use Selenium web driver to test against my local http server which sends redirects to https service (3DS as well btw ;). The problem is not with certs, but with this hardcoded warning of switching between https/http.
Based on the link from MacGyver's answer and this answer Key press in (Ctrl+A) Selenium WebDriver, I tested this and I can confirm it closes "Although this page is encrypted, the information you have entered is to be sent over an unencrypted connection and could easily be read by a third party" dialog:
Alert alert = driver.switchTo().alert();
alert.accept();
The other solution, seems to work fine but you'll get UnhandledAlertException with latest Selenium versions (e.g. 2.25.0) :
Actions a = new Actions(driver);
a.sendKeys(Keys.ENTER).perform();
Option #1:
The easiest way is to remove the option in security options for your profile:
http://forums.mozillazine.org/viewtopic.php?f=38&t=665552
Option #2:
Not sure if this applies to an untrusted certifiate or your security warning, but the forum thread seemed to fit. It requires that you use Selenium RC Server.
Profiles are stored here for Firefox: %APPDATA%\Mozilla\Firefox
Profiles can be edited: http://www.dennisplucinik.com/blog/2011/02/04/how-to-install-run-multiple-firefox-versions-in-windows-simultaneously/
Follow the snippet below from this link:
http://old.nabble.com/Security-Warning-on-final-page,-how-to-remove-td22907376.html
If using Firefox 3, see the following post https://developer.mozilla.org/En/Cert_override.txt
The solution I use to get past this security pop-up is only applicable to Firefox 3 browsers and might be more of an hack than a fix but it works.
Run the selenium test
Select "Accept this certificate permanently" when prompted by popup
Click on the OK button (it might be neccessary to have a pause after this because we need to open explorer to find a file now)
Open Windows Explorer and navigate to => "C:\Users\xxxxxxxx\AppData\Local\Temp\customProfileDirxxxx"
This is a temparary profile created by Firefox which contains a file called "cert_override.txt"
Copy "cert_override.txt" to your temp directory
Stop your selenium server.
Open your "selenium-server.jar" file from "c:\selenium-remote-control-xxx\selenium-server-xxx" using WinRar
Drag "cert_override.txt" file into the "selenium-server.jar\customProfileDirCUSTFFCHROME" folder in WinRar (do not delete or edit anything in the .jar file!!!!!)
Close WinRar, start selenium and try it again :)