in emacs, how can I navigate to the beginning or end of some text like this:
test_rejects_requests_when_given_token_is_invalid
In vim I would do capital E if in command mode but I am not sure how to do this in emacs.
Press ctrl-a for move-beginning-of-line, and ctrl-e for move-end-of-line.
Try C-M-left and C-M-right, each of which is backward-sexp and forward-sexp, respectively. If you don't want to use arrow keys, then C-M-b and C-M-f also works.
M-m for back-to-indentation takes you to the first text part of the line. This is useful since most of the time code is indented and you don't want to go to the actual beginning of the line (like C-a). As songyuanyao said, C-e takes you to the end of the line.
Related
In emacs 24, is there a built-in hotkey to destroy a line when the cursor is located at the end of the line without having to move it at the beginning of the line? C-k works only when the cursor is at the beginning of the line.
Ctrl-Shift-backspace removes the whole line, wherever the cursor is.
It does not appear to work in xterm, but works with Gtk front-end.
http://www.gnu.org/software/emacs/manual/html_node/emacs/Killing-by-Lines.html
How can I delete the current line in Emacs?
In addition to C-S-backspace (kill-whole-line) as jamieguinan mentions, you can give kill-line a prefix argument of 0 (i.e., type C-0 C-k) to kill the portion of the line preceding point.
In my Emacs, space key can indent correctly 1 line. If I select several lines, and press space key, the indenting does not work.
By following this link, I try C-M-\ or C-M-q, but C-M deletes directly the whole block selected.
Here is my .emacs, could anyone help?
Select multiply lines, then type C-u 8 C-x Tab, it will indent the region by 8 spaces.
C-u -4 C-x Tab will un-indent by 4 spaces
If you want Emacs to correctly indent multiple lines, then the command is C-META \ also known as C-M-\. In other words, it's not Control - M, but Control - Meta - Backslash (Control + Alt + \ on most keyboards)
[Warning: This approach might lead to errors as mentioned in one of the comments. Iniviting suggestions to fix it.]
Steps to do indentation interactively.
Select the region to be indented.
C-x TAB.
Use arrows (← and →) to indent interactively.
Press Esc three times when you are done with the required indentation.
None of the above method worked for me except Kev's- and that is too verbose for my slow fingers.
For me, I can highlight the region and press Alt-left arrow . Strangely, even though Alt registers as meta in emacs, Esc-left arrow doesn't work.
Another method to indent several lines is just to use the commands to edit several lines: Edit multiple lines at once in Emacs.
Basically, select region and then C-x r t+Tab.
I have 2 columns, separated by comma. How can I swap those columns with Emacs?
I have the following:
column 1,column2
x1,x2
y1,y2
f1,f2
and I want it like this:
column2,column 1
x2,x1
y2,y1
f2,f1
Use M-x query-replace-regexp and then:
\(.+\),\(.+\)
as replace regexp and
\2,\1
for replacement.
In Emacs, you need to escape grouping parentheses with \. So, above regexp would be usually written as
(.+),(.+)
which means that you want everything before comma in first group and everything after comma in second group.
\2,\1
means: write second group, then comma, then first group.
While you can apply techniques given by other people, you can also use the org-mode tables.
Once you convert the data into org-mode table, it is very easy to swap the columns by simple keystrokes. You can have M-x org-mode, select the region then do M-x org-table-convert-region, and then M- on the right most column. I am not sure, how to export the data as CSV, but that should be very easy for you with replace-regexp. This can be helpful: http://www.gnu.org/software/emacs/manual/html_node/org/Tables.html#Tables
Similar to the answer given by #darioo, type the following into the top of your buffer:
(query-replace-regexp "\\(.*?\\),\\(.*\\)" "\\2,\\1")
Then, put your cursor at the end of this line and press ctrl-x, ctrl-e.
You will have an interactive search-and-replace for which you press the space bar to make the change, and press ctrl-g to quit. If you press ! (exclamation mark) then the search will cease being interactive and take place on all matching text.
If you want to reverse the changes then press M-x (usually ESC followed by x) and type undo and press enter.
Emacs has a rectangular selection mode, see for example: http://emacs-fu.blogspot.com/2008/12/working-with-rectangular-selections.html
Even better, if you enable cua-mode, entering Ctrl-Enter will put you in rectangle selection mode that is very easy to use.
http://trey-jackson.blogspot.com/2008/10/emacs-tip-26-cua-mode-specifically.html
Use a macro !
Go to the first line of the buffer
Start recording a macro (F3)
Move to the beginning of the line (^a)
Search for comma (^s ,)
Transpose (M-t)
Move cursor down one line
Stop recording macro (F4)
Select the rest of the lines and:
M-x apply-macro-to-region-lines
UPDATE: This doesn't work properly if you have multiple words in a column. Looking for a more general solution...
I decided that I was ready to try something new, after a few years of using gEdit for most of my coding needs, and try to learn using Emacs. I knew this would be difficult, as I have heard how complex Emacs can be, but I was lured by its power. The hardest thing has been getting used to writing ELisp in the .emacs file to change things about the editor. I can't currently do it myself, but I have found a few helpful snippets here and there to change some options.
One thing I have been having a lot of problems with is getting Emacs to remember the text I have selected after a command. For instance, I commonly highlight a section of code to mass indent it. However, if I do this in Emacs, it will move the selected text only once before unselecting all of the text. Does anyone know a way around this?
Anyway, I apologize for what seems to me to be an easy question, but after an hour of Google searching and looking around here on SO, I thought it was worth asking. I have a few more questions about Emacs, but I will save them and ask separately after I get this straightened out. Thanks!
UPDATE
A few people have asked about what mod I am using and what type of text I am entering. While I don't know much about Emacs modes, I am editing a pure text file at the moment. Something like this:
Hello, I am a simple text file
that is made up of three separate
lines.
If I highlight all three lines and hit TAB, I get this:
Hello, I am a simple text file
that is made up of three separate
lines.
This is great, however, if I use C-x C-x like some suggest below to reselect the text and hit TAB again, I get this:
Hello, I am a simple text file
that is made up of three separate
lines.
I hope this helps!
FWIW, here is the reason for the behaviour of your newly-added example. (I'm not 'solving' the issue here, but I'm posting it to demystify what you're seeing.)
This was determined with emacs -q which disables my customisations, so the following is default behaviour for emacs 23.2.
You are in text-mode. You should see (Text) or similar in the mode line at the bottom of the screen, and C-h m will tell you (under the list of minor modes) "Text mode: Major mode for editing text written for humans to read." Emacs decides (by way of the auto-mode-alist variable) that it should switch to text-mode if you visit a filename matching certain extensions (such as .txt).
In text-mode pressing TAB with a region highlighted causes indent-according-to-mode to be called on each line of the region in sequence. The slightly convoluted path to finding this out starts at C-h k TAB, which tells us that TAB is bound to indent-for-tab-command, which in this instance calls indent-region -- that function name is not stated explicitly in the help, but can be seen in the code -- which checks the buffer-local indent-region-function variable, which is nil, and: "A value of nil means really run indent-according-to-mode on each line."
indent-according-to-mode checks the indent-line-function variable, which has the buffer-local value indent-relative.
Use C-h f indent-relative RET to see the help for this function. (Read this).
Although you probably won't yet have had the experience to know how to check all that (or necessarily even want to!), and fully understand everything it tells you, this is an example of how the self-documenting aspect of Emacs enables a user to figure out what is going on (which then makes it feasible to change things). I essentially just used C-h k (describe-key), C-h f (describe-function), and C-h v (describe-variable) to follow the documentation. Looking at the source code for indent-for-tab-command was as simple as clicking the file name shown as part of its help page.
I suggest doing the following to help see what is happening when indent-relative runs on each line:
M-x set-variable x-stretch-cursor t
M-x set-variable ruler-mode-show-tab-stops t
M-x ruler-mode
Now for each line in turn, put the cursor at the very start of the line and press TAB. You'll end up with all three lines indented to the first tab-stop ('T' in the ruler).
Now repeat this -- again, ensure you are at the very start of each line, in front of the existing indentation.
The first character of the first line (which is currently a tab) is once again indented to the first tab-stop, as there is no preceding line for it to examine.
Next, the first character of the second line is indented to match the position of the first non-white-space character of the preceding line. Because the first character of the second line is also a tab, the actual text of the second line is pushed one tab further along.
The third line follows suit. Its first tab character is lined up with the first non-white-space character of the second line, with the same relative effect as before, giving you the final state in your example.
To emphasise, note what happens if you now put enter the line "a b c" above the existing lines, then move back to the start of the next line (what was previously the first line) and press TAB. The first tab character will now be indented in line with the 'b'. Provided that the indent-tabs-mode variable is true (meaning you have actual tab characters), then this will have no practical effect on the position of the words in the line, as 'indenting' a tab with spaces will not have an effect until the number of spaces exceeds the width of the tab (but that's another kettle of fish entirely!)
All this really means is that text-mode in Emacs doesn't behave the way you'd like it to in this situation. Other major modes can do completely different things when you press TAB, of course.
As is invariably the case with Emacs, things you don't like can be changed or circumvented with elisp. Some searching (especially at the Emacs Wiki) will frequently turn up useful solutions to problems you encounter.
Try typing C-x C-x after Emacs unselects it.
Then, instead of hitting tab (I never knew that tab does what you said! That's totally whacked.), do M-8 C-x C-i. Pity it's so many keys, but it ought to do what you want -- namely, shove everything over 8 columns. Obviously replace the M-8 with something else if you want some other number of columns.
What I usually do is simply type C-x C-x (exchange-point-and-mark) after a command that deactives the region.
How are you indenting, and in which mode?
The indentation rules in any programming mode should generally just get it right. (If they don't, that's probably more indicative that you want to configure the rules for that mode differently, but I suspect that's a different question which has been asked already).
If you're in text-mode or similar and just using TAB, then I can see the problem.
Note that if you're using indent-rigidly (C-x C-i, or C-x TAB which is the same thing) then you can repeatedly indent the same region simply by repeating the command, even if the highlighting has disappeared from view.
You can also use a prefix arg to indent-rigidly to make it indent many times. e.g. C-u C-u C-x C-i (easier to type than it looks) will indent 16 spaces (4 x 4, as the prefix arg defaults to 4, and it multiplies on each repeat). Similarly, M-8 C-x C-i indents 8 spaces. This is fine in some circumstances, and way too cumbersome in others.
Personally I suggest putting (cua-selection-mode 1) into your .emacs and using that for rigid indentation. Trey Jackson made a handy blog about it. With this, you can C-RET to start rectangle selection, down as many lines as you need, TAB repeatedly to indent the lines, and C-RET to exit the mode.
While the rectangle is active, RET cycles through the corners. For left-hand corners, typing inserts in front. For right-hand corners, typing inserts after. For the single-column rectangle, bottom counts as 'left' and top counts as 'right' for this purpose.
Trey's blog lists all the available features (or look in the source file: cua-base.el)
Be warned that indentation in Emacs is generally an unexpectedly complicated topic.
You can do this with something like the following:
(add-hook 'text-mode-hook (lambda ()
(set (make-local-variable 'indent-region-function)
(lambda (s e)
(indent-rigidly s e tab-width)))))
Then selecting a region and hitting TAB. will indent the region by a tab-width. You can then exchange point and mark with C-x C-x and hit TAB again to repeat.
I do, however, agree with the previous answers that suggest using indent-rigidly directly.
If I have a multiline sentence in Emacs it naturally overflows onto the the following lines. Now, if my cursor is at the beginning of such a sentence and I press the DOWN ARROW key, the cursor is placed at the beginning of the next sentence (which might be at 4-5 lines down), rather than on the next line itself (which other editors do). Same is the behavior of the END and HOME keys.
Is there a way in which I can change this behavior and get the cursor on the next line instead of the next sentence?
I haven't yet tried it myself, but I think what you are asking for is the default behavior for emacs 23. What version are you running?
You might want to check out the page Move By Visible Lines page on the emacswiki.
You might want to try auto-fill-mode or longlines-mode. To get either use M-X then type the command you want. Toggle them off the same way.
If that doesn't work you may want to examine the binding that is being applied to your down arrow. Type C-h k then hit the down arrow key.
It sounds as though the text is wrapping, so by definition (a line being a group of characters separated by a carriage return), it is moving down to the next line.
I agree it is a pain, however a lot of other editors also have this behaviour.
One way is to turn off wrapping:
M-x toggle-truncate-lines
You wont be able to see all of the text in the editor, however it will move down to the next line.