whenever I make a fetch and pull in Sourcetree I get an exeception with the following error:
0 [main] sh 4148 handle_exceptions: Exception: STATUS_ACCESS_VIOLATION
then it "generates" sh.exe.stackdump
I am a newbie to sourcetree but this error keeps recurring. The pull request does not really succeed as it still shows that I have stuff to pull. Any ideas to fix it. Thanks
Okay so the answer to this was: I am using embedded Git in Sourcetree and It turned out it was 'broke' and needed to update it. That solved my problem. Hope it helps someone else.
My sh.exe.stackdump did not leave me alone even after I updated the embedded Git.
What worked for me was to use system git.
Tools -> Options -> Git -> Use System Git
Related
Introduction:
Main Repo: Repo1.
After forking it, my repo is : ForkedRepo1
In Eclipse-Git, I cloned my ForkedRepo1.
Until Thursday, I was able to commit & push without any issue.
Then suddenly, on Thursday, I got the error:
Cannot get remote repository refs
Reason:
ssh://<forkedrepo1: session.connect:
java.netSocketTimeoutException: Read timed out
I have a SSH key.
Nothing as altered in my system, so I am not sure what happened.
To make matters worse, I deleted my Remote(origin) in eclipse-git and when I try to add it back, I get the same error - java.net.SockettimeoutException: Read timed out.
However, via git bash, I can commit a file and push it to the local branch in GitHub.
I hope this info is enough to give me some idea.
FYI: I am working on a existing project, so when I push a file up for review, it worked successfully. It is just that I cannot now do it in eclipse.
Then try, as described here, to switch to an HTTPs URL.
You can then cache your GitHub credentials (GitHub username/password) in a credential helper, generally already configured (see git config credential.helper)
It is probably caused by the removal of weak cryptographic standards.
You need a recent Java 8 revision (i.e. 1.8.0_161), a recent version of EGit (such as 4.10.0.201712302008-r) and you probably need also to restart (just once) Eclipse with the -clean parameter.
I'm using Zend Studio 9.0.3 and I have a repository on github. I created a project from github on my local machine. I can commit things, but once I try to push to upstream, I get the following error:
Can't connect to any repository: https://github.com/xxxxx/xxxxx.git (An internal Exception occurred during push: https://github.com/xxxxx/xxxxx.git: insufficient data written)
Am I missing something?
Thanks in advance for any info!
(nb: replaced the actual url with xxxx - don't want anyone sniffing in it while it's in development =] )
edit:
I don't get that error anymore, but now Zend Studio thinks the master/origin repository is already up-to-date, while there are several commits waiting to be pushed.
I had simillar errors while creating two (or more) branches of code, then merging them, commit, and push. I guess this is caused by some bugs in git algorithm.
Solved the issue.
Steps I took to fix this:
Open Preferences -> General -> Network -> generate new SSH (RSA) key
Go to github, add the key to your keys
Removed the default revs settings that Zend studio made
Pushed to origin/master.
Success \o/
[SOLVED] Somehow, I managed to not have "write" permissions to the .git directory. So was trying to write the commit and getting bounced.
I've been using Eclipse for a few months, but had been just running git from the CLI. I decided that was inefficient and that I wanted to use eGit, so I started following this tutorial (http://www.slideshare.net/loianeg/using-the-egit-eclipse-plugin-with-git-hub-2578587?from=embed).
I'm trying to add an existing project, so I did Team-->Share Project-->Git and selected the .git corresponding to my project. Eclipse seems to have picked it up, okay, but when I try to commit, I get a popup saying
"Committing changes has encountered a problem' -- an internal error occured.
When I click details, it say "An internal error occurred
Exception caught during execution of commit command"
...I don't even know where to start on this one. I googled the error and didn't get anything useful.
Anyone know how to fix this, or at least how to start debugging?
I've solved my case removing index.lock file from the git folder of the project.
start debugging?
Check the "Errors" Eclipse view for a full Stack Trace associate with that error message
Example of an Error View:
fix it?
If the Exception is a NPE one (NullPointerException), like shown in bug 329611, then you can try a git commit -m "a message" in a shell, in order to get past that initial first commit with a GUI.
As the OP rogueleaderr mentions, the error view and the exact stack trace behind the exception was enough:
Somehow, I managed to not have "write" permissions to the .git directory.
So was trying to write the commit and getting bounced.
I face this problem too, Error tab doesn't show anything more.
So I use GitExtension to commit instead, problem solved.
Using parallel eGit and GitExtension to keep tracking a local git repo is a good idea. It's update runtime on both Eclipse and GitExtension when we make change on each.
I faced this problem. I delete the .git folder and .gitignore file push to upstream it works correctly.
I had this same issue. I resolved it by committing manually from terminal using (in this order):
git add . then git commit and lastly, git push from the local repo directory.
I faced similar problem, It was resolved after deleting index.lock file in .git\ folder.
Hello I am new to Git and trying to setup server part and client part.
On a Server side I have ssh access and Git version 1.5
On a Client side I have eclipse with eGit.
I created git repo on a server side via usual means: git init and added simple html file.
Using eGit I checkout the repo and everything seems to be going well. I made changes on a client side, committed it and decided to push back to the server.
Now I have all permissions set but still get following error:
I don't know how to fix it and error message doesn't provide much details.
Please help.
Thank you!
For me, on Windows eclipse, I had an error like this:
An internal Exception occurred during push: github.com/***/***/service=git-receive-pack not found
I just reconfigured the eclipse and added my github account information and store it. Then it worked. Team->Remove->Configure push to upstream->URI, Change->Add authentication details
Ok, I resolved my issue following way:
1) I changed configuration for remote fetch and pull from sftp to ssh
2) Once I did step 1. I got different error:
When I tried to push changes from Terminal I got following:
git push origin
Password:
bash: git-receive-pack: command not found
fatal: The remote end hung up unexpectedly
3) Found answer to the above error: git-upload-pack: command not found, how to fix this correctly
4) On my old server path to the git is: "/usr/local/git/bin" So I added it to .bashrc file.
Once I done that, everything started to work:
The possible issues are:
1. The source code might not be committed in the first place. Please try committing and see.
2. There is some issue with github authentication. Please re authenticate the credentials and try using: Team->Remove->Configure push to upstream->URI, Change->Add authentication
I recently set up a github account to store the source code of a project I have been working on.
I am using egit eclipse plugin to push changes to github.
I successfully pushed the initial code and 2 subsequent changes. However when I attempted to push the third change I was not able. The following excepiton appears in the eclipse error log.
If someone could tell me the cause of this error, or tell me how I can go about debugging the problem it would be a great help.
org.eclipse.jgit.api.errors.JGitInternalException: Exception caught during execution of push command
at org.eclipse.jgit.api.PushCommand.call(PushCommand.java:156)
at org.eclipse.egit.core.op.PushOperation.run(PushOperation.java:227)
at org.eclipse.egit.ui.internal.push.PushOperationUI.execute(PushOperationUI.java:145)
at org.eclipse.egit.ui.internal.push.PushOperationUI$1.run(PushOperationUI.java:202)
at org.eclipse.core.internal.jobs.Worker.run(Worker.java:54)
Caused by: org.eclipse.jgit.errors.TransportException: ssh://git#github.com/xxx/xxx.git: session is down
at org.eclipse.jgit.transport.JschSession$JschProcess.<init>(JschSession.java:154)
at org.eclipse.jgit.transport.JschSession$JschProcess.<init>(JschSession.java:118)
at org.eclipse.jgit.transport.JschSession.exec(JschSession.java:91)
at org.eclipse.jgit.transport.TransportGitSsh$SshPushConnection.<init>(TransportGitSsh.java:306)
at org.eclipse.jgit.transport.TransportGitSsh.openPush(TransportGitSsh.java:152)
at org.eclipse.jgit.transport.PushProcess.execute(PushProcess.java:130)
at org.eclipse.jgit.transport.Transport.push(Transport.java:1120)
at org.eclipse.jgit.api.PushCommand.call(PushCommand.java:152)
... 4 more
Caused by: com.jcraft.jsch.JSchException: session is down
at com.jcraft.jsch.Session.openChannel(Session.java:750)
at org.eclipse.jgit.transport.JschSession$JschProcess.<init>(JschSession.java:147)
... 11 more
I experienced the same issue. Resolution follows:
Delete origin push and fetch in remote(Eclipse view --> Git repositories).
Close Eclipse.
Go to .ssh folder(Users/.ssh) and delete the key files(public and private).
Start eclipse and regenerate the keys(Window --> Preferences --> General tab --> Network connections --> SSH2).
Copy the key and add it to github/SSH Keys
In Eclipse add new remote and push.
Edit
You may not need to delete all the key files. If you have already added a key file previously (perhaps while setting up native Git), you can just add the name of that file in list of keys, and it will work.
This seemed to work for me:
Do everything Firoz and Nishant say except push: https://stackoverflow.com/a/9889350
Create or edit the following file on your desktop:
File : ~/.ssh/config
Content :
Host github.com
User [your_github_username]
Hostname github.com
PreferredAuthentications publickey
IdentityFile [path_to_private_key]
In your Eclipse Git Setup for your project do the following:
URI : git#github.com:[repo_owner_username]/[repo_name].git
Protocol : ssh
Username : git
Password : [leave_blank]
Save and push.
See this GitHub SSH Help page for useful info: http://help.github.com/ssh-issues/
Worked for me after initially suffering through "session is down" and "cannot open git-upload-pack" errors. Hope it helps everyone else too.
Good luck!
I faced the same problem and I found out solution which is extremely foolish.
I took following steps:
I logged into git repository of my project from browser and didn't sign out.
I copied the http url to push or pull from project repository from github.
I pasted the url in my eclipse plugin while pushing code (didn't use the already stored one even though both of them were same)
I don't know what and why but above steps have worked for me whenever I have faced above problem. I don't know why does eclipse throw such exceptions and why does it gets solved this way.
You can also try pushing using other ways outside of eclipse. for eg. `TortoiseGit` or `SmartGit` etc.
I had the same problem. I fixed it by pointing the JAVA_HOME variable to jdk 6. It was originally pointing to jdk 5.
I got this error message and it was fixed when one of my co-workers emailed me the two files id_rsa and id_rsa (MS Pub doc), I put them in C:Users\[userID]\.ssh, and shut down and restarted my IDE.
I had this issue with EGit and solved it at last. Somehow sometimes things get messed up. If you can not solve it through Eclipse just go to your "git" folder with git bash with Windows. With Linux it is even easier: just open the terminal.
This problem occurs because of username, password, and ssh keys getting messed up.
So, use the commands "git remote show origin" and make sure if the origin is username#github.com...... Sometimes Eclipse just puts "git" as a username so make sure you have the correct user name by changing it with the command git remote set-url origin https://usrname#github.com/restofthe url. It should automatically change the configurations in eclipse.
Best...
I also had this issue.
The following command in Git Bash, comes handy in such scenarios: git remote prune origin
This configured the Pull/Push in the corrupted branch.