I tried to create the Oracle code to update the STATUS = 'Resolved' with left joint of TBL_RPT_CONS_2.ERR_MSG1 = TBL_OPENJOB.ERR_MSG where the ERR_MSG1 on table TBL_RPT_Cons_2 is null.
Update TBL_RPT_CONS_2 Status
Set STATUS = 'Resolved'
FROM TBL_RPT_CONS_2 TBL_RPT_CONS_2
LEFT OUTER JOIN TBL_OPENJOB TBL_OPENJOB
ON (TBL_RPT_CONS_2.ERR_MSG1 = TBL_OPENJOB.ERR_MSG)
WHERE (TBL_OPENJOB.ERR_MSG IS NULL)
AND (TBL_RPT_CONS_2.DOLV_REPORT_NAME = 'ICS1500-4')
AND (TBL_RPT_CONS_2.STATUS = 'Open')
I'm able to view it using select but unable to update it.
SELECT TBL_RPT_CONS_2.STATUS
FROM HRD_DEV.TBL_RPT_CONS_2 TBL_RPT_CONS_2
LEFT OUTER JOIN HRD_DEV.TBL_OPENJOB TBL_OPENJOB
ON (TBL_RPT_CONS_2.ERR_MSG1 = TBL_OPENJOB.ERR_MSG)
WHERE (TBL_OPENJOB.ERR_MSG IS NULL)
AND (TBL_RPT_CONS_2.DOLV_REPORT_NAME = 'ICS1500-4')
AND (TBL_RPT_CONS_2.STATUS = 'Open')
Related
how do you query raw SQL on rails?
So I have this raw sql that I need to run on rails but giving me a syntax error. I also escape the extra parenthesis but still got a syntax error near the first inner join.
here's my code:
Spree::CorporateAccount.joins(" (((((
( inner join spree_memberships on spree_corporate_accounts.id = spree_memberships.corporate_account_id)
inner join spree_users on spree_memberships.user_id = spree_users.id)
left join spree_variant_price_sets on spree_corporate_accounts.variant_price_set_id = spree_variant_price_sets.id)
left join spree_addresses on spree_corporate_accounts.bill_address_id = spree_addresses.id)
left join spree_states on spree_addresses.state_id = spree_states.id)
left join spree_countries on spree_addresses.country_id = spree_countries.id)
left join spree_partner_accounts on spree_corporate_accounts.id = spree_partner_accounts.partnerable_id
").where(" spree_memberships.deleted_at IS null
AND (spree_partner_accounts.partnerable_type = 'Spree::CorporateAccount' OR spree_partner_accounts.partnerable_type IS NULL)
AND admin = true
")
but on sql this is perfectly fine.
SELECT
spree_corporate_accounts.id,
spree_corporate_accounts.company_name,
spree_memberships.ADMIN,
spree_users.email,
spree_users.doctor AS name,
spree_partner_accounts.account_key,
CASE spree_corporate_accounts.billing_type when 1 THEN 'Postbill' WHEN 2 THEN 'Creditcard' ELSE 'Individual'END,
spree_variant_price_sets.name AS priceset,
spree_addresses.address1,
spree_addresses.address2,
spree_addresses.city,
spree_addresses.zipcode,
spree_states.name AS state,
spree_countries.name AS country,
spree_addresses.phone,
spree_users.created_at
from (((((( spree_corporate_accounts inner join spree_memberships on spree_corporate_accounts.id = spree_memberships.corporate_account_id)
inner join spree_users on spree_memberships.user_id = spree_users.id)
left join spree_variant_price_sets on spree_corporate_accounts.variant_price_set_id = spree_variant_price_sets.id)
left join spree_addresses on spree_corporate_accounts.bill_address_id = spree_addresses.id)
left join spree_states on spree_addresses.state_id = spree_states.id)
left join spree_countries on spree_addresses.country_id = spree_countries.id)
left join spree_partner_accounts on spree_corporate_accounts.id = spree_partner_accounts.partnerable_id
where spree_memberships.deleted_at IS null
and (spree_partner_accounts.partnerable_type = 'Spree::CorporateAccount' OR spree_partner_accounts.partnerable_type IS NULL )
AND admin = true
if I do this. It will yield a different result. so what im thinking is the parenthesis evaluate the result first and then go to the next.
Spree::CorporateAccount.joins("inner join spree_memberships on spree_corporate_accounts.id = spree_memberships.corporate_account_id")
.joins("inner join spree_users on spree_memberships.user_id = spree_users.id")
.joins("left join spree_variant_price_sets on spree_corporate_accounts.variant_price_set_id = spree_variant_price_sets.id")
.joins("left join spree_addresses on spree_corporate_accounts.bill_address_id = spree_addresses.id")
.joins("left join spree_states on spree_addresses.state_id = spree_states.id")
.joins("left join spree_countries on spree_addresses.country_id = spree_countries.id")
.joins("left join spree_partner_accounts on spree_corporate_accounts.id = spree_partner_accounts.partnerable_id ")
.where("spree_memberships.deleted_at IS null
AND spree_partner_accounts.partnerable_type = 'Spree::CorporateAccount' OR spree_partner_accounts.partnerable_type IS NULL
AND admin = true
")
Currently I'm getting an incorrect syntax but can't locate its origins. Any thoughts on what i'm missing. Multi-part identifier pvxme.mt couldn't be found.
SELECT
PVXME.MT
PVXME.MT_VERSION
PVXME.START_DATE_LOCAL
PVXMEDS.CREATION_DATE_LOCAL
PVXMIHS.USER_NAME
PVXMEDE.PAT_ID
PVXMEDE.STRING_VALUE
PVXMEDE.NUM_VALUE AS MEDE_NUM_VALUE
RVXMIIF2.II
RVXMIIF2.NUM_VALUE AS MIIF_NUM_VALUE;
FROM
PVXMEDE
RIGHT OUTER JOIN
PVXMEDG ON PVXMEDG.ME = PVXMEDE.ME;
RIGHT OUTER JOIN
PVXMEDG ON PVXMEDG.SEQUENCE = PVXMEDE.SEQUENCE
AND PVXMEDG.SOURCE_TP = PVXMEDE.SOURCE_TP
AND PVXMEDG.SOURCE_ID = PVXMEDE.SOURCE_ID
AND PVXMEDG.SOURCE_VERSION = PVXMEDE.SOURCE_VERSION;
RIGHT OUTER JOIN
PVXMEDS ON PVXMEDS.ME = PVXMEDG.ME
AND PVXMEDS.SEQUENCE=PVXMEDG.SEQUENCE;
RIGHT OUTER JOIN
PVXME ON PVXME.ME = PVXMEDS.ME AND PVXME.MT=;
RIGHT OUTER JOIN
PVXMI ON PVXMI.MI = PVXME.MI;
LEFT OUTER JOIN
PVXMIHS ON PVXMIHS.MI = PVXME.MI;
LEFT OUTER JOIN
PVXMIID ON PVXME.ME = PVXMIID2.ME;
LEFT OUTER JOIN
RVXMIII ON PVXMIID2.MI = RVXMIIF2.MI
AND PVXMIID2.ID = RVXMIIF2.ID
AND PVXMIID2.ID_SEQUENCE = RVXMIIF2.ID_SEQUENCE
AND PVXMIID2.ME = RVXMIIF2.ME;
WHERE
(PVXMIHS.USER_NAME <> 'sipat'
AND PVXMIHS.WHAT = 'MethodPrepare'
AND PVXME.CX_STRING_4 = '20190117-7h40m'
AND PVXME.MT LIKE 'MK-0431%Tab CA%'
AND PVXMEDE.PAT_ID NOT LIKE '%Spectrum')
AND (RVXMIIF2.II = 'LeverageLimit'OR RVXMIIF2.II = 'XresidualLimit')
Try this:
do put a colon after each column in the SELECT list of columns
do NOT put a semicolon at the end of the list of columns and of each JOIN condition
do complete the RIGHT OUTER JOIN that references PVXME.MT = .......
Code:
SELECT
PVXME.MT,
PVXME.MT_VERSION,
PVXME.START_DATE_LOCAL,
PVXMEDS.CREATION_DATE_LOCAL,
PVXMIHS.USER_NAME,
PVXMEDE.PAT_ID,
PVXMEDE.STRING_VALUE,
PVXMEDE.NUM_VALUE AS MEDE_NUM_VALUE,
RVXMIIF2.II,
RVXMIIF2.NUM_VALUE AS MIIF_NUM_VALUE
FROM
PVXMEDE
RIGHT OUTER JOIN
PVXMEDG P1 ON P1.ME = PVXMEDE.ME -- use table alias P1 here
RIGHT OUTER JOIN
PVXMEDG P2 ON P2.SEQUENCE = PVXMEDE.SEQUENCE -- use table alias P2 here
AND P2.SOURCE_TP = PVXMEDE.SOURCE_TP
AND P2.SOURCE_ID = PVXMEDE.SOURCE_ID
AND P2.SOURCE_VERSION = PVXMEDE.SOURCE_VERSION
RIGHT OUTER JOIN
PVXMEDS ON PVXMEDS.ME = P2.ME
AND PVXMEDS.SEQUENCE = P2.SEQUENCE
RIGHT OUTER JOIN
PVXME ON PVXME.ME = PVXMEDS.ME AND PVXME.MT = ?????? -- ** COMPLETE THIS! **
RIGHT OUTER JOIN
PVXMI ON PVXMI.MI = PVXME.MI
LEFT OUTER JOIN
PVXMIHS ON PVXMIHS.MI = PVXME.MI
LEFT OUTER JOIN
PVXMIID ON PVXME.ME = PVXMIID2.ME
LEFT OUTER JOIN
RVXMIII ON PVXMIID2.MI = RVXMIIF2.MI
AND PVXMIID2.ID = RVXMIIF2.ID
AND PVXMIID2.ID_SEQUENCE = RVXMIIF2.ID_SEQUENCE
AND PVXMIID2.ME = RVXMIIF2.ME
WHERE
(PVXMIHS.USER_NAME <> 'sipat'
AND PVXMIHS.WHAT = 'MethodPrepare'
AND PVXME.CX_STRING_4 = '20190117-7h40m'
AND PVXME.MT LIKE 'MK-0431%Tab CA%'
AND PVXMEDE.PAT_ID NOT LIKE '%Spectrum')
AND (RVXMIIF2.II = 'LeverageLimit'OR RVXMIIF2.II = 'XresidualLimit')
how change this query from postgresql into oracle?
SELECT tbmm.tbmm_id,
tbmm.tbmm_email AS seller_mail,
'FB' AS seller_type,
concat(tbmm.tbmm_firstname, COALESCE(tbmm.tbmm_middlename),
COALESCE(tbmm.tbmm_lastname)) AS seller_owner_name,
tbmss.tbmss_name AS seller_store_name,
tbmss.tbmss_description AS seller_description,
tbmss.tbmss_phone AS seller_phone,
btrim(concat(COALESCE(tbmma.tbmma_addr1), COALESCE(tbmma.tbmma_addr2,
tbmma.tbmma_addr1), COALESCE(tbmma.tbmma_addr3, tbmma.tbmma_addr1),
COALESCE(tbmkc.tbmkct_nama), COALESCE(tbmkl.tbmkl_nama),
COALESCE(tbmma.tbmma_postcode, '0') AS seller_store_address,
tbmb.tbmb_name AS bank_name,
concat(tbmb.tbmb_name, COALESCE(tbmsd.tbmsd_bank_account_branch) AS
bank_desc,
tbmsd.tbmsd_bank_account_no AS bank_account_no,
tbmsd.tbmsd_bank_account_name AS bank_account_name,
tbmsd.tbmsd_no_id AS seller_id_card,
'F' AS flag_alfamind,
0 AS commision,
tbmm.tbmm_mage_entity_id,
tbmm.tbmm_update_date AS member_update_date,
tbmss.tbmss_update_date AS store_update_date,
tbmsd.tbmsd_update_date AS document_update_date,
tbmma.tbmma_update_date AS address_update_date
FROM coreapp.tb_master_member tbmm
JOIN coreapp.tb_master_seller_store tbmss ON tbmm.tbmm_id =
tbmss.tbmm_id
JOIN coreapp.tb_master_seller_document tbmsd ON tbmsd.tbmm_id =
tbmm.tbmm_id
JOIN coreapp.tb_master_bank tbmb ON tbmb.tbmb_id = tbmsd.tbmb_id
JOIN coreapp.tb_master_member_group tbmg ON tbmg.tbmm_id = tbmm.tbmm_id
LEFT JOIN coreapp.tb_master_member_address tbmma ON tbmma.tbmm_id =
tbmm.tbmm_id AND tbmma.tbmma_address_type = 140 AND tbmma.tbmma_status = 23
LEFT JOIN coreapp.tb_master_kecamatan tbmkc ON
tbmkc.tbmkct_kecamatan_id = tbmma.tbmkct_kecamatan_id
LEFT JOIN coreapp.tb_master_kelurahan tbmkl ON tbmkl.tbmkl_kelurahan_id
= tbmma.tbmkl_kelurahan_id
WHERE tbmg.tbmg_id = 4;
i have try to query on my sql developer but something error with query
now I'm just try until one day and still can't run
Can I JOIN the table on the basis of the case statement in PostgreSQL. I have written the one SQL in stored procedure into that I'm passing the one flag on that basis I want to jon the table. Please see the case statement,
JOIN lease_intervals li_active
ON ( li_active.cid = l.cid AND l.id = li_active.lease_id AND
l.active_lease_interval_id = li_active.id )
LEFT JOIN applications a
ON ( a.cid = li.cid AND li.lease_id = a.lease_id AND
a.lease_interval_id = li.id )
**CASE
WHEN pIsFromUI = TRUE
THEN JOIN property_integration_databases pid ON ( pid.cid = l.cid AND pid.property_id == l.property_id )
JOIN integration_databases id ON ( id.id = pid.integration_database_id AND id.cid = pid.cid )
ELSE
1
END**
Please let me know is there any alternate solution for above.
join
lease_intervals li_active on
li_active.cid = l.cid and l.id = li_active.lease_id and
l.active_lease_interval_id = li_active.id
left join
applications a on
a.cid = li.cid and li.lease_id = a.lease_id and
a.lease_interval_id = li.id
left join
property_integration_databases pid on
pid.cid = l.cid and pid.property_id = l.property_id and pisfromui
left join
integration_databases id on
id.id = pid.integration_database_id and id.cid = pid.cid and pisfromui
I'm getting error while executing a sql query in Alpha Anywhere Query (AlphaADO) section.
The code i'm executing is attached.
SELECT * FROM
(SELECT
tbl_wo_kitting.wo_kitting_id,
tbl_wo_kitting.level_no,
tbl_wo_kitting.line_no_parent,
tbl_wo_kitting.line_no AS kitting_line_no,
tbl_wo_kitting.production_type,
tbl_wo_kitting.quantity AS kitting_quantity,
tbl_wo_kitting.release_to_wr,
tbl_wo_kitting.mpn,
m_product.m_product_id,
m_product.value,
m_product.name,
m_product.storelocator,
tbl_wo_project.wo_project_id,
tbl_wo_project.line_no AS project_line_no,
tbl_wo_project.quantity AS project_quantity,
m_transaction_moveqty_v.qtyonhand AS qtyonhand,
tbl_work_order.work_order_id,
tbl_work_order.reference_key,
case
when tbl_wo_kitting.level_no, = 'P+'
then '0'
else tbl_wo_kitting.level_no,
end as linenumber,
case
when tbl_wo_kitting.line_no_parent = 'PT+'
then '0'
else tbl_wo_kitting.line_no_parent
end as linenoparent
FROM (tbl_wo_kitting tbl_wo_kitting
INNER JOIN (m_product m_product
INNER JOIN m_transaction_moveqty_v m_transaction_moveqty_v
ON m_product.m_product_id = m_transaction_moveqty_v.m_product_id )
ON tbl_wo_kitting.m_product_id = m_product.m_product_id
INNER JOIN (tbl_wo_project tbl_wo_project
INNER JOIN tbl_work_order tbl_work_order
ON tbl_wo_project.work_order_id = tbl_work_order.work_order_id )
ON tbl_wo_kitting.wo_project_id = tbl_wo_project.wo_project_id )) AS TABLE1
ORDER BY tbl_wo_kitting.level_no, (string_to_array(linenoparent, '.'))::int[],(string_to_array(linenumber, '.'))::int[]
Any idea? This is selecting from PostgreSQL.
Thank you very much in advance.