In a configure file (#!/bin/sh/) generated by autoconf, there is a paragraph inside like the following:
if ac_fn_cxx_try_compile "$LINENO"; then :
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
$as_echo "yes" >&6; }
succeeded=yes
found_system=yes
else
fi
And when I execute ./configure it tells me "syntax error near unexpected token `fi'" at that line. It is not the end of the file.
In line with the comment:
if ac_fn_cxx_try_compile "$LINENO"; then
$as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
$as_echo "yes" >&6;
succeeded=yes
found_system=yes
else
## look nothing here !!
## at least put a ':'
## or delete else altogether
fi
In addition, I have found why autoconf generates such configure file. I copied the configure.ac from Windows and it has ^M as return. Autoconf thinks ^M is something and add it into else...
I ran into this error when compiling libtorrent with minGW.
The problem was a m4 macro saved as a DOS file. Converting "ax_boost_base.m4" to linux file endings did the trick.
I am almost sure I have misconfigured GIT on my windows: It converts all files to DOS which is no good idea.
Related
I am currently executing the configure script of gtk. It tests for the presence of XInput, and it stops the execution with the error message:"configure: error: *** XInput2 extension not found. Check 'config.log' for more details.
Looking at config.log, it says "configure:23050: error: *** XInput2 extension not found. Check 'config.log' for more details."
So, the same except for the line number.
Then I decided to look at configure.ac. There I found the full Xi detection test that it is:
if $PKG_CONFIG --exists "xi" ; then
X_PACKAGES="$X_PACKAGES xi"
GTK_PACKAGES_FOR_X="$GTK_PACKAGES_FOR_X xi"
AC_CHECK_HEADER(X11/extensions/XInput2.h,
have_xinput2=yes
AC_DEFINE(XINPUT_2, 1, [Define to 1 if XInput 2.0 is available]))
gtk_save_LIBS="$LIBS"
LIBS="$LIBS -lXi"
# Note that we also check that the XIScrollClassInfo struct is defined,
# because at least Ubuntu Oneiric seems to have XIAllowTouchEvents(), but not the XIScrollClassInfo struct.
AC_CHECK_FUNC([XIAllowTouchEvents],
[AC_CHECK_MEMBER([XIScrollClassInfo.number],
have_xinput2_2=yes
AC_DEFINE(XINPUT_2_2, 1, [Define to 1 if XInput 2.2 is available]),
have_xinput2_2=no,
[[#include <X11/extensions/XInput2.h>]])])
LIBS="$gtk_save_LIBS"
if test "x$have_xinput2_2" = "xyes"; then
X_EXTENSIONS="$X_EXTENSIONS XI2.2"
else
X_EXTENSIONS="$X_EXTENSIONS XI2"
fi
fi
AS_IF([test "x$have_xinput2" != "xyes"],
[AC_MSG_ERROR([*** XInput2 extension not found. Check 'config.log' for more details.])])
I am no expert about setting configure.ac, but I thought that this line: "if $PKG_CONFIG --exists "xi" ; then" would be satisfied by this parameter that I pass to configure:
PKG_CONFIG_PATH=:/media/34GB/Arquivos-de-Programas-Linux/xorg/Xi-1.5.0/lib/pkgconfig/
Also this line:
AC_CHECK_HEADER(X11/extensions/XInput2.h,
have_xinput2=yes
AC_DEFINE(XINPUT_2, 1, [Define to 1 if XInput 2.0 is available]))
could not have been satisfied by this parameter that I pass to configure?
CPPFLAGS=-I/media/34GB/Arquivos-de-Programas-Linux/xorg/Xi-1.5.0/include/
I am a bit lost as to why it doesn't detect nothing.
A curious point that I read in the documentation is that there is a parameter called: --disable-xinput.
Well I am passing it to configure and it obviously didn't disable the test. So I would appreciate any suggestions about how to change the test to try to figure out what is wrong with it (or with my system)
Solution found
If I replace:
if $PKG_CONFIG --exists "xi" ; then
on configure.ac, by:
if $PKG_CONFIG --print-errors --exists "xi" ; then
and then execute autoconf, it will generate a new configure based on this "new" configure.ac that will print all the required libraries that should be passed to configure.
First it was the .pc file of libXi, then the pc. file of Inputproto (that I had to download and install) an so on. I also really had to add libXi's include dir to CPPFLAGS, so it could find XInput2.h.
My final configure command was:
LD_LIBRARY_PATH=/media/34GB/Arquivos-de-Programas-Linux/Glib-2.41.2/lib/ CPPFLAGS="-I/media/34GB/Arquivos-de-Programas-Linux/xorg/X11-1.4.4/include/ -I/media/34GB/Arquivos-de-Programas-Linux/xorg/Xorgproto-2018.1/include/ -I/media/34GB/Arquivos-de-Programas-Linux/xorg/Xi-1.5.0/include/" LDFLAGS="-L/media/34GB/Arquivos-de-Programas-Linux/xorg/X11-1.4.4/lib/" ./configure --prefix=/media/34GB/Arquivos-de-Programas-Linux/Gtk+-3.4.0 PKG_CONFIG_PATH=/media/34GB/Arquivos-de-Programas-Linux/Glib-2.41.2/lib/pkgconfig/:/media/34GB/Arquivos-de-Programas-Linux/Atk-2.15.4/lib/pkgconfig/:/media/34GB/Arquivos-de-Programas-Linux/Pango-1.30.0/lib/pkgconfig/:/media/34GB/Arquivos-de-Programas-Linux/Cairo-1.10.0/lib/pkgconfig/:/media/34GB/Arquivos-de-Programas-Linux/Gdk-pixbuf-2.30.0/lib/pkgconfig/:/media/34GB/Arquivos-de-Programas-Linux/Pixman-0.18.4/lib/pkgconfig/:/media/34GB/Arquivos-de-Programas-Linux/Fontconfig-2.8.0/lib/pkgconfig/:/media/34GB/Arquivos-de-Programas-Linux/Freetype-2.2.1/lib/pkgconfig/:/media/34GB/Arquivos-de-Programas-Linux/Png-1.2.14/lib/pkgconfig/:/media/34GB/Arquivos-de-Programas-Linux/xorg/Xi-1.5.0/lib/pkgconfig/:/media/34GB/Arquivos-de-Programas-Linux/xorg/Inputproto-1.5.0/lib/pkgconfig/:/media/34GB/Arquivos-de-Programas-Linux/xorg/X11-1.4.4/lib/pkgconfig/:/media/34GB/Arquivos-de-Programas-Linux/xorg/Xorgproto-2018.1/share/pkgconfig/:/media/34GB/Arquivos-de-Programas-Linux/xorg/Xcb-1.4/lib/pkgconfig/:/media/34GB/Arquivos-de-Programas-Linux/xorg/Pthread-stubs-0.1/lib/pkgconfig/:/media/34GB/Arquivos-de-Programas-Linux/xorg/Xau-1.0.0/lib/pkgconfig/:/media/34GB/Arquivos-de-Programas-Linux/xorg/Xext-1.1.1/lib/pkgconfig/
I have installed SwiftLint using SwiftLint.pkg in my system. Now I want to customize the rules so I have added .swiftlint.yml file in my root directory. I have added the script. I have followed the steps that are mentioned in the documentation, But somehow it's not working.
Script:
if which swiftlint >/dev/null; then
swiftlint --config "$SRCROOT/.swiftlint.yml"
else
echo "warning: SwiftLint not installed, download from https://github.com/realm/SwiftLint"
fi
Rule in .switlint.yml file :
custom_rules:
comma_space_rule:
regex: ",[ ]{2,}"
message: "Expected only one space after ',"
Your rule is fine! 🎉
I tried it and it is working. You just need to indent properly:
custom_rules:
comma_space_rule:
regex: ",[ ]{2,}"
message: "Expected only one space after ',"
I'm trying to remove an error from my sanity-checking [when I push code to my git repo, there's a hook that checks the code with perltidy & critic... using tidyall as the handler.]
The specific issue I have is with a pre-compiled Grammar Parser.... and this is not something I want to dive in & fix (sorry - that's outside my comfort zone)
If I add a simple ## no critic to the start of the file, then
perlcritic path/to/class/file.pm
comes back
path/to/class/file.pm source OK
however
tidyall --check-only -r .
comes back with
perlcritic /tmp/Code-TidyAll-Frb0/path/to/class/file.pm failed
exited with 2 - output was:
Unrestricted '## no critic' annotation at line 6, column 1. (Miscellanea::ProhibitUnrestrictedNoCritic, severity 3)
I know I can fix this in the tidyall.ini file:
[PerlCritic lib]
select = **/*.{pm}
ignore = **/class/file.pm
.... however I feel there should be a cleaner solution.
(or, why doesn't tidyall critique the same as critic?)
why doesn't tidyall critique the same as critic?
A simple perlcritic on the command line defaults to severity 5, unless you've configured something different in your ~/.perlcriticrc. The rule ProhibitUnrestrictedNoCritic defaults to severity 3, so your tidyall is running Perl::Critic with at least severity 3. As per its documentation, you can change that via something like this in the tidyall.ini:
[PerlCritic]
argv = -severity 4
And then tidyall's checks should be the same as a perlcritic -4 from the command line. (Unless you've configured custom severity levels in your .perlcriticrc.)
Update: As per your comment, you want to check everything at the "brutal" level. In that case, you can create a perlcriticrc file containing the line [-Miscellanea::ProhibitUnrestrictedNoCritic] which will disable that policy, and then point perlcritic at that file by adding the command-line argument --profile /path/to/custom/perlcriticrc.
I saw a similar question here
After reading the answers and comment in the above link I located the 'libmwi18n.so' file and set the LD_LIBRRY_PATH, but I'm still getting this error:
'error while loading shared libraries: libmwi18n.so: cannot
open shared object file: No such file or directory'
I did the following:
locate libmwil8n.so
which gives output
/usr/local/MATLAB/R2012a/bin/glnx86/libmwi18n.so
Then I did
export LD_LIBRARY_PATH= /usr/local/MATLAB/R2012a/bin/glnx86
and ran the shell program again,
./run_app.sh
which returns the same error.
Please help me , how can I solve this problem?
Update-
content of the run_spp.sh
!/bin/sh
# script for execution of deployed applications
#
# Sets up the MCR environment for the current $ARCH and executes
# the specified command.
#
exe_name=$0
exe_dir=`dirname "$0"`
echo "------------------------------------------"
if [ "x$1" = "x" ]; then
echo Usage:
echo $0 \<deployedMCRroot\> args
else
echo Setting up environment variables
MCRROOT="$1"
echo ---
LD_LIBRARY_PATH=.:${MCRROOT}/runtime/glnx86 ;
LD_LIBRARY_PATH=${LD_LIBRARY_PATH}:${MCRROOT}/bin/glnx86 ;
LD_LIBRARY_PATH=${LD_LIBRARY_PATH}:${MCRROOT}/sys/os/glnx86;
MCRJRE=${MCRROOT}/sys/java/jre/glnx86/jre/lib/i386 ;
LD_LIBRARY_PATH=${LD_LIBRARY_PATH}:${MCRJRE}/native_threads ;
LD_LIBRARY_PATH=${LD_LIBRARY_PATH}:${MCRJRE}/server ;
LD_LIBRARY_PATH=${LD_LIBRARY_PATH}:${MCRJRE}/client ;
LD_LIBRARY_PATH=${LD_LIBRARY_PATH}:${MCRJRE} ;
XAPPLRESDIR=${MCRROOT}/X11/app-defaults ;
export LD_LIBRARY_PATH;
export XAPPLRESDIR;
echo LD_LIBRARY_PATH is ${LD_LIBRARY_PATH};
shift 1
args=
while [ $# -gt 0 ]; do
token=`echo "$1" | sed 's/ /\\\\ /g'` # Add blackslash before each blank
args="${args} ${token}"
shift
done
"${exe_dir}"/b $args
fi
exit
Your LD_LIBRARY_PATH should not include the library itself, but rather, the path that contains the library. Try:
export LD_LIBRARY_PATH=/usr/local/MATLAB/R2012a/bin/glnx86
or perhaps appending this location to the path:
export LD_LIBRARY_PATH=${LD_LIBRARY_PATH}:/usr/local/MATLAB/R2012a/bin/glnx86
EDIT: (after more info on question provided)
The shell script run_app.sh sets up it's own library path, using the environment variable LD_LIBRARY_PATH (it is declared in lines 17--24, and overwritten in line 26). This means that anything that is set in your shell before executing the script will be overwritten.
To include the path for libmwi18n.so, append the path within the script, after line 17 and before line 26, with:
LD_LIBRARY_PATH=${LD_LIBRARY_PATH}:/usr/local/MATLAB/R2012a/bin/glnx86
(Note: there is also a printout of the LD path so you should be able to tell whether the glnx86 path is present or not).
I think you want glnx86, not glnx68.
Apologies if that was just a typo in your question.
I am trying to run some kind of programm using command line, but I got an error.
The command line is:
quantisnp2.exe --outdir D:\output\ --config "C:\Program files\QuantiSNP\params.dat" --levels "C:\Program files\QuantiSNP\levels.dat" --sampleid CNV1 --gender female --emiters 10 --Lsettings 2000000 --doXcorrect --genotypes --gcdir D:\gc\ --input-files C:\Program files\CNV1.txt
QuantiSNP:Single-file mode input find.
QuantiSNP:Processing file: C:|Program
QuantiSNP:Local CG content directory specified. Local CG content correction will be used.
??? Error using ==>textread at 167
File not found.
Error in ==> quantisnp2 at 293
The first thing I'd be looking at is the unquoted C:\Program files\CNV1.txt at the end of the command (all your other ones are quoted).
There's a good chance that's being treated as two arguments, C:\Program and files\CNV1.txt.
You may also want to check the spelling of emiters, I'm pretty certain the correct English word would be emitters though, of course, this could be a case of the QuantiSNP developers not knowing how to spell :-)