this is a follow up of this issue:
Problems with apache MAMP 3 and Yosemite
I have followed the recommendation (upgrading Mamp to the latest version) but the Mysql server still does not start: I am using default ports 8888 and 8889. When setting a different port (e.g., 80) both servers do not run...XAMP works fine instead.
I had the same problem running MAMP, I found that updating the envvars_ file under MAMP/Library/bin to _envvars and then changing the Apache Port to 8888 and the MySQL Port to 3306 got it working for me.
I hope this helps!
Related
I have been running MAMP for about a year with no problems. Today when I try to load the pages I have hosted there I get a 404 error. I'm not sure what has changed. The file path to the document root is the same. Does any one have any ideas? Thanks in advance for any help!
Mac: 10.12.6
Mamp: 4.2
PHP: 7.1.6
Web server: Apache
MySQL: 5.6.35
Ports:
Apache: 8888
Nginx: 7888
MySQL: 8889
Would any other info be helpful?
Thank you!
Ben
I figured out my problem, I'll share it here in case it helps someone else.
When I first configured MAMP I had set the port for Apache to the computers default port, 80. That way I could go to localhost/mywebsite. Somehow the port got changed to 8888 which is how MAMP comes out of the box. With that port setting, to find my pages I would have had to go to localhost:8888/mywebsite. I change the port back to the default port and the problem was fixed.
I'm using MAMP to set up a magenta installation. But after a fresh install of MAMP, I wanted to set up the db and it's giving me this error:
MySQL said: Documentation
Cannot connect: invalid settings.
phpMyAdmin tried to connect to the MySQL server, and the server rejected the connection. You should check the host, username and password in your configuration and make sure that they correspond to the information given by the administrator of the MySQL server.
I've been researching for over an hour and everything I find doesn't help. I never changed the default password for mysql and I'm able to log in using the command line and -uroot -proot. I also tried changing the password and it didn't make any difference.
OSX 10.11.0
MAMP 3.5.1
PHP 7.0.8
Make sure your PHP version in MAMP is 5.6.10.
I've been having the exact same problem and just switched the PHP prefs from 7.0.8 to 5.6.10, restarted the servers and I can get into phpMyAdmin now.
It was driving my bonkers as well.
I just downloaded Netbeans IDE7 with the Glassfish 4.
I just made a project to test it out and see how it goes, and I got this error right from the start:
Could not start GlassFish Server: DAS port is occupied while server is not running
[location]: Deployment error: Could not start GlassFish Server: DAS port is occupied while server is not running
See the server log for details.
BUILD FAILED (total time: 1 second)
I have reinstalled it three times, with the Glassfish and without and then later add it to Netbeans, i changed the domain.xml name="admin-listener" port="4848" to something different
i did this cmd code netstat -aon | find ":80" | find "LISTENING" and closed the programm.
i ran as administrator i think i did almost everyting but it wont simply run, and it keeps returning to the same error
usually i would have given up but this software is required for a school project.
i will try everything.
i hope someone can help me.
Thx in advance
You have to find the process that has taken the port you need. You can try finding it by running the terminal with the command:
netstat -aon | find ":80" | find "LISTENING"
Find the information you need and than kill the process with specific PID in Task Manager.
I hope you find this useful,
Thanks.
A few points:
Why not download NetBeans 8 that also includes GlassFish 4?
Assuming that you have successfully figured out that no other process is listening on port 4848, then Which version of the JDK are you using? Can you try JDK 7 if you are using JDK 8?
Looks like you are not alone - see NetBeans bug 237477.
Note that this isn't the only problem. I run on a Mac and can use the asadmin start command successfully on the remote server. IF I try to start it from NetBeans, it gives me this message.
One hint might be that the domain.xml file is set so that the listening port is 9090, the properties screen for the remote server, which I entered 9090 for, tells me the HTTP port is 23043. I can't edit it. Everytime I try to create that remote server it sets it to this value. The server will run fine if I start it by hand on the remote server, but NetBeans doesn't think it is running.
This occurs because I had to select domain2 because NetBeans says domain1 is already registered on my local machine. I wanted to have a local domain1 and a remote domain1 that are identical so I can test locally, and then deploy remotely.
This error message could be misleading, because it is the same when IP adress of glassfish server in netbeans settings is wrong (not port).
By my experience with this over win 8.1 + Netbeans 8.0 + Glassfish 4.0
The problem resides in permission of folder in windows that block the server execution
I solve the problem changing the permission of the glassfish/domain/domain1 folder for xxxx/user to totalcontrol
If this not solve your problem, try launch the server over console:
asadmin start-domain --verbose
And read the exceptions to try solve the problem.
-EDIT:
Reading other post to try help:
like this: Glassfish server started failed in netbeans 6.9
Or check your firewall:
allow >> C:\Program
Files\glassfish-X.X\glassfish\modules\glassfish.jar
In my case when using the command
netstat -aon | find ":4848" | find "LISTENING"
I noticed that one process was occupying this port. When checked what it was I noticed it was VMWare NAT controller, because I previously had configured a network adapter to listen to this port.
Just stopped all VMWare related services (in my case I didn't need them for development purposes), and solved the problem.
Go to Task Manager -> Services -> Stop Process whose PID IS 3136,2268,2468 ,23.... and near Range in PID. All processes near to the web server's PID.
It works for me on Windows 8.1 pro & Windows 7.
I had the same error message.
Turned out it was caused because my firewall blocked port 4848
May be late but I solved this issue by deleting the app server from the Netbeans and by adding it again. In my case Netbeans 8.2 and Payara 4.1 instead of Glassfish.
If you changed the host of Glassfish server then set it to localhost it should work.
I am running CentOS 6.4 through vagrant.
I have put this line inside my Vagrantfile:
config.vm.network :forwarded_port, guest: 80, host: 8080
Then I have installed nginx in the VM and verified it's working with:
wget http://locahost/
Works fine.
But from my host machine (Macbook Air, Mountain Lion) when I go to:
http://localhost:8080
It times out. Did I miss any configuration in Vagrantfile?
I have used this box:
https://github.com/NREL/vagrant-boxes
Have you checked your iptables?
It's a common mistake: when you use provisioning you also have to configure your iptables. (For puppet you have this module.) If you don't want to work with a firewall you can just do vagrant ssh followed by sudo service iptables stop.
What do you see when you go to your browser? Does it say Data not received or it never stops reloading? Do you get any messages in your browser? The server config file must be a bit messed up. Try reloading the server configuration, and restarting it.
Also, try changing the port number to something else. With the newer version of Vagrant, the syntex looks a bit different. So you have to do:
config.vm.forward_port 80, 2759
This is the config file that I use for one of my instances:
Vagrant::Config.run do |config|
config.vm.box = 'rails-dev-ready'
config.vm.host_name = 'rails-dev-ready'
config.vm.forward_port 5800, 5800
config.vm.forward_port 1080, 1090
config.vm.forward_port 80, 2759
config.vm.provision :puppet,
:manifests_path => 'puppet/manifests',
:module_path => 'puppet/modules'
config.vm.share_folder "sharedapps", "/home/vagrant/sharedapps", "sharedapps"
end
I recently set up a CentOS 6.4 box. My ports got all messed up because of iptables. I just disabled the service. It's in /sbin/sevices.
You may run the following command to find out if any other process (such as Tomcat) is bind to port 8080:
lsof -i :8080
If so, that may cause the problem.
I have found a solution,
I have found that there is an issue with Apache + vagrant, and sometimes Apache won't start automatically.
Please try: sudo service apache2 start once logged in via ssh.
I was having issues with Vagrant and all the error messages indicated a networking problem, but in reality my Apache service just wasn't starting on vagrant up
Try and error.. did not helped me after 2 hours even with "googling" around. No one seems to have my problem or there is a easy solution that i don't see.
My phpinfo() show xdebug just fine:
version 2.1
xdebug.remote_enable On
xdebug.remote_handler dbgp
xdebug.remote_host localhost
xdebug.remote_mode req
xdebug.remote_port 9000
My netbeans listen to port 9000 (but just on ipv6; may be this is the problem):
tcp6 0 0 :::9000 :::* LISTEN 5290/java
Netbeans is reachable through telnet:
$ telnet localhost 9000
Trying 127.0.0.1...
Connected to localhost.
But netbeans does not start the browser until i click the "stop" button. Then it opens up a browser with ?XDEBUG_SESSION_START=netbeans-xdebug. How to disable ipv6 for netbeans? I don't want to disable the entire ipv6 support (ipv6 support in enabled in phpinfo()). Any other ideas?
Version:
OS: Ubuntu 12.04 LTS
Apache: 2.2.22
PHP-CGI: 5.3.10
Netbeans: 7.2
Java: 1.7.0_05
I had the same problem as the browser not coming up and following is what fixed the problem.
There are actually 3 potential locations where you can specify the debugging port
Php.ini -- {xdebug.remote_port=9000}
In Netbeans IDE under - preferences - php - general {debugger port =9000; session ID= netbeans-xdebug}
In the run configurations - Advanced !! DONT set this one - it refers to 'Debugger Proxy' if you set this the browser window will not come up until you have maintained the same proxy settings in the netbeans - preferences - general tab.
PS: all of the above or on a Mac..
I had a bad run configuration in project. Netbeans was waiting for a debugging proxi on localhost:9000. I did not remember to set this setting. If someone has the same problem check this configuration too.
In my case the problem the project URL under Project properties in Run configuration was pointing to a subdirectory instead of the root directory of the server, after i changed to localhost everything was fine.
I found the answer after reading this article.
http://shinephp.com/netbeans-7-0-php-waiting-for-connection-to-xdebug/