I' m attempting to stop one of two channels notification. I got an error after entering this command.
C:\Python27>python D:\gsutil\gsutil notification stopchannel 99467068-b556-4664-
a32a-f593cf1d50df WTgOzw4yFEJQxhSZqCq_7-g3Rro
Removing channel 99467068-b556-4664-a32a-f593cf1d50df with resource identifier W
TgOzw4yFEJQxhSZqCq_7-g3Rro ...
**NotFoundException: 404**
Anyone please suggest how to fix it.
Regards,
Related
I get lately a lot the HAL_UART_ERROR_FE (Frame Error). I have no where found what causes this Error in the first place. Can someone explain to me what was going wrong that i get this error?
A framing error can be caused by
Mismatched bitrate
Noise on the line
Starting the receiver while the other endpoint is already transmitting
First let me say I have researched this topic and looked through the following link and it did not help
Link 1
I tired un-checking elements in the Attributes Inspector (as described in link1) .
I also tried adding the code to the .plist file as described in LINK 2 and it did not help.
Where I seem to be getting the error is when i execute the following sequence of events using a button to start it:
user presses a button
alert pops up to ask the user if they wish to proceed
if yes a button now becomes un-hidden to allow the user to send data to my domain
once the new button is pressed I use a fetch to get a bunch of core data and then send it to my domain using an NSString(data: data!, encoding: NSUTF8StringEncoding)! call
right after all the data is sent to my domain I get the following error every time:
_BSMachError: (os/kern) invalid capability (20)
_BSMachError: (os/kern) invalid name (15)
It does successfully send the data but the error stays... PLEASE HELP
I was getting this error executing not long run operations but some operations that take long on handler blocks of UIAlertActions. I solved by putting operations in a background thread with:
NSOperationQueue().addOperationWithBlock {
// Operations Here.
}
Accessing the core data can take longer then you think and accessing it from button handler can make that error appear because some handlers have limited amount of time to respond.
For me this error occurred when I tried to set the button title to an optional string:
self.titleButton.setTitle(self.playlistItem?.title, for: UIControlState())
The error messages do not occur when changed to this:
self.titleButton.setTitle(self.playlistItem!.title, for: UIControlState())
Feel free to post relevant code in your question.
Hope this helps...
I am using ispin and got an error stating spin: trails end after 10 steps and transition fail.
How can I prevent this error from happening?
You prevent the error from happening in one of two ways:
fix your Promela model - you have a bug in your Promela that needs to be removed
you've found an error in the system that you are modeling. Congratulations. You now report the error to the person in charge of the system that you are modeling.
In practice, when you have a trail indicating an error, you next perform
spin -p -t <name of the model>.pml
which will print out the step by step model executions that lead to the error. You scour them to confirm that they are correct - if so, see #2 above; if not correct, see #1.
I had the same problem and it is fixed after putting -DVECTORSZ :
in the advanced parameters settings window of verification tab.I have also increased the physical memory to 2048.
Problems:
I am able to use hyperterminal to send SMS via COM9. All good.
But I cannot properly use AT commands in matlab to do the same thing. I even cannot pass the first "AT" step. The error I received is "Unexpected Error: Unexpected Error: An error occurred during writing." It seems coming from fprintf. Help!
Here is the codes:
try
s = serial('COM9','BaudRate',9600);
fopen(s);
tx='AT';
tx1=char(13);
tx2=char(10);
fprintf(s, '%s', sprintf('%s%s%s', tx, tx1, tx2));
out = fscanf(s);
disp(out);
fclose(s);
catch aException
fclose(s);
error(message('MATLAB:serial:fprintf:opfailed', aException.message));
You have done the serial communication part properly. In AT command set, to check the working of the device it's enough if you send 'AT' and a line feed. Also you gave both carriage return and line feed to the device simultaneously. That could create a problem. Also while writing MATLAB code for the first time, try sending the characters individually as you do in Hyperterminal. It will solve your problem.
There will be no problem from MATLAB's perspective when the communication link is created successfully.
I've been dealing with this problem since last week...none info in the internet that actually solve my problem....n I'm very very new to MSMQ
Whenever i try to create a new private queue....i get this error message
alt text http://www.freeimagehosting.net/uploads/745d915a1d.png
and then when i check services ,the Message Queuing Triggers is not started..when i try to start it ...it gives me this error:-
alt text http://www.freeimagehosting.net/uploads/a6c368072c.png
then when i check the event viewer :-
alt text http://www.freeimagehosting.net/uploads/6b8c751c71.png
But still i cant create new queue....please help me...i've been stuck here for a week... :(
it's ok guys...i'm able to create the q already :) through Computer Management
System.Messaging.MessageQueue.Create(#".\Private$\MyPrivateQueue");
More here
https://msdn.microsoft.com/en-us/library/5yka0xsf(v=vs.110).aspx