I have a subform bugging me. The mainform contains buttons etc. Everytime the user close/open the form, the columns width is reset to whatever the table likes. If i open the table directly, the size is as i want. If i change it in the subform, it is not saved. (See screendump)
I would like "Phase" to stay about 2 cm width. I can enter the subform and edit the "Width" but that is only applied to the other views.
I hope you can help, Emil.
I realize this post is almost 2 years old, but I ran into the same problem and came across this post.
I am running MS Access 2013 on Windows 7 Ultimate. I did not find the solutions offered here to work for me, so, I set out to find something that would work for me before I went to VBA code. (Incidentally, I appreciate the link offered by #Patrick_Honorez in his comment on the original post because that was going to be my fall-back solution.)
Anyway, here is what worked for me and I hope perhaps it will work for others as well:
Open the parent form.
In the subform, right-click the column header
for the column for which you wish to adjust the width.
Select the “Field Width” item from the context menu.
In the “Column Width” dialog that appears in step 3, enter the desired column width in points, or, use the [Best Fit] button. Then click the [OK] button to close the dialog and return to the form.
Right-click the parent form’s border to bring up the parent form’s context menu. Click the “Save” item in the context menu.
Now close the parent form.
The next time the form is loaded, the column widths should be as set it step 4 above--at least they are for my setup.
I see this post is quite old and OP must have figured someway to tackle the issue. I came across same issue today and found solution on this link.
For anybody else having same issue, use following code (I modified the code a little because original code from the above mentioned post saves column width of only text boxes but my form has combo boxes too, column width of which was not getting saved) in close and open events of your subform and then open main form in Form View and then manually select desired widths either by mouse, by entering column width value or using best fit. Save the form and reopen to check results. That's it.
Private Sub Form_Close()
Dim ctrl As Control
For Each ctrl In Me.Controls
If (ctrl.ControlType = acTextBox Or ctrl.ControlType = acComboBox) Then
SaveSetting "propertiesDBS", Me.Name, ctrl.Name, ctrl.ColumnWidth
End If
Next
End Sub
Private Sub Form_Open(Cancel As Integer)
Dim ctrl As Control
Dim frm As Form
Dim w As Long
For Each ctrl In Me.Controls
If (ctrl.ControlType = acTextBox Or ctrl.ControlType = acComboBox) Then
w = GetSetting("propertiesDBS", Me.Name, ctrl.Name, 0)
If w <> 0 Then ctrl.ColumnWidth = w
End If
Next
End Sub
I know this is late to the party and most likely going to be the last comment anyone reads, but this can be done quite simply in MS Access 2016 - by someone like myself who has no more than 4 days experience in databasing overall and no experience with writing custom Macro's or VB Script (using only what is native to MS Access).
Here's how I did it.
Scenario - Split Form (Form + Datasheet).
Extra Recommendations:
It pays to be across all properties of every object type in your database, as a change in a field property can cause unpredictable erratic effects, which take ages to figure out why it happened and how to stop it from happening again, whilst delivering your desired outcome.
Me.Requery in your VBA script after every necessary event and also in your main form (generally the 'After Update' event is used most), and be wary that too many Me.Requery's (in unnecessary events) can also be detrimental - so too much of a good thing can be a bad thing.
Bottom Line Up Front - Modify the format of your query that is to be exported/printed.
In 'Design View' of the query you are concerned with, ensure that the fields are in the order you need them outputted in first as this is exactly how the macro will present them for export/print (example could be "Australia" then "Northern Territory" then "Town's In The Northern Half Of The State" then "Darwin" then "Suburbs In The Northern Half Of City").
Switch to 'DataSheet View' in the same query and use the top left folded over triangle looking thingy to highlight the entire data set then right click that same triangle to present an options menu. Select 'Row Height' and type in "15" (default row height in Excel).
Deselect the entire spreadsheet and this time select every column (left click the left most column, hold shift button, scroll over to the right to the far end of the data set and click the last column) and then right click one of the highlighted columns to present another menu. Select 'Field Width' and within that new pop-up menu select 'Best Fit' and then 'OK'.
(Optional - not sure if this helps or hinders but I did it for my purpose) With the columns still selected right click one of the highlighted columns again and select 'Freeze Fields'.
My scenario had buttons with macros configured to run filtered reports so I was able to check this by simply clicking any of those buttons and seeing the report formatting, which it held true to the work I had just done. I exported using another button with a macro that exports to Excel with 'Print Formatting' selected (my main form also had the datasheet view as the only thing that could be printed and was also set in 'Print' formatting.
The Excel spreadsheet opened with all row heights and column widths in a way that I could read every field/record with perfect ease and without extra modification.
This also worked for cascaded combo boxes, with the export only outputting the 'drilled down/filtered' datasheet records, in a format that required no further modifications.
Hope this helps someone, as its saved my hide! :)
Open the Main form in Design. Go to the SubForm. Click on the square at the top left of the SubForm and select 'Properties'. Right-Click the control 'Phase' and click 'Properties'.Click the 'Format' tab and select 'Width'. What do you see there? That should control the widht of control 'Phase' unless you have some overriding coding elsewhere. Input the size you want and see what happens.
Use continuous forms instead. It gives you complete control over how your subform displays.
If you open your subform directly, your property sheet menu should display automatically if the default view is "Datasheet." Click on "All" and change the "Auto Resize" property to "No." This should solve the issue and avoid the need for VBA.
This only works when you open the subform separately. So if you want the changes to be reflected within your main form, you'll have to close it and switch back and forth.
Super annoying by default.
It seems to work as one would expect of you set the view mode to layout view. Drag column widths as needed and save. Go back to form view and it works. It's really dumb it doesn't work the same way in form view our design view.
In Access 365, open main form, right-click sub-form datasheet columns that need width adjustment, use the Field Width to adjust, click on border of main form to select Layout view, and save changes.
Open subform in datasheet view (by double click on subform in the left pannel)
Resize columns as you want by dragging or by right-click the column header for the column for which you wish to adjust the width and select the “Field Width” item from the context menu.
Right-click the subform border to bring up the context menu. Click the “Save” item in the context menu.
Either open the Main Form in Layout View or directly open your Subform in Datasheet View. Right Click on the Field Header, select Field Width, and enter the desired width. Save. Bewm.
My solution (Access 2016) was to create the main & subform, recreate the subform on its own using form wizard and set it up the way I want it, rename the original subform to something else, and finally rename the recreated subform to the original form name. Open the main form and the subform should be laid out the way you want it. You can then delete the original subform you renamed.
Im trying to cut down on the clutter of my form since the data im getting can fill in more or less fields from my table.
as of right now im trying to build an event but I do not know the right syntax to use to create my event.
right now i have:
= if toggle.onclick ="yes" then
data.visible=true
else
data.visible=false
end if
in the After Update tab of the Event tab.
I hope that gives you an idea of what im trying to do.
I have this on a test form so the only objects are:
checkbox name "toggle"
textbox name "data"
the text box is default to not visible at the moment.
my goal is to have a list of check boxes and once they are checked their corresponding text box would appear on a refresh. this way the workers wont be intimidated by the amount of textboxes are on my current form. also will reduce the vast clutter on the current form.
By default, the 'Toggle' value will be True or False - not 'yes' or 'no'. Thus the following is what you need to toggle fields:
Private Sub Toggle_AfterUpdate()
If Me.Toggle = True Then
Me.Data.Visible = True
Else
Me.Data.Visible = False
End If
End Sub
can somebody please tell me why my pop-up menu list get disappear when I set a string which actually belongs to one of the item in the list? I want this string to be appear as default when GUI gets open, however, want other items to be in the pop-up menu.
For example, pop-up list contains:
Set_1
Set_2
Set_3
Set_4 etc..
And, in the function OpeningFcn, I am settting:
set(handles.popupmenu1, 'String', 'Set_1');
This makes 'Set_1' to appear when I open GUI. However, it makes other items (Set_2, Set_3 etc) disappear from the GUI. Thanks.
The String property of a popupmenu uicontrol sets the entire text that is displayed in the menu.
To select a particular option, set the Value property to the index of the item to be selected. In this case, since Set_1 is the first item, set the Value property to 1.
I have a full search panel with listbox whose value are read from DB.when a item in listbox selected and search is made.If the results are not found the search panel is condensed (one more search panel) and in condensed search ,we can change the search criteria ,selected a different item in the list box .after changing the search criteria and if search is made ,when the full search panel appears,the value of the list box in full search panel should be same as the one changed/selected in the condensed search panel.
How can we accomplish this.
In simple - If i have two list boxes, load a list box and set the value of the listbox same the other listbox.If value of one listbox is changed, the other should be changed and the value of this listbox is set with the value selected in the previous one.
I would do the following
//you have something like this
ListBox listbox1;
ListBox listbox2;
//add a change handler
listbox1.addChangeHandler(new ChangeHandler() {
#Override
public void onChange(ChangeEvent event)
{
int index = listbox1.getSelectedIndex();
//do your update code here for listbox2
//like a listbox2.setSelectedIndex(index) or something
}
As far as I see its an easy implementation. Add a value change handler on the first listbox and do whatever you want in onChange method.
Regarding your panel need to be collapsed when there is no search results, you can always use vertical panel and set its height to 100% and add another panel to it or Use Dock Panel and add panels to south or best use disclosure panel and play around with it.
I have a few text boxes which have to be filled with numeric values from 0 to 100. Below them there is another text box which stands for a total (the sum of the values from the text boxes above). How can I update the sum text box while typing in any of the other text boxes above?
If you are happy that the sum box updates after a box is updated (enter, tab or such like is pressed), then this can be done without any code. First, you will need to set the format of the textboxes to be summed to numeric, then the control source of the sum box becomes:
=Nz([text0],0)+Nz([text2],0)+Nz([text4],0)+Nz([text6],0)+Nz([text8],0) ...
Note the use of Nz, it may be possible to eliminate this by setting the default value property of the various textboxes to be summed.
A large set of controls that need to be summed in this way is often an indication of an error in the design of the database. You would normally expect this kind of thing to be a separate recordset, which could more easily be summed.
I know this is old, but Google didn't come up with much for this topic and this thread didn't really help either. I was able to figure out a very easy way to do this, so hopefully anyone else looking for this will find this helpful.
My need was for actual text as opposed to numbers, but the same applies.
To do what the OP is asking for you'll need at least 3 textboxes. 1 is the textbox you want to have updated each time you type, 2 is the textbox you will be typing in, and 3 is a hidden textbox.
Set textbox 1 to reference the value of the hidden textbox 3 in its control source:
="something in my textbox " & [textbox3]
In the OnChange event of textbox 2 right a line that will set the value of the hidden textbox 3 to the Text property of textbox 2 that you are typing in:
Private Sub textbox2_Change()
Me.textbox3.Value = Me.textbox2.Text
End Sub
Each time the value of the hidden textbox 3 gets updated, the calculation/reference in the displayed textbox 1 will be updated. No need to save caret locations or anything else mentioned in this post.
I was able to do this in Access 2007 by using the On Lost Focus event of the text box.
Just put something like this on the On Lost focus event of each text box that you want to be added , just make sure to set the default value of each text box to 0.
Me.Totals.Value = Me.Text1.Value + Me.Text2.Value + etc..
The moment you click on the next text box or anywhere as long as it loses focus, your sum will already be on the Totals box. You may add as many text boxes as you like, just include them in the code.
This is problematic due to the asinine requirement in Access that you have to set focus to text areas before you can get their value. I would recommend you change your design so that the text field is updated in response to a button click instead of on change.
If you want to go the update-on-change route, you would attach change events to each of the addend text fields. The event handlers would need to save the caret position/selection length, update the sum in the output text field, and restore the caret position. You need to save/restore the caret position because this is lost when the focus changes.
Here's an example for two text fields (txt1 and txt2). The output field is named txtOutput.
Private Sub txt1_Change()
Dim caret_position As Variant
caret_position = Array(txt1.SelStart, txt1.SelLength)
UpdateSum
txt1.SetFocus
txt1.SelStart = caret_position(0)
txt1.SelLength = caret_position(1)
End Sub
Private Sub txt2_Change()
Dim caret_position As Variant
caret_position = Array(txt2.SelStart, txt2.SelLength)
UpdateSum
txt2.SetFocus
txt2.SelStart = caret_position(0)
txt2.SelLength = caret_position(1)
End Sub
Private Sub UpdateSum()
Dim sum As Variant
sum = CDec(0)
txt1.SetFocus
If IsNumeric(txt1.Text) Then
sum = sum + CDec(txt1.Text)
End If
txt2.SetFocus
If IsNumeric(txt2.Text) Then
sum = sum + CDec(txt2.Text)
End If
txtOutput.SetFocus
txtOutput.Text = sum
End Sub