I'm trying to install mongo DB on my local machine with the installer from the official website. But I'm continuously getting this message, can someone help?
I've tried the solution provided here but didn't help.
I suggest doing the following:
Hit Win+R to open up you run.exe then inside of it enter services.msc to open up services. Try locating the service under the name of MongoDB Server and set the Startup Type manually to Automatic - [In addition to that, you could set the username and password manually. If you get a message saying the user was granted login as a service right, try hitting retry on the MSI dialog and see if it starts].
Important:
Don't forget to save and close everything (services.msc) before continuing.
Also very important, you should (must) check your .NET framework version and update it to version 4.5 and above. You could download a software like eg Driver Booster to update all of your drivers and additional components that are outdated.
I ran into the same issue. My problem was the installation location. I was trying to install under C:\MongoDB. I resolved it by installing in the default MongoDb location which is C:\Program Files\MongoDB.
For me this is usually an issue with the configuration file %ProgramFiles%\MongoDB\Server\x.x\bin\mongod.cfg
At some time there was an invalid option "snmp" enabled (only valid in enterprise version).
Nowadays, although the installer asks for directories for data and logs it doesn't ALWAYS seem to use these, but defaults to %MONGO_DATA_PATH% or %MONGO_LOG_PATH%, respectively. I don't know where these should be defined, but the server fails at accessing c:\data\db (which doesn't exist). So you have to correct the paths.
I also faced this kind of error. But I just change the Network service to Local system in Log On As tab.
Follow my step-by-step below to resolve it:
Press Win+R, type: services.msc, then looking for MongoDB Server (MongoDB)
Double click on MongoDB Server (MongoDB).
Then it will open properties tab. On that tab click on Log On
After that check two items i.e. Local System account and Allow service to interact with desktop
After that press Apply and OK button. That's it, cheers!!
Open command prompt and copy the following command:-
"C:\Program Files\MongoDB\Server\4.2\bin\mongo.exe"
NOTE: This Tricks is work on my Windows 8.1 PC.
Comment out string with mp: in configuration file: %ProgramFiles%\MongoDB\Server\x.x\bin\mongod.cfg
Like this:
...
#snmp:
#mp:
Click Windows+r, type lusemgr.msc , Go to Groups and double click Administrators, Click Add, Click Advanced and click Find Now. Double click in Network Service (in bottom list) and click OK.
It worked for me.
Installing in the other locations other than the windows directory caused me this error. Reinstalling the setup with the recommended method of "complete" fixed it.
The problem occurs if you have Windows version previous to Windows 10.
Install the following update before installing MongoDB. Click on the link below.
https://support.microsoft.com/en-us/help/2999226/update-for-universal-c-runtime-in-windows
It worked for me.
The problem occurs if you have Windows version previous to Windows 7. Install the following update by going to below link you have to download
Windows6.1-KB2999226-x64.msu
#You have to download and install then go to servies.msu and start MongoDB server by Start also go into log on and set to #local machine
https://support.microsoft.com/en-us/help/2999226/update-for-universal-c-runtime-in-windows
I have the same issue with Eclipse (Neon 4.6 eclipse installer by Oomph 32 bit) as in this question and as explained there I have downloaded the automatic configuration script (the script is set up through the Group Policy so I can’t change my LAN settings) that my browser is using. I used the host and port in the return statement and did as explained below
Select the "HTTP" line and click the edit button
Add the IP address and port number above to the http line:
Does anyone know what else I can try because I am still getting a network problem message?
Your help will be appreciated
Proxy Network problem message:
I have changed the active provider to Manual and retried again, then it worked.
I installed an old version and it's worked well.
this is the link for the old version:
https://www.eclipse.org/downloads/packages/release/oxygen/2
You can download a zip file of the Eclipse package you want and explode it in your filesystem where you want it,
Here is link for Eclipse package for windows:
https://www.eclipse.org/downloads/download.php?file=/technology/epp/downloads/release/2021-06/R/eclipse-java-2021-06-R-win32-x86_64.zip&mirror_id=17
Or select another package here:
https://www.eclipse.org/downloads/packages/
For me, I had similar issues to this that related to my office network and their use of a security tool called Netskope which needed its root-certificate into the jvm that would be used by the Eclipse installer. I elaborated on my workaround steps in this other thread:
https://stackoverflow.com/a/69171147/1302220
when I go to Install new software and select an update site, I get a "HTTP Proxy Authentication Required" error.
I have searched the internets for quite some time, and I still did not get an answer.
Facts:
I get this error for every update site.
I am able to access the update site link both in an internal or external browser.
I am using the "native" proxy in eclipse network settings.
direct proxy in eclipse network settings does not work either.
our helpdesk told me that it's not possible to set up the manual proxy in eclipse network settings (or they don't know)
I've tried manually inserting a proxy server:port that I found in a proxy.pac file that I've discovered, no luck...
I've tried reinstalling Eclipse, re-adding and/or reloading repositories and deleting repo cache dir
I'm using: -Djava.net.preferIPv4Stack=true in ini file
I've tried mirroring the repositories using both methods, but log file gives the same proxy error
My system:
Eclipse for PHP Developers
Version: Luna Service Release 1a (4.4.1)
Build id: 20150109-0600
Windows 7, 64bit
Just add this at the end of your eclipse.ini :
-Dorg.eclipse.ecf.provider.filetransfer.excludeContributors=org.eclipse.ecf.provider.filetransfer.httpclient4
In my case I had to set the proxy also to manual (SOCKS should be unchecked). But then, no more hassle.
It basically disables the default Apache HTTP client and will use an HTTP client based on the JRE URL connection.
See: https://wiki.eclipse.org/Disabling_Apache_Httpclient
Edit:
There is a new Apache HTTP client version for which the parameter value has changed:
-Dorg.eclipse.ecf.provider.filetransfer.excludeContributors=org.eclipse.ecf.provider.filetransfer.httpclient45
To disable both use:
-Dorg.eclipse.ecf.provider.filetransfer.excludeContributors=org.eclipse.ecf.provider.filetransfer.httpclient45,org.eclipse.ecf.provider.filetransfer.httpclient4
I could solve the same problem by going to "Windows" → "Preferences" → "Network Connections" and set "Active Provider" to "Direct". See more details and a screenshot in my answer here.
Switch to the manual proxy options
Enter your proxy, user and password
Do it for al except SOCKS. SOCKS you may leave empty.
I've tried a lot of solutions in Google, but nothing :(
I was going to forget about eclipse, but suddenly it worked :)
In the end I talked to a guy who manages the proxy settings in our company and luckily he did some changes to the proxy server and now I'm able to install addons & update software from within eclipse :-)
For my proxy settings, I HAD to leave SOCKS proxy configuration empty after entering manual proxy settings for both HTTP and HTTPS.
Leaving them all empty didn't work, and filling them all out didn't work either.
It worked for me using this in eclipse.ini:
-Dorg.eclipse.ecf.provider.filetransfer.excludeContributors=org.eclipse.ecf.provider.filetransfer.httpclient45,org.eclipse.ecf.provider.filetransfer.httpclient4
Source: https://wiki.eclipse.org/Disabling_Apache_Httpclient45
If you are using eclipse through a virtual machine, then set the network settings to manual in Eclipse. That should solve the issue.
This is the error I am getting after starting SDK manager and also while updating or downloading packages(Download interrupted: Unknown Host dl-ssl.google.com). My ADT is also updated to Build: v22.6.2-1085508. I have read all the post regarding this and tried
Using https instead of http while using Help>install new software (getting error could not find https://dl-ssl.google.com/android/eclipse/)
No proxy.
Run SDK with admin privilege.
No firewall blocking .
I am not able to post the image because I am a new user , so i m copying the error and posting it , please don't mind .
This is type of error with many links like this ..
Failed to fetch URL https://dl-ssl.google.com/android/repository/sys-img/android-wear/android-wear-sys-img.xml, reason: IO Unknown Host dl-ssl.google.com
Done loading packages.
Also I have read many answers on this site and other but nothing has helped so far.
Please help me .
Thank you
This might be because of Android SDK Manager not being able to connect to Google server. This article helped me a lot:
Tools > Options... and check Force https://... sources to be fetched using http://...
Just wanted to add how I solved this problem if anyone comes here looking for an answer.
Comodo firewall runs in background even if you disable the firewall and that causes problem with SDK . I had the same problem.
Steps I took to resolve my problem:
run comodo settings
defense+
list active processes
add adb.exe to trusted processes
restart server: run "adb kill-server" "adb start-server"
For Comodo 6.x
Open Comodo
Click Tasks Icon at right top
Click Advanced Tasks
Click Open Advanced Settings
Select Security Settings --> File Rating --> Trusted files from left panel
Click on the upward arrow icon at the bottom
I was also getting same error : Unknown Host Errors while installing ADT plugin in eclipse
Go to Setting -> Default setting -> select "Android SDK" from left side Panel. Select required components Which you want to install. - >Apply -> Ok.
Please let me know if still you are facing issue.
Regard,
Pappu.
I was trying to add the PDT,
Indigo - http://download.eclipse.org/releases/indigo
Unable to read repository at http://download.eclipse.org/releases/indigo.
Unable to read repository at http://download.eclipse.org/releases/indigo.
http://download.eclipse.org/releases/indigo is not a valid repository location.
So what's the correct url ? I went and looked lots of places. Can someone point me to the exact link ?
Edit :
Problem once you go to http://download.eclipse.org/releases/indigo , you will see the below error. So I guess its moved somewhere.
This software repository URL, http://download.eclipse.org/releases/indigo/ , provides access to the software repository for the Eclipse indigo release. Until its released in June 2011, it will contain milestone builds.
The repository site URL is typically pre-populated in the list of software repositories when you install the Eclipse Platform or SDK.
For more information about installing or updating software, see the Eclipse Platform Help.
There is also a collection of handy, downloadable all-in-one zip files available for many interests and platforms. Many people find these all-in-one packages the easiest way to get started.
Can you connect to internet at all through Eclipse?
Open the internal webbrowser. In Eclipse: Window -> show view -> Other -> General: Internal web browser.
Look up any normal adress, is it working?
Can you connect to another update site? Try for example Eclipse Emma:
http://update.eclemma.org/
Do you see anything there?
What are your proxy preferences? Go to Window -> preferences -> General: Network connections.
The active provider:
Specifies the settings profile to be used when opening connections. Choosing the Direct provider causes all the connections to be opened without the use of a proxy server. Selecting Manual causes settings defined in Eclipse to be used. On some platforms there is also a Native provider available, selecting this one causes settings that were discovered in the OS to be used.
If internet is working fine outside of Eclipse, try changing to Native. After that, try Direct.
I have encountered problems where an update site would not load, then I had to remove it and add it again. This forces Eclipse to reread the contents of the site even if it has a cached copy. So, if you still get no connection to the indigo update site, but everything else is working, try that. Go to Window -> Preferences -> Install/update: Available Software sites. Then remove and add the indigo site. Just remember to copy the adress so you can add it again.
As suggested in a comment below by #lostiniceland, this is a simpler way to achieve the above:
Goto Window -> Preferences -> Install Update -> Available Software Sites => select the entry and click the "Reload" button to the right. This is sometimes also helpful when you have a local updatesite for testing custom plugins
I had the same problem and resolved it by
Deleting the cache directory \eclipse\p2\org.eclipse.equinox.p2.repository\cache
Refreshing the repositories.
Preferences -> Install Update -> Available Software Sites => select the entry
Click the "Reload"
Check if you are able to connect to eclipse market place url (http://marketplace.eclipse.org/) from browser. If its working then the issue is because of proxy server using in your network.
We have to update eclipse with proxy server details used in our network.
Go to :- Windows-> Preference -> General -> Network Connections.
And edit HTTP ,with proxy details.
Click OK
Done.
I was having this problem and it turned out to be our firewall. It has some very general functions for blocking ActiveX, Java, etc., and the Java functionality was blocking the jar downloads as Eclipse attempted them.
The firewall was returning an html page explaining that the content was blocked, which of course went unseen. Thank goodness for Wireshark :)
Another way to solve this kind of error is to start eclipse with this argument
-vmargs -Djava.net.preferIPv4Stack=true
Working fine with Eclipse (x64) 4.3.1
Had this problem in Linux, and I found that the user doesn't have permission to update the eclipse directory
change the owner of eclipse folder recursively, or run eclipse with user who has write permission to the folder
In Windows 7 32-bit version, I started the eclipse with as an administrator. This worked for me.
I had the same problem. Try to deactivate your Firewall (I had avast!), which worked for me.
(Sorry for my English I'm French :D)
Please make sure you are using correct url. If You are using url - http://download.eclipse.org/releases/indigo on your eclipse luna(v4.4) then it might be not working in this case you should use - http://download.eclipse.org/releases/luna
I have tried this and its working.
What worked for me:
Since yesterday, I have been trying to install the Eclipse plugin - "Remote System Explorer" from the Eclipse marketplace on a freshly downloaded Eclipse 4.8 as shown below,
and everytime I was getting this error:
Unable to read repository at http://download.eclipse.org/releases/kepler/.
Unable to read repository at http://download.eclipse.org/releases/kepler/201306260900/content.jar.
download.eclipse.org:80 failed to respond
which brought me to this SO post.
I tried a few solutions mentioned here in the different answers like this one and this one and this one, but none of them worked. I just gave up almost, thinking that either the corporate network here is somehow blocking the specific download requests or the 4.8 version of Eclipse is buggy.
Discovery:
I could not reload all the paths under 'Window' -> 'Preferences' -> 'Install/Update' -> 'Available Software Sites'.
Preconditions:
What did work for me from the beginning was:
I could open google.com from the internal web browser of eclipse and,
some of the update paths, I could reload even. (As was mentioned as a possible solution or test, in some of the answers here, like this one.)
Finally, this answer put me on the right track - for my specific case, at least. Just my step was to do the exact opposite of what that answer was doing.
Solution:
I had to change all the http:\\ paths to https:\\ and suddenly it started to work. I don't know who - either IE/Edge on Windows 10 or the Windows 10 firewall or the company firewall is blocking HTTP communications. But with HTTPS, I can finally install plugins from the Marketplace.
HTTPS reload works
I must say, what is strange is that not all the paths required https. Except a few, the rest seemed to have had no problem working with HTTP. But I anyways changed all to HTTPS, just for good measure.
Then reload all the repositories one by one. Press "Apply and close".
Then check for updates. Eclipse will update itself successfully now.
Restart after update.
Finally you can install whichever Plugin you would like to from the Eclipse Marketplace.
Note: In case during the update, this same error pops up again, then see in the repositories that any new paths added by eclipse during the update, are also HTTPS and not HTTP.
Kudos to #Fredrik above. His answer didn't work for me, but lead me to the resolution of my issue:
In 'Window'|'Preferences'|'Install/Update'|'Available Software Sites'. The location that I was attempting to install from the 'Marketplace' was getting inserted with an https:// URL. Editing this to http:// allowed me to then use 'Help'|Install New Software ...' to select the repository from the drop down 'Work with:' combobox instead of having the https:// one automatically inserted and used.
For eclipse, there are normally different options available:
If you want to use the PHP development environment (only), you should go with the corresponding distro of eclipse. There is a distro for PHP provided by Zend.
You may add PDT to an indigo release by doing the following steps:
Check if an update site for PDT is included in your eclipse installation:
Open the Help > Install New Software dialog.
Click there on the link Available Software Sites.
In the list, the URL http://download.eclipse.org/releases/indigo should be marked.
Close the dialog.
Select from the Work with list the site with the right URL.
Enter in the filter box PDT and search in the list for the PDT tooling you want to install.
Install the PDT tooling.
If that does not work, you may download a complete update site from the PDT project site.
Visit the site (URL above).
Click on downloads.
Search there for the string "all in one update site".
Download the zip file.
Install it in your Indigo installation. Help > Install New Software > Add... > Enter name and select from button Archive the zip file
I hope some of the installation instructions will work for you.
This is the correct URL. Chances are Eclipse cannot read it properly because of the Internet connexion.
Are you using a proxy to get Internet access? If this is the case you need to notify Eclipse via the "Preferences/General/Network Connections" menu.
That URL works fine. The message you report is normal when you look at it in a browser. My copy of Eclipse has no problems talking to it. If yours does, I suspect a proxy configuration error in your copy of eclipse.
Also try it by turning off the firewall, and similar services. It worked for me!
If you can't access https://dl-ssl.google.com/android/eclipse/ simply
try to use http://
instead of https://
I spent whole my day figuring out this and found the following. And it works great now.
This is basically an issue with your gateway or proxy, If you are under proxy network, Please go to the network settings and set the proxy server settings(server, port , user name and password). If you are under direct gateway network, your firewall may be blocking the http get request from your eclipse.
I was also unable to read the repository. Even after the disabling most of the entries under Available Software Sites things were still not working.
I had no proxy to worry about and even disabling the firewall (which I do not recommended) as a last resort did not help.
Viewing the error log, from the dialog box which Eclipse displayed, there was mention of a cache directory under .eclipse in my home directory. I deleted the two cache directories I found and Eclipse was working again.
For my setup the two directories I deleted were:
.eclipse/org.eclipse.platform_4.4.2_119745494_macosx_cocoa_x86_64/p2/org.eclipse.equinox.p2.core/cache
.eclipse/org.eclipse.platform_4.4.2_119745494_macosx_cocoa_x86_64/p2/org.eclipse.equinox.p2.repository/cache
NB: My setup is Eclipse Luna 4.4.2 running on Mac OS X Yosemite 10.10.3
In my case, I discovered that the major issue why my eclipse won't connect to internet is my Internet Service Provider. I was only able to browse some websites but unable to browse other website. Fixing the issue with the ISP worked.
My issue was the Eclipse Marketplace client needed updating.
After trying Fredriks solution of
Go to Window -> Preferences -> Install/update: Available Software sites. Then remove and add the indigo site. Just remember to copy the adress so you can add it again.
The Marketplace client wouldn't load. But I could access it via a browser.
So, I went to the Help -> Eclipse Marketplace
it loaded fine
Clicked on Installed and found the Eclipse Marketplace Client and it had so i clicked it it updated and then when I did the standard update everything worked.
Sometimes, there will be firewalls and restrictions in the network preventing the plugin to get downloaded. We can try some other network. This actually resolved my issue.
I was facing the issue while adding team explorer plugin to eclipse from https://marketplace.eclipse.org/content/team-explorer-everywhere.
Used team explorer plugin for ecplise for internal use of xamarin for mac.
Error:
unable to read repository at http://marketplace.eclipse.org/content/team-explorer-everywhere
org.eclipse.equinox.p2.core.provisionexception unable to read repository
Unknown host exception
Goto https://github.com/microsoft/team-explorer-everywhere/releases
Download: TFSEclipsePlugin-UpdateSiteArchive-14.135.0.zip
From Eclipse->Help->Install new software.
From Add Repository window select Archive select the downloaded zip file.
Continue installation.
Also try if in the eclipse paths there is some duplicated
Luna - http://download.eclipse.org/releases/luna
Luna - http://download.eclipse.org/releases/luna/1234567...
Try both of them, one may work.
In my case, with 2 eclispes installed, in one of them the path
Luna - http://download.eclipse.org/releases/luna
works, in the other one, i must select:
Luna - http://download.eclipse.org/releases/luna/123456...
In both the internal browser can access to internet. Both are Luna (but one is RCM, the other one i don't remember).
No meu caso era o anti-vírus que estava bloqueando a conexão do eclipse, desativei o anti-víruse tudo funcionou o//.
Translation:
In my case it was the anti-virus that was blocking the connection from eclipse. I disabled the anti-virus and everything worked.