I am not a scripter at all. Someone else had created this script for me and it has previously worked. The only thing that has changed is the drive letter (which I did change in the script - it is currently drive E). But it is not working now. All it is supposed to do is pull back a list of files in a specified folder and save it as a text file in that directory; in this case, it's my karaoke song collection.
When I run the script now, I get:
Get-Process : A positional parameter cannot be found that accepts argument Get-ChildItem.
Here is the original script:
PS C:\Users\Tina> Get-ChildItem "F:\My Music\Karaoke\*.*" | Set-Content "F:\My Music\Karaoke\test.txt"
I'd like to make it so that it just pulls back all .mp3's, if that's possible, too. Thanks in advance for your help!
Since you appear to be copying and pasting this to the command line I will assume there was a typo that caused this issue. After a couple of quick tests to try and guess what the accident was I was unable to replicate exactly. Not being a scripter might make this harder but I recommend saving this code to a ps1 file so that you can just double click on it.
Get-ChildItem "F:\My Music\Karaoke\*.mp3" | Set-Content "F:\My Music\Karaoke\test.txt"
Warning
In order for the this file to work for you you have to allow PowerShell to execute it. If you run the shell as administrator once and run this code
Set-ExecutionPolicy remotesigned
It will allow your script to run. Keep in mind this is a site for scripters to get help. You should expect answers like this.
Related
I encountered a challenge that I failed to resolve the way I wanted it to do.
I got a file that contains a powershell script, but that file does not have the extension assigned to powershell. The question is: How can I execute a powershell in a script file with the wrong file extension (or none)?
Invoke-Expression does not seem to work because it always executes the default action assigned to the file type. If I give that cmdlet a *.txt file the editor pops open.
I know that I can resolve that by renaming the script file or naming it properly in the first place. This is what I ended up doing.
Still I wonder if it is possible to execute a file as a script with the wrong file extension without modifying, renaming or coping the file. And if it is not working… why is that?
Powershell is designed such that executing or dot sourcing a file requires a .ps1 extension, and Powershell.exe will refuse to run any file that doesn't have that extension.
One way to invoke Powershell code from a non-ps1 file is to launch Powershell.exe using STDIN, and pipe your script to it. This requires a new shell, so is not very good for launching scripts from within an existing scripting environment.
Powershell.exe - < thescript.txt
Another way is to create a temporary .ps1 file and execute that. This has the advantage of using the current scripting environment, but requires a temporary file.
Copy-Item -Path '.\thescript.txt' -Dest '.\temp.ps1'
. .\temp.ps1
del .\temp.ps1
In my opinion, the file extension restriction is silly, but that's how it was designed. Apocryphally, this is for security reasons, but I can find no citation to back it up.
Or you use Get-Content to read the file and then invoke that with Invoke-Expression or Invoke-Command -ScriptBlock.
Powershell is clearly a lot better than cmd but it hides basic functionality. I normally use it to figure out how to use commands that I want in scripts but it breaks a large number of basic things and I end up using both side by side if I hit a sticky spot.
Today this was removing a directory - rd or rmdir - both of which are broken in powershell in favour of one it's undocumented (from the commandline) cmdlets Remove-Item. I seem to run into it all the time though - sc (for mucking around with services); where for finding what program is being called when you type a command etc etc.
Hilariously I actually got the problem with sc and then googled to find out the command where only to discover that didnt work in powershell either! That was a confusing day
In some cases once you know this is what's going on you can type the full exe name (for instance 'where.exe' will work whereas 'where' on its own wont).
This isn't the case with rmdir however. Although interestingly typing 'where rmdir' in cmd doesnt work.
So... my question is this - Is there a way of turning off (preferably all) cmdlets in powershell and just getting the normal stuff instead?
There is no need to turn off cmdlets in powershell as that would destroy the very reason for having it.
Most of the "normal" stuff is there anyway, which you can find by using the get-alias command.
C:\> get-alias
CommandType Name
----------- ----
Alias % -> ForEach-Object
Alias ? -> Where-Object
Alias ?? -> Invoke-NullCoalescing
Alias ac -> Add-Content
Alias asnp -> Add-PSSnapin
Alias cat -> Get-Content
Alias cd -> Set-Location
Alias chdir -> Set-Location
.....
..... AND A WHOLE LOT MORE!
If you are missing a command that you really, really want to have, then you can easily add a new alias:
Set-Alias python2 "C:\Python27\python.exe"
In order to avoid having to do this every single time, you can simply add this into your startup profile. Just type in $PROFILE into the command prompt and it will show you the file path. If it doesn't exist, simply create it, and any powershell commands you add to the top will be automatically invoked when you start a new session.
And last thing. All of the commands are documented, and you can get to them easily using just two.
Just type this into your command prompt and you will be on your way to Powershell enlightenment!
get-help get-command
get-command -noun Item
get-command -verb get
I just realised the answer to my question was buried in the comments to the other answer:
To remove a cmdlet in powershell you run
Remove-Item alias:something.
I can confirm you can do this by using the profile mentioned in Josh's post, however there are a couple more steps:
By default you cant run scripts in powershell. You have to change this using set-ExecutionPolicy.
I changed this by using an admin powershell and typing
set-executionpolicy bypass
This will let you run any script you like
Then in my profile script I have lines like:
Remove-Item -force alias:sc
You wont see errors from this script when it runs and it wont do anything unless you have force.
I'm writing a powershell cmdlet. From inside of my cmdlet BeginProcessing() method, I want to be able to retrieve the the directory that was the default directory at the time the cmdlet was invoked.
Example:
If the user does this:
cd \myDirectory
invoke-mycmdlet
I want for my code to know that the default shell directory was c:\myDirectory.
When I access Environment.CurrentDirectory, it's always c:\windows\system32
I've seen a similar post on SO where the poster needed to set Environment::Current directory from inside the shell using get-location. That won't work for me.
Basically, my cmdlet does some file system stuff, and I want the user to be able to just cd\ into a directory, and execute my cmdlet, with it operating on the directory that they switched into -- just like you would expect it to work from the old Command Console.
You might want to try this instead, CurrentLocation.Path could also point to other provider paths, such as the registery.
this.SessionState.Path.CurrentFileSystemLocation.Path
You know, I always seem to find it right after I post -- regardless of how long I spent looking before reaching for SO!
So, my cmdlet inherits from PsCmdlet. I found that I could get the path I wanted from
this.SessionState.Path.CurrentLocation.Path
(where "this" is a cmdlet class that inherits from PsCmdlet)
Try the Get-Location cmdlet. It should be the script's current executing location, rather than the powershell host startup folder.
I’m in the process of creating a powershell script to check OU users against users already configured for file share archiving but I’ve hit a stumbling block. I can query AD to get a list of users per OU and their home directories, dumping all of the details out to text files for logs and basing subsequent queries on. Once I have these details I try to run a dos command, (Enterprise Vault) Archivepoints.exe passing variables to it. The command would usually be :
Archivepoints.exe find \\fopserver045v\ouone_users$
When I try to run the following code I get an error.
$app="D:\Enterprise Vault\ArchivePoints.exe"
$EVArg = "find"
$VolLine = "\\fopserver045v\ouone_users_r$"
Invoke-Item "$app $EVArg $VolLine"
Invoke-Item : Cannot find path 'D:\Enterprise Vault\ArchivePoints.exe find \fopserver045v\ouone_users_r$' because it does not exist.
At first I thought it was missing the first backslash of the UNC path that was causing the issue but I'm no longer sure.
The script and command run on the EV server and the UNC bath doesn't actually go to the server, it's only a reference path within EV so it's not a credentials issue.
I need to be able to log the output to file too if possible.
What should the code look like and should I be using invoke-command or Invoke-Expression instead ?
Thanks
Don't use Invoke-Item. External commands should be run using the call operator (&). You can use splatting for the argument list.
$app="D:\Enterprise Vault\ArchivePoints.exe"
$arguments = "find", "\\fopserver045v\ouone_users_r$"
& $app #arguments
myscript.ps1
Param(
[Parameter(Mandatory=$true,Position=1)]
[string]$computerName
)
echo "arg0: " $computerName
CMD.exe
C:\> myscript.ps1 -computerName hey
Output:
cmdlet myscript.ps1 at command pipeline position 1
Supply values for the following parameters:
computerName: ddd
arg0:
ddd
I'm simply trying to work with Powershell parameters in CMD, and I can't seem to get a script to take one. I see sites saying to precede the script with .\ but that doesn't help. I added the mandatory line to see if Powershell was reading a parameter or not, and it's clearly not. The parameter computerName is obviously the word "hey". The Param block is the very first thing in the script. Powershell appears to recognize a parameter computerName, but no matter how I enter the command, it never thinks I'm actually entering parameter.
What the heck's wrong with my syntax?
By default, Powershell will not run scripts that it just happens to find in your current directory. This is intended by Microsoft as a security feature, and I believe that it mimics behavior found in unix shells.
Powershell will run scripts that it finds in your search path. Your search path is stored in $env:path.
I suspect that you have a script named "myscript.ps1" in some other directory that is on your search path.
I have had this happen to me before. The symptom I saw was that the parameter list seemed different than what I had defined. Each script had a different parameter list, so the script bombed when I fed it a parameter list intended for the other script. My habit is to not rely on parameter position, so this problem was easy to find.
The addition of ".\" to the script ".\myscript.ps1" should force the shell to use the .ps1 file in your current directory. As a test, I would specify the full path to the file you are trying to execute (If there are spaces in the path, be sure to wrap the path in "quotes") or change it to some totally crazy name that won't be duplicated by some other file (like "crazyfishpants.ps1") and see if the shell still finds the file.
You can get into similar problems if you have a function ("Get-Foo") that is loaded out of a module or profile with the same name as a script file ("Get-Foo.ps1"). You may wind up running something other than what you intend.
Position values should be 0-based (0 for the first parameter). That said, I can't duplicate what you're seeing on either PowerShell 2.0 or 3.0.
Thank you all for your very informative responses. It looks like my question was slightly edited before I submitted it, in that the text leads you to believe that I was entering this command directly in Powershell.
I was actually running the command for the script in CMD, which totally explains why it was not passing parameters to the Powershell script. Whoever green-lighted my question probably changed C:\> to PS> thinking that I made a typo.
I assumed that if I could run the script straight from CMD, I could send parameters to it on CMD's command line, but apparently that's not the case. If I run the script in Powershell, it indeed works just fine, I'm now seeing.
My ultimate goal was to allow users to run the Powershell script from CMD. It's looking like I can make a batch file that accepts parameters, and then start powershell and send those parameters to the PS script. And so, in the batch file, I should do something like:
powershell -File C:\myscript.ps -computerName %1
This enigma was probably solved 100 times over on this site, and I apologize for the confusion. Thank you again, for your responses.