I'm new to jmeter. I have the .jmx file containg a http samplers and a view result `tree.CommandLine.jmx is the name of my testplan. I executed jmeter through command line using
jmeter -n -t CommandLine.jmx -l resultfile.jtl.
the resultfile.jlt is created but it doesn't contain anything.
So what is the problem with my resultfile?
Better user aggregate report given by JMeter. Then you don't have to worry about storing result file manually.
It works fine with below script
C:\apache-jmeter-4.0\apache-jmeter-4.0\bin>jmeter -n -t C:\apache-jmeter-4.0\apache-jmeter-4.0\bin\examples\Post_call_24_FirstStep_10.jmx -l C:\apache-jmeter-4.0\apache-jmeter-4.0\bin\examples\resultfile.jtl
need to provide the path for .jtl file and remove . at the end. Need some correction in below sript
jmeter -n -t CommandLine.jmx -l resultfile.jtl.
Please try with below command. Please find JMeter complete tutorial
jmeter -n –t Your-JMX-file.jmx -l test-results.jtl
Related
I am running a jenkins pipeline with the following command:
kubectl exec -it kafkacat-5f8fcfcc57-2txhc -- kafkacat -b cord-kafka -C -t BBSim-OLT-0-Events -o s#1585031458
which is running fine on the terminal of the machine the pipeline is running on, but on the actual pipeline I get the following error: "Unable to use a TTY - input is not a terminal or the right kind of file"
Any tips on how to go about resolving this?
When the flags -it are used with kubectl exec, it enables the TTY interactive mode. Given the error that you mentioned, it seems that Jenkins doesn't allocate a TTY.
Since you are running the command in a Jenkins job, I would assume that your command is not necessarily interactive. A possible solution for the problem would be to simply remove the -t flag and try to execute the following instead:
kubectl exec -i kafkacat-5f8fcfcc57-2txhc -- kafkacat -b cord-kafka -C -t BBSim-OLT-0-Events -o s#1585031458
For windows git bash:
alias kubectl='winpty kubectl'
$ kubectl exec -it <container>
Or just use winpty before the desired command.
For Windows GitBash users, use Powershell and NOT GitBash
Remove the -t option. That requests a TTY, which as you noted does not exist in Jenkins.
Just a hint for anyone that gets stuck like I did with kafkacat suddenly returning no data after removing the -t.
Turns out if there's no tty then kafkacat defaults to Producer mode, I never used the -C flag because it's the default to be a Consumer, but in this case it's required.
I have a pod running python image as 199 user. My code app.py is place in /tmp/ directory, Now when I run copy command to replace the running app.py then the command simply fails with file exists error.
Please try to use the --no-preserve=true flag with kubectl cp command. It will pass --no-same-owner and --no-same-permissions flags to the tar utility while extracting the copied file in the container.
GNU tar manual suggests to use --skip-old-files or --overwrite flag to tar --extract command, to avoid error message you encountered, but to my knowledge, there is no way to add this optional argument to kubectl cp.
I'm using scpg3 command to copy file from local server to a remote server. My command is as below:
scpg3 <filename> user#remotehost:/tmp
My question is: how to get the result from this command. I want to move it to backup folder after copy successfully. Thanks
There is a verbose directly. You can use that:
scpg3 -v, --verbose
in your case,
scpg3 -v <filename> user#remotehost:/tmp
Uses verbose mode which is equal to -D 2. -D only applies on Unix. On Windows, instead of this command line tool, use the Connection Broker debugging options -D, -l.
D is the Debug level.
Hope it helps.
I need to copy xml file from server to my folder and name it as daily.xml. Here is my code.
The problem is that every new file has name daily.xml.1, daily.xml.2 etc
How to name new file as daily.xml, and previous file as previous-daily.xml? As I know I need to use -O but I don't understand how to use it
wget -P /home/name/name2/docs/xml/ http://www.domain.com/XML/daily.xml
How to make correct request?
What about
wget -P /home/name/name2/docs/xml/ http://www.domain.com/XML/daily.xml -O daily$(date +'%Y%m%d%H%M%S').xml
Maybe the resolution by seconds is not fine enough and you need to have a count variable.
This dose not, however, rename your previous files.
In case your only original problem was the your system does not recognize *.xml.7 as xml-file, the command above should fix this.
Edit: as for your comment, you could do
mv daily.xml previous-daily.xml;wget -P /home/name/name2/docs/xml/ http://www.domain.com/XML/daily.xml -O daily.xml
I am new to jmeter. I have the .jmx file containg all the required http samplers. I could run it throught the Jmeter UI using "Run-> Start" and view the result in the "Summary Report". I can then save the results to the .csv using "Save Table Data" button in "Summary Report".
Question is how can I achieve the same using command line.
JMeter can be launched in non-GUI mode as follows:
jmeter -n -t /path/to/your/test.jmx -l /path/to/results/file.jtl
You can set what would you like to see in result jtl file via playing with JMeter Properties.
See jmeter.properties file under /bin folder of your JMeter installation and look for those starting with
jmeter.save.saveservice.
Defaults are listed below:
#jmeter.save.saveservice.output_format=csv
#jmeter.save.saveservice.assertion_results_failure_message=false
#jmeter.save.saveservice.assertion_results=none
#jmeter.save.saveservice.data_type=true
#jmeter.save.saveservice.label=true
#jmeter.save.saveservice.response_code=true
#jmeter.save.saveservice.response_data=false
#jmeter.save.saveservice.response_data.on_error=false
#jmeter.save.saveservice.response_message=true
#jmeter.save.saveservice.successful=true
#jmeter.save.saveservice.thread_name=true
#jmeter.save.saveservice.time=true
#jmeter.save.saveservice.subresults=true
#jmeter.save.saveservice.assertions=true
#jmeter.save.saveservice.latency=true
#jmeter.save.saveservice.samplerData=false
#jmeter.save.saveservice.responseHeaders=false
#jmeter.save.saveservice.requestHeaders=false
#jmeter.save.saveservice.encoding=false
#jmeter.save.saveservice.bytes=true
#jmeter.save.saveservice.url=false
#jmeter.save.saveservice.filename=false
#jmeter.save.saveservice.hostname=false
#jmeter.save.saveservice.thread_counts=false
#jmeter.save.saveservice.sample_count=false
#jmeter.save.saveservice.idle_time=false
#jmeter.save.saveservice.timestamp_format=ms
#jmeter.save.saveservice.timestamp_format=yyyy/MM/dd HH:mm:ss.SSS
#jmeter.save.saveservice.default_delimiter=,
#jmeter.save.saveservice.default_delimiter=\t
#jmeter.save.saveservice.print_field_names=false
#jmeter.save.saveservice.xml_pi=<?xml-stylesheet type="text/xsl" href="../extras/jmeter-results-detail-report_21.xsl"?>
#jmeter.save.saveservice.base_prefix=~/
#jmeter.save.saveservice.autoflush=false
Uncomment the one you are interested in and set it's value to change the default. Another option is override property in user.properties file or provide it as a command-line argument using -J key as follows:
jmeter -Jjmeter.save.saveservice.print_field_names=true -n /path/to/your/test.jmx -l /path/to/results/file.jtl
See Apache JMeter Properties Customization Guide for more details on what can be done using JMeter Properties.
You can use this command,
jmeter -n -t /path to the script.jmx -l /path to save results with file name file.jtl
But if you really want to run a load test in a remote machine, you should be able to make it run eventhough you close the window. So we can use nohup to ignore the HUP (hangup) signal. So you can use this command as below.
nohup sh jmeter.sh -n -t /path to the script.jmx -l /path to save results with file name file.jtl &
You can run JMeter from the command line using the -n parameter for 'Non-GUI' and the -t parameter for the test plan file.
jmeter -n -t "PATHTOJMXFILE"
If you want to further customize the command line experience, I would direct you to the 'Getting Started' section of their documentation.
This worked for me on mac os High sierra 10.13.6, java 8 64-bit, jmeter 4.0
$ jmeter -n --testfile /path/to/Test_Plan.jmx
Sample output:
Creating summariser <summary>
Created the tree successfully using ./src/test/jmeter/Test_Plan.jmx
Starting the test # Fri Aug 24 17:18:18 PDT 2018 (1535156298333)
Waiting for possible Shutdown/StopTestNow/Heapdump message on port 4445
summary = 10 in 00:00:09 = 1.1/s Avg: 6666 Min: 1000 Max: 8950 Err:
0 (0.00%)
Tidying up ... # Fri Aug 24 17:18:28 PDT 2018 (1535156308049)
... end of run
To get the results in excel like file, you have one option to get it done with csv file.
Use below commands with provided options.
jmeter -n -t /path-to-jmeter-test/file.jmx -l TestResults.csv
-n states Non GUI mode
-t states Test JMX File
-l state Log the results in provided file
Also you can pass any results related parameters dynamically in command line arguments using -Jprop.name=value which are already defined in jmeter.properties in bin folder.
This would be the command line statement.
"%JMETER_HOME%\bin\jmeter.bat" -n -t <jmx test file path> -l <csv result file path> -Djmeter.save.saveservice.output_format=csv
In Command line mode:
I have planned on Linux OS.
download the latest jmeter version. Apache JMeter 3.2 (Requires Java 8 or later) as of now.
Extract in your desired directory. For example, extract to /tmp/
Now, default output file format will be csv. No need to change anything or specify in the CLI command.
for example:
./jmeter -n -t examples/test.jmx -l examples/output.csv
For changing the default format, change the following parameter in jmeter.properties : jmeter.save.saveservice.output_format=xml
Now if you run the command : ./jmeter -n -t examples/test.jmx -l examples/output.jtl
output get stored in xml format.
Now, make the request on multiple server(Additional info query): We can specify
host and port as tags in
./jmeter -n -t examples/test.jmx -l examples/output.jtl -JHOST=<HOST> -JPORT=<PORT>
Check my powershell command
$Date = Get-Date -Format ddMMyyyyhhmmss
jmeter -n -t jmetter\dev.jmx -l jmetter\TestResult-$Date.csv -o jmetter\Results-$Date\ -X
// For to know all parameter (like -n, -t, ...), use this command:
jmeter --?
Running JMeter in command line mode:
1.Navigate to JMeter’s bin directory
Now enter following command,
jmeter -n –t test.jmx
-n: specifies JMeter is to run in non-gui mode
-t: specifies name of JMX file that contains the Test Plan