I have powershell code to create a task that "ghosts" a harddrive using ghost.exe. I need to create a single task that first runs ghost.exe with all my parameters, then after it is finished, runs the next action that will verify the image using a powershell script.
The trick is telling the task to wait until the backup is created, then run the verify. In my attempts, it starts the backup then immediately tries to verify. How can I do this?
Line:
cmd /c schtasks /Create /RU 'SYSTEM' /SC once /TN hotghost /SD $startdate
/ST $starttime /TR $hotghosttask
/TR is "task to run" but I cannot add another /TR to add another action.
If it's an existing item that you're waiting on a change for and your roughly know how long the "ghost" usually takes, a simple solution would be to just build a control in the PowerShell-script that will be run afterwards, to wait for a new LastWriteTime on the image. In the below example, when the $temp.LastWriteTime matches the current month, day, year and hour, the script will continue.
See the below example:
$Date = Get-Date -Format "MM-dd-yyyy hh:"
do {
$temp = Get-Item C:\temp\temp.txt
}
until($temp.LastWriteTime.ToString("MM-dd-yyyy hh:") -eq $date)
Write-Host "Starting image verification..."
[your code begins here]
Another alternative would be to create a temp-file that's generated after the first task has been completed and just use a do/until loop until the statement is true.
do {
$temp = Test-Path C:\temp\temp.txt
}
until($temp -eq $true)
I'm trying to create scheduled task for Windows reboot, which is executed if any user is not logged in. If user is logged in locally or over RDP, the machine should not be restarted.
For unconditional restart, I have task in Task Scheduler with:
Action: "Start a program", Program/script: "powershell", Add arguments: "restart-computer -force"
For conditional restart I have powershell code:
$ErrorActionPreference = "Continue"
$userstatus = quser /server:'localhost'
if(!$userstatus){
Restart-Computer -Force
}
else{
exit
}
I can get the conditional restart working fine when I save the script as .ps1 file and add the filepath to the schedule as argument. I need the conditional restart with several desktops and I would like to avoid saving the .ps1 file locally for each machine. Is it possible to pass the entire script as argument?
Your logic's a bit off. If you plan on creating the scheduled task for each PC, it should look something like this:
$Users = quser.exe
If ($Users -match 'No\sUser') { Restart-Computer -Force }
From here, because of the syntax, you should encode it, then you could utilize schtasks.exe to create your task:
[Convert]::ToBase64String(
[Text.Encoding]::Unicode.GetBytes(
"If(#(quser.exe) -match 'no\suser'){Restart-Computer -Force}"
)
)
Output:
SQBmACAAKABAACgAcQB1AHMAZQByAC4AZQB4AGUAKQAgAC0AbQBhAHQAYwBoACAAJwBuAG8AXABzAHUAcwBlAHIAJwApAHsAUgBlAHMAdABhAHIAdAAtAEMAbwBtAHAAdQB0AGUAcgAgAC0ARgBvAHIAYwBlAH0A
schtasks.exe /Create /TN AutoRestart /SC DAILY /ST 20:00 /RU SYSTEM /TR "powershell.exe -EncodedCommand SQBmACAAKABAACgAcQB1AHMAZQByAC4AZQB4AGUAKQAgAC0AbQBhAHQAYwBoACAAJwBuAG8AXABzAHUAcwBlAHIAJwApAHsAUgBlAHMAdABhAHIAdAAtAEMAbwBtAHAAdQB0AGUAcgAgAC0ARgBvAHIAYwBlAH0A"
I'm trying to run powershell script for cleaning disk on agent from Zabbix. Seems that script is running too long and instead response I got error.
powershell -NonInteractive C:\Scripts\CleanDisk.ps1 -deleteLogsOlderThanDays 10
Script deletes some logs and temp folders and prints statistics. If there is only few folders to delete it work fines. But if script runs too long then dialog windows with script result ends with error Get value from agent failed: ZBX_TCP_READ
Guess that it's because connection to client timeout. Is there some way how to get over this limitation?
Thx
My colleagues found usable workaround. Instead of starting script which will run long time it's better to only schedule script with schtask.exe. So I modified script, now it contains two parts. One is responsible for scheduling and starting scheduled task (schedule it self but with different arguments), second heavy and long running does the action. Result of scheduling will appear in execution script dialog box in zabbix, result of long running action is going to log file...
Here is example of powershell script StartCleanDisk.ps1. In this case task will be scheduled and immediately executed by scheduler.
StartCleanDisk.ps1 -deleteLogsOlderThanDays 10 -startAsTask 1
In this case task will directly executed.
StartCleanDisk.ps1 -deleteLogsOlderThanDays 10 -startAsTask 0
StartCleanDisk.ps1 content:
[CmdletBinding()]
param
(
[parameter(Mandatory=$true)]
[int]
$deleteLogsOlderThanDays,
[bool]
$startAsTask = $false
)
if ($startAsTask)
{
Write-Output "Scheduling task for cleaning disk ...";
$taskname = "CleanDisk"
$logFile = "X:\logs\Tasks\cleaningDisk.log";
$task = "powershell $PSScriptRoot\StartCleanDisk.ps1 -deleteLogsOlderThanDays $deleteLogsOlderThanDays -startAsTask 0 > $logFile 2>&1";
& schtasks /create /ru "System" /tn $taskname /tr $task /sc once /ST 23:59 /F /V1 /Z;
Write-Output "Task Clean disk created...";
& schtasks /run /tn $taskname;
Write-Output "Task $taskname started... Please chek $logFile";
exit 0;
}
#####################
# Script begins here
# PUT HERE COMMANDS FOR DELETING
#####################
Start as a hidden process
UserParameter=Key[*],powershell -NoProfile -ExecutionPolicy Bypass Start-Process powershell -ArgumentList \\Path\SYSVOL\..\scripts\Files\Zabbix\Key.$1.ps1 "$2" "$3" -Windowstyle Hidden
Where Key[*] is an active item in Zabbix agent for start powershell at windows host,
$1 for variation of name PowerShell scrips, "$2" "$3" "next" for any parameters
if $1="Ring" then the name of the script will Key.Ring.ps1
I have a PowerShell script that monitors an image folder. I need to find a way to automatically run this script after the computer starts.
I already tried the following methods, but I couldn't get it working.
Use msconfig and add the PowerShell script to startup, but I cannot find the PowerShell script on that list.
Create a shortcut and drop it to startup folder. No luck.
%SystemRoot%\SysWOW64\WindowsPowerShell\v1.0\powershell.exe -File "C:\Doc\Files\FileMonitor.ps1"
or
%SystemRoot%\system32\WindowsPowerShell\v1.0\powershell.exe -File "C:\Doc\Files\FileMonitor.ps1"
Here's my PowerShell script:
$folder = "C:\\Doc\\Files"
$dest = "C:\\Doc\\Files\\images"
$filter = "*.jpg"
$fsw = new-object System.IO.FileSystemWatcher $folder, $filter -Property #{
IncludeSubDirectories=$false
NotifyFilter = [System.IO.NotifyFilters]'FileName, LastWrite'
}
$onCreated = Register-ObjectEvent $fsw Created -SourceIdentifier FileCreated -Action {
Start-Sleep -s 10
Move-Item -Path C:\Doc\Files\*.jpg C:\Doc\Files\images
}
I also tried to add a basic task using taskschd.msc. It is still not working.
Here's what I found, and maybe that will help to debug it.
If I open up a PowerShell window and run the script there, it works. But if I run it in a command prompt,
powershell.exe -File "C:\Doc\Files\FileMonitor.ps1"
It will not work. I am not sure it's a permission problem or something else.
BTW, I have PowerShell 3.0 installed, and if I type $host.version, it will show 3 there. But my powershell.exe seems like it is still v1.0.
%SystemRoot%\system32\WindowsPowerShell\v1.0\powershell.exe
I finally got my PowerShell script to run automatically on every startup. You will need to create two files: the first is the Powershell script (e.g. script.ps1) and the second is a .cmd file that will contain commands that will run on the command prompt (e.g. startup.cmd).
The second file is what needs to be executed when the computer starts up, and simply copy-pasting the .ps1 to the startup folder won't work, because that doesn't actually execute the script - it only opens the file with Notepad. You need to execute the .cmd which itself will execute the .ps1 using PowerShell. Ok, enough babbling and on to the steps:
Create your .ps1 script and place it in a folder. I put it on my desktop for simplicity. The path would look something like this:
%USERPROFILE%\Desktop\script.ps1
Create a .cmd file and place it in
%AppData%\Microsoft\Windows\Start Menu\Programs\Startup\startup.cmd
Doing this will execute the cmd file every time on startup. Here is a link of how to create a .cmd file if you need help.
Open the .cmd file with a text editor and enter the following lines:
PowerShell -Command "Set-ExecutionPolicy Unrestricted" >> "%TEMP%\StartupLog.txt" 2>&1
PowerShell %USERPROFILE%\Desktop\script.ps1 >> "%TEMP%\StartupLog.txt" 2>&1
This will do two things:
Set the Execution Policy of your PowerShell to Unrestricted. This is needed to run scripts or else PowerShell will not do it.
Use PowerShell to execute the .ps1 script found in the path specified.
This code is specifically for PowerShell v1.0. If you're running PowerShell v2.0 it might be a little different. In any case, check this source for the .cmd code.
Save the .cmd file
Now that you have your .ps1 and .cmd files in their respective paths and with the script for each, you are all set.
You could set it up as a Scheduled Task, and set the Task Trigger for "At Startup"
What I do is create a shortcut that I place in shell:startup.
The shortcut has the following:
Target: C:\Windows\System32\WindowsPowerShell\v1.0\powershell.exe -Command "C:\scripts\script.ps1"
(replacing scripts\scripts.ps1 with what you need)
Start In: C:\scripts
(replacing scripts with folder which has your script)
You could create a Scheduler Task that runs automatically on the start, even when the user is not logged in:
schtasks /create /tn "FileMonitor" /sc onstart /delay 0000:30 /rl highest /ru system /tr "powershell.exe -file C:\Doc\Files\FileMonitor.ps1"
Run this command once from a PowerShell as Admin and it will create a schedule task for you. You can list the task like this:
schtasks /Query /TN "FileMonitor" /V /FO List
or delete it
schtasks /Delete /TN "FileMonitor"
This is really just an expansion on #mjolinor simple answer [Use Task Scheduler].
I knew "Task Scheduler" was the correct way, but it took a bit of effort to get it running the way I wanted and thought I'd post my finding for others.
Issues including:
Redirecting output to logs
Hiding the PowerShell window
Note: You must have permission to run script see ExecutionPolicy
Then in Task Scheduler, the most important/tricky part is the Action
It should be Start a Program
Program/Script:
powershell
Add arguments (optional) :
-windowstyle hidden -command full\path\script.ps1 >> "%TEMP%\StartupLog.txt" 2>&1
Note:
If you see -File on the internet, it will work, but understand nothing can be after -File except the File Path, IE: The redirect is taken to be part of the file path and it fails, you must use -command in conjunction with redirect, but you can prepend additional commands/arguments such as -windowstyle hidden to not show PowerShell window.
I had to adjust all Write-Host to Write-Output in my script as well.
Try this: create a shortcut in startup folder and input
PowerShell "& 'PathToFile\script.ps1'"
This is the easiest way.
Prerequisite:
1. Start powershell with the "Run as Administrator" option
2. Enable running unsigned scripts with:
set-executionpolicy remotesigned
3. prepare your powershell script and know its path:
$path = "C:\Users\myname\myscript.ps1"
Steps:
1. setup a trigger, see also New-JobTrigger (PSScheduledJob) - PowerShell | Microsoft Docs
$trigger = New-JobTrigger -AtStartup -RandomDelay 00:00:30
2. register a scheduled job, see also Register-ScheduledJob (PSScheduledJob) - PowerShell | Microsoft Docs
Register-ScheduledJob -Trigger $trigger -FilePath $path -Name MyScheduledJob
you can check it with Get-ScheduledJob -Name MyScheduledJob
3. Reboot Windows (restart /r) and check the result with:
Get-Job -name MyScheduledJob
see also Get-Job (Microsoft.PowerShell.Core) - PowerShell | Microsoft Docs
References:
How to enable execution of PowerShell scripts? - Super User
Use PowerShell to Create Job that Runs at Startup | Scripting Blog
Copy ps1 into this folder, and create it if necessary. It will run at every start-up (before user logon occurs).
C:\Windows\System32\GroupPolicy\Machine\Scripts\Startup
Also it can be done through GPEDIT.msc if available on your OS build (lower level OS maybe not).
Be sure, whenever you want PowerShell to run automatically / in the background / non-interactive, it’s a good idea to specify the parameters
-ExecutionPolicy Bypass to PowerShell.exe
PowerShell.exe -ExecutionPolicy Bypass
I have a script that starts a file system watcher as well, but once the script window is closed the watcher dies. It will run all day if I start it from a powershell window and leave it open, but the minute I close it the script stops doing what it is supposed to.
You need to start the script and have it keep powershell open.
I tried numerous ways to do this, but the one that actually worked was from http://www.methos-it.com/blogs/keep-your-powershell-script-open-when-executed
param ( $Show )
if ( !$Show )
{
PowerShell -NoExit -File $MyInvocation.MyCommand.Path 1
return
}
Pasting that to the top of the script is what made it work.
I start the script from command line with
powershell.exe -noexit -command "& \path\to\script.ps1"
A relatively short path to specifying a Powershell script to execute at startup in Windows could be:
Click the Windows-button (Windows-button + r)
Enter this:
shell:startup
Create a new shortcut by rightclick and in context menu choose menu item: New=>Shortcut
Create a shortcut to your script, e.g:
C:\Windows\System32\WindowsPowerShell\v1.0\powershell.exe -NoProfile -Command "C:\Users\someuser\Documents\WindowsPowerShell\Scripts\somesscript.ps1"
Note the use of -NoProfile
In case you put a lot of initializing in your $profile file, it is inefficient to load this up to just run a Powershell script. The -NoProfile will skip loading your profile file and is smart to specify, if it is not necessary to run it before the Powershell script is to be executed.
Here you see such a shortcut created (.lnk file with a Powershell icon with shortcut glyph):
This worked for me. Created a Scheduled task with below details:
Trigger : At startup
Actions:
Program/script : powershell.exe
Arguments : -file
You can see scripts and more scheduled for startup inside Task Manager in the Startup tab. Here is how to add a new item to the scheduled startup items.
First, open up explorer to shell:startup location via start-button => run:
explorer shell:startup
Right click in that folder and in the context menu select a new shortcut. Enter the following:
C:\Windows\System32\WindowsPowerShell\v1.0\powershell.exe -NoProfile
-Command "C:\myfolder\somescript.ps1"
This will startup a Powershell script without starting up your $profile scripts for faster execution. This will make sure that the powershell script is started up.
The shell:startup folder is in:
$env:APPDATA\Microsoft\Windows
And then into the folder:
Start Menu\Programs\Startup
As usual, Microsoft makes things a bit cumbersome for us when a path contains spaces, so you have to put quotes around the full path or just hit tab inside Powershell to autocomplete in this case.
If you do not want to worry about execution policy, you can use the following and put into a batch script. I use this a lot when having techs at sites run my scripts since half the time they say script didnt work but really it's cause execution policy was undefined our restricted. This will run script even if execution policy would normally block a script to run.
If you want it to run at startup. Then you can place in either shell:startup for a single user or shell:common startup for all users who log into the PC.
cmd.exe /c Powershell.exe -ExecutionPolicy ByPass -File "c:\path\to\script.ps1"
Obviously, making a GPO is your best method if you have a domain and place in Scripts (Startup/Shutdown); under either Computer or User Configurations\Windows Settings\Scripts (Startup/Shutdown).
If you go that way make a directory called Startup or something under **
\\yourdomain.com\netlogon\
and put it there to reference in the GPO. This way you know the DC has rights to execute it. When you browse for the script on the DC you will find it under
C:\Windows\SYSVOL\domain\scripts\Startup\
since this is the local path of netlogon.
Execute PowerShell command below to run the PowerShell script .ps1 through the task scheduler at user login.
Register-ScheduledTask -TaskName "SOME TASKNAME" -Trigger (New-ScheduledTaskTrigger -AtLogon) -Action (New-ScheduledTaskAction -Execute "${Env:WinDir}\System32\WindowsPowerShell\v1.0\powershell.exe" -Argument "-WindowStyle Hidden -Command `"& 'C:\PATH\TO\FILE.ps1'`"") -RunLevel Highest -Force;
-AtLogOn - indicates that a trigger starts a task when a user logs on.
-AtStartup - indicates that a trigger starts a task when the system is started.
-WindowStyle Hidden - don't show PowerShell window at startup. Remove if not required.
-RunLevel Highest - run PowerShell as administrator. Remove if not required.
P.S.
If necessary execute PowerShell command below to enable PowerShell scripts execution.
Set-ExecutionPolicy -Scope LocalMachine -ExecutionPolicy Unrestricted -Force;
Bypass - nothing is blocked and there are no warnings or prompts.
Unrestricted - loads all configuration files and runs all scripts. If you run an unsigned script that was downloaded from the internet, you're prompted for permission before it runs.
I 'm aware that people around here don't need a tool like this. But I think it will be useful especially for novice users. Auto start tool It is a Portable freeware which designed to simplify the process to automatically launch an App or script when you login to Windows. It offers 3 different options for autostart
Task Scheduler
Startup folder
Registry run key
The best part of the tool is supports powershell scripts (.Ps1) . this means that you can run a Powershell script automatically at system startup with all 3 methods.
Download
https://disk.yandex.com.tr/d/dFzyB2Fu4lC-Ww
Source:
https://www.portablefreeware.com/forums/viewtopic.php?f=4&t=25761
One thing I found. if you are using Write-Host within your PowerShell scripts, and are also using Task Scheduler (as shown in the posts above), you don't get all the output from the command line.
powershell.exe -command C:\scripts\script.ps1 >> "C:\scripts\logfile.log"
In my case, I was only seeing output from commands that ran successfully from the PowerShell script.
My conclusion so far is PowerShell uses Out-File to output to another command or in this case a log file.
So if you use *> instead of >> you get all the output from the CLI for your PowerShell script, and you can keep using Write-Host within your script.
powershell.exe -command C:\scripts\script.ps1 *> "C:\scripts\logfile.log"
https://lazyadmin.nl/powershell/output-to-file/
You can also run the script in the background, regardless of user login.
Within your task in Task Scheduler set "Run whether user is logged on or not", and then in the password prompt type your hostname\username then your password (In my case an account with Admin permissions).
I used Set-ExecutionPolicy RemoteSigned -Scope CurrentUser to get around the script execution problem. I still would have preferred to run it on a per-process basis though. A problem for another time.
I scheduled a task on Windows-XP using schtasks utility, but the task does not run. Here is what I see in the SchedLgU.Txt log file:
"MySQL Automatic Backup.job" (WampServer) 10/2/2010 6:36:43 PM ** ERROR **
Unable to start task.
The specific error is:
0x800700c1: (Unable to find an error message)
Try using the Task page Browse button to locate the application.
I found out that the reason for this error is spaces in the path to my script. The command that I used to set up the task look like:
schtasks /create /tn "MySQL Automatic Backup"
/tr "d:\path with spaces to my script\my script.bat" /sc daily ...
If I replace the spaces with underscores, for example, the problem disappears.
How could I solve this problem ?
And another question: What does the Start In column means in the output for schtasks /query /v ?
Thanks !
I found the answer:
Spaces in file paths can be used by using two sets of quotes,
one set for CMD.EXE and one for SchTasks.exe.
The outer quotes for CMD need to be double quotes;
the inner quotes can be single quotes or escaped double quotes.
i.e. it should be like this:
schtasks /create /tn "MySQL Automatic Backup"
/tr "\"d:\path with spaces to my script\my script.bat\"" /sc daily ...