I have a powershell script and a bat file that launches it. I want the bat file to open powershell, then have powershell start another shell with elevated privileges, then run two commands. First command is change directory, second command is start a powershell script.
So far I have this:
powershell -NoProfile -ExecutionPolicy ByPass -Command "& {Start-Process PowerShell -Verb RunAs -ArgumentList '-NoExit -NoProfile -ExecutionPolicy Bypass cd %~dp0 .\App\Deploy-Application.ps1}'"
This is the section I'm having problems with:
cd %~dp0 .\App\Deploy-Application.ps1
I want to run these two commands but I'm not sure how. It runs a single command. I tried adding a semicolon between the commands but it didn't work.
Made a quick test and this is what i got working:
Test.bat
cd %~dp0
powershell -NoProfile -Command ".\test.ps1"
Test.ps1
If (-NOT ([Security.Principal.WindowsPrincipal][Security.Principal.WindowsIdentity]::GetCurrent()).IsInRole([Security.Principal.WindowsBuiltInRole] "Administrator"))
{
$arguments = "-noprofile & '" + $myinvocation.mycommand.definition + "'"
Start-Process powershell -Verb runAs -ArgumentList $arguments
Break
}
Write-Host "Rawr"
Pause
If i run the batch file, it opens the powershell script that then checks if the current window is being run as an administrator and if not, reopens the script as an administrator.
After which it displays Rawr on my screen.
In your case instead of the Write-Host you could put
If (-NOT ([Security.Principal.WindowsPrincipal][Security.Principal.WindowsIdentity]::GetCurrent()).IsInRole([Security.Principal.WindowsBuiltInRole] "Administrator"))
{
$arguments = "-noprofile & '" + $myinvocation.mycommand.definition + "'"
Start-Process powershell -Verb runAs -ArgumentList $arguments
Break
}
cd <Your directory to change to here>
<run command here>
Pause
Related
I am attempting to execute a Powershell Start-Process command with a named parameter list from a Windows command script. I tried including the named parameters;(-productname, -platform, -version, -exepath, -exe, -installMode) in the ArgumentList, however, they when the PowerShell process starts it appears to fail to see them. The command I am using is below:
PowerShell -NoProfile -ExecutionPolicy Bypass -Command "& {Start-Process PowerShell -ArgumentList '-NoProfile -ExecutionPolicy Bypass -File ""setadminstartandcreateshortcut.ps1"" -productname %PRODUCTNAME% -platform %PLATFORM% -version %VERSION% -exepath %TARGET% -exe %PRODUCTNAME%.exe -installMode %INSTALLMODE%' -Verb RunAs}"
I'm trying to run a PowerShell script as administrator using a shortcut. I have tried many ways, but it still does not work:
C:\Windows\System32\WindowsPowerShell\v1.0\powershell.exe -ExecutionPolicy Bypass -NoExit -Verb RunAs Start-Process powershell.exe -ArgumentList '-file C:\project\test.ps1'
With this command, it will create two PowerShell windows and one window will close.
I also tried this one:
C:\Windows\System32\WindowsPowerShell\v1.0\powershell.exe -ExecutionPolicy Bypass -NoExit Start-Process powershell.exe -Verb RunAs -File 'C:\project\test.ps1'
Can some one please help?
Tl;dr
This will do the trick:
powershell.exe -Command "& {$wd = Get-Location; Start-Process powershell.exe -Verb RunAs -ArgumentList \"-ExecutionPolicy ByPass -NoExit -Command Set-Location $wd; C:\project\test.ps1\"}"
Explanation
First, you have to call PowerShell to be able to execute Start-Process. You don't need any additional paramters at this point, because you just use this first PowerShell to launch another one. You do it like this:
powershell.exe -Command "& {...}"
Inside the curly braces you can insert any script block. First you will retrieve your current working directory (CWD) to set it in the new launched PowerShell. Then you call PowerShell with Start-Process and add the -Verb RunAs parameter to elevate it:
$wd = Get-Location; Start-Process powershell.exe -Verb RunAs -ArgumentList ...
Then you need to add all desired PowerShell parameters to the ArgumentList. In your case, these will be:
-ExecutionPolicy ByPass -NoExit -Command ...
Finally, you pass the commands that you want to execute to the -Command parameter. Basically, you want to call your script file. But before doing so, you will set your CWD to the previously retrieved directory and THEN call your script:
Set-Location $wd; C:\project\test.ps1
In total:
powershell.exe -Command "& {$wd = Get-Location; Start-Process powershell.exe -Verb RunAs -ArgumentList \"-ExecutionPolicy ByPass -NoExit -Command Set-Location $wd; C:\project\test.ps1\"}"
The following script works fine in Powershell:
Set-ExecutionPolicy Bypass -Scope Process -Force; Invoke-Webrequest
'https://blah.blob.core.windows.net/laps/AutoAutoPilot.ps1' -OutFile
C:\script.ps1; C:\script.ps1
I'm trying to convert it so that it runs as a CMD/BAT file. I simply need to double click to run it. I need the CMD/BAT file to run Powershell as administrator and from there, it will run the script from above. Here's what I have. It'll just quit straight away without doing anything.
powershell -ExecutionPolicy Bypass -c Start-Process -Verb RunAs -Wait
powershell.exe '-ExecutionPolicy Bypass -Noexit -c Set-Location
"\"\\\"%CD%\\\"\""; -c "& Invoke-Webrequest
\"https://blah.blob.core.windows.net/laps/AutoAutoPilot.ps1\"
-OutFile C:\script.ps1; C:\script.ps1" '
Update:
I got it working now. The full output looks like this:
powershell -Command "& ({Start-Process powershell -Verb RunAs -ArgumentList '-ExecutionPolicy Bypass -NoExit -Command Invoke-WebRequest -Uri https://blah.blob.core.windows.net/laps/AutoAutoPilot.ps1 -OutFile C:\script.ps1; C:\script.ps1'})"
If you use the -NoExit parameter when starting powershell.exe PowerShell should not close after the script has finished running. Afterwards if you do not see errors, you can look at the $error variable, to see any errors which occurred when running your script.
You are trying to run your PowerShell code, using PowerShell.exe from command prompt, so you should be able to use the same code as you did before, when you were running your code directly in PowerShell before.
To my understanding you want to run powershell code in a batch-file.well Depending upon your preference there are multiple solutions to this problem(well i haven't checked any of them):
Solution:1
make a batch file and give your powershell script to it as a parameter.
Without Admin access:
#ECHO OFF
PowerShell.exe -NoProfile -ExecutionPolicy Bypass -Command "& '%~dpn0.ps1'"
PAUSE
With Admin access:
#ECHO OFF
PowerShell.exe -NoProfile -Command "& {Start-Process PowerShell.exe -ArgumentList '-NoProfile -ExecutionPolicy Bypass -File ""%~dpn0.ps1""' -Verb RunAs}"
PAUSE
Solution:2
If you don't want an external .ps1 file,then you can try this.just save it as something.bat
powershell -command if ($true)^
Set-ExecutionPolicy Bypass -Scope Process -Force; Invoke-Webrequest 'https://blah.blob.core.windows.net/laps/AutoAutoPilot.ps1' -OutFile C:\script.ps1; C:\script.ps1^
This should do the trick:
powershell -Command "& {Start-Process powershell -Verb RunAs -ArgumentList '-ExecutionPolicy Bypass -NoExit -Command Set-Location -Path C:\whatever\working\directory\you\need; Invoke-WebRequest -Uri https://blah.blob.core.windows.net/laps/AutoAutoPilot.ps1 -OutFile C:\script.ps1; C:\script.ps1'}"
Explanation:
When executing commands in PowerShell using the -Command argument, ExecutionPolicies do not apply as your are executing a single command and not a script. Even the execution of a scriptblock consisting of multiple commands counts as the execution of a single command. That's why you can directly call PowerShell from the command prompt like this (without anything else):
powershell -Command ...
-Command expects - to read from stdin or a scriptblock (read more). Scriptblocks have to be enclosed in curly braces ({...}). If you pass a scriptblock from the command prompt to PowerShell, you also have to add the call operator &:
powershell -Command "& {...}"
As you need an elevated PowerShell, you start a new PowerShell process from the previous PowerShell with Start-Process in combination with the -Verb RunAs argument. You add all arguments that you want to pass to the elevated PowerShell to the -ArgumentList argument:
... Start-Process powershell -Verb RunAs -ArgumentList '...' ...
As you want to call a script file, you now need the corresponding ExecutionPolicy. If you don't want to change it on the system, you can bypass the ExecutionPolicy with -ExecutionPolicy Bypass as you already did. And you also add -NoExit here. To pass your desired PowerShell commands, you use the -Command argument again. This time, you don't need the call operator and you can also omit the curly braces as we are now in PowerShell and not in the command prompt anymore.
... -ExecutionPolicy Bypass -NoExit -Command Set-Location -Path C:\whatever\working\directory\you\need; Invoke-WebRequest -Uri https://blah.blob.core.windows.net/laps/AutoAutoPilot.ps1 -OutFile C:\script.ps1; C:\script.ps1 ...
I would like to run the following as administrator:
PowerShell -NoProfile -ExecutionPolicy Unrestricted -Command
.\Get-WindowsAutoPilotInfo.ps1 -ComputerName $env:computername
-OutputFile .\computers.csv -append
I would like to simply double click on a .cmd or .bat file and have it invoke the Powershell script as administrator. Here's what I have:
PowerShell "SL -PSPath '%CD%'; $Path = (GL).Path; SL ~; Start
PowerShell -Verb RunAs -Args \"-ExecutionPolicy Unrestricted -Noexit"
SL -PSPath '"$Path"'; & '".\UninstallBloatware.ps1" "-ComputerName
$env:computername" "-OutputFile .\computers.csv" "-append"' "\""
I copied most of the code above from somewhere I can't remember. I don't know enough about quotes structure to know how to fix this. Any ideas what I'm doing wrong?
I tried to launch a long powershell script with the name "long name here.ps1" from command prompt. But I am also trying to ensure that it runs as an administrator command in powershell. I have all execution policies in powershell set accordingly I used the ss64 set-executionpolicy command guide for powershell to get powershell working. But I am trying to use the solution from another stackoverflow question that talks about running commands as administrator. I am running a batch script that needs to execute a powershell script (.ps1) as admin, and I don't mind if the user is prompted by UAC or for the password. I am currently using the following command:
powershell.exe -command "&{ Start-Process powershell -ArgumentList '-noprofile -file "C:\long name here.ps1"' -verb RunAs}"
I found this command at https://ss64.com/ps/powershell.html at the bottom where there are details on how to run a powershell command as administrator. The problem with that code is that my powershell script 1. has arguments, and 2. has a long name. I have tried many different iterations of this command with no success, and the ones that DON'T work are listed below:
powershell.exe -command "&{ Start-Process powershell -ArgumentList '-noprofile -file C:\long` name` here.ps1' -verb RunAs}"
powershell.exe -command "&{ Start-Process powershell -ArgumentList '-noprofile -file:"C:\long name here.ps1' -verb RunAs}"
Also, I am completely lost as to how to send arguments to the actual script.
If I'm reading your question correctly - powershell wont find the file as it stops reading the path name when it encounters a blank space?
The example given here specifies that; powershell commands to be run from command prompt as an administrator should have the following syntax:
powershell.exe -noprofile -command "&{ start-process powershell -ArgumentList '-noprofile -file MyScript.ps1' -verb RunAs}"
Couple of ways to achieve what you're looking for. But the easiest method would be to escape the quotes using a ` character. So something similar to;
powershell.exe -noprofile -command "&{ start-process powershell -ArgumentList '-noprofile -file `"C:\long file name.ps1`"' -verb RunAs}"
Also might be worth checking out other answers here
Use a Freeware Third Party Utility
If a freeware third-party executable is permissible, you can use a short tool I wrote called elevate32.exe (32-bit) and elevate64.exe (64-bit) to launch powershell.exe as administrator with the -File parameter and the script arguments you want to use:
elevate64 -- powershell.exe -File "<path>\<long script name>.ps1" -Arg "<long script argument>"
You can get the tool from www.westmesatech.com (copyrighted freeware, free to use anywhere, no installation needed).
Use a WSH Script
If you can't use an external executable, you can also do this (although it does not handle quoting in as robust a manner as the elevate tool's -- parameter) using a Windows Script Host (WSH) script, elevate.js:
var args = WScript.Arguments;
if ( args.Length >= 1 ) {
var exec = args.Item(0);
var cmdLine = "";
for (var i = 1; i < WScript.Arguments.Length; i++ ) {
cmdLine += cmdLine == "" ? '"' + args.Item(i) + '"' : ' "' + args.Item(i) + '"';
}
var shellApp = new ActiveXObject("Shell.Application");
shellApp.ShellExecute(exec, cmdLine, "", "runas");
}
You can call as follows:
wscript.exe "d:\path\elevate.js" powershell.exe -File "C:\long path\script name.ps1" "long script argument"
Self-Elevate your PowerShell Script
Another option is to write a self-elevating PowerShell script. You can check for elevation in the script; if not elevated, it can launch itself elevated and run any command you need. Example:
$isElevated = ([Security.Principal.WindowsPrincipal] [Security.Principal.WindowsIdentity]::GetCurrent()).IsInRole([Security.Principal.WindowsBuiltInRole]::Administrator)
if ( -not $isElevated ) {
Start-Process powershell.exe "-File",('"{0}"' -f $MyInvocation.MyCommand.Path) -Verb RunAs
exit
}
& "d:\long path name\script name.ps1" "Long Argument 1" "Long Argument 2"
When you use PowerShell.exe -Command you don't need to use quotes. For example, you can run the following:
PowerShell.exe -Command Get-Service 'wuauserv'
Everything after -Command is interpreted as the command. Note also that double quotes in CMD need escaping with a backslash. Therefore:
powershell.exe -Command Start-Process PowerShell -ArgumentList '-NoProfile -File \"C:\long name here.ps1\"' -Verb RunAs
If your file has arguments:
powershell.exe -Command Start-Process PowerShell -ArgumentList '-NoProfile -File \"C:\long name here.ps1\" \"Arg1\" \"Arg2\"' -Verb RunAs