I'm new to Clojure and new to Emacs.
Is there an Emacs short-cut to intelligently re-indent the whole file?
if not, is there at least a way to indent selected regions left or right?
I feel like I'm back in the stone age repeatedly pressing the arrows
C-x h selects the entire buffer. C-M-\ reindents the selected region.
Ctrl-x, h (select all) followed by Tab (to indent)
cider-format-buffer command (Since cider 0.9.0)
When you capture data from a sequence like C-u C-c C-e
(cider-eval-last-sexp), the raw data output to your buffer can be
unwieldy to inspect/work with. And the normal code-indenting commands
(mentioned in answers here) don't handle it well.
For handling results from such evaluated expressions, try
cider-format-edn-region.
As a concrete example, have you ever tried reformatting your
~/.lein/profiles.clj? This is pretty hard to do and keep
consistent, until you discover cider-format-edn-region. Take
caution that it will, however, remove any comments.
Use cljfmt for many configurable ways to reformat/reindent. It has an Emacs plugin, but also can be run via lein.
Related
I would find a way to execute the commands in the file emacs. Emacs and therefore automatically.
For example I often use: highlight-80
So I'm forced to type every time: Meta key + highlight-80 +-fashion
it's the same with linum-mode and plenty of other.
I have been trying to put in the file emacs.:
(highlight-80 +-mode)
But the option is not enabled.
Thank you in advance for your help. I am looking desperately for a moment, emacs is my working tool quotidient.
Regards
Use C-h f or C-h v, and read the Emacs manual about such choices.
Some of them are user options (variables), whose values you can customize, using M-x customize-option, so the default setting becomes what you want.
Others are modes, which you can call/set in your init file (~/.emacs) --- see the Emacs manual for how to do that. Typically, you use a positive number to turn a mode on and a negative number to turn it off. E.g.: (menu-bar-mode -1) in your init file turns off the use of a menu bar.
In sum, the Emacs manual (C-x r) is your friend. Sit down and have a first chat with it.
You seem generally a bit unsure about how customising Emacs works, so reading the manual on this topic should probably be your next step:
http://www.gnu.org/software/emacs/manual/html_node/emacs/Customization.html
If you are not using the current stable release (Emacs 24.3 at the moment), there's a chance that some of that information will not apply. The in-built manual is, of course, always correct for the version you are running:
C-hig (emacs) Customization RET
I'm new to Clojure and new to Emacs.
Is there an Emacs short-cut to intelligently re-indent the whole file?
if not, is there at least a way to indent selected regions left or right?
I feel like I'm back in the stone age repeatedly pressing the arrows
C-x h selects the entire buffer. C-M-\ reindents the selected region.
Ctrl-x, h (select all) followed by Tab (to indent)
cider-format-buffer command (Since cider 0.9.0)
When you capture data from a sequence like C-u C-c C-e
(cider-eval-last-sexp), the raw data output to your buffer can be
unwieldy to inspect/work with. And the normal code-indenting commands
(mentioned in answers here) don't handle it well.
For handling results from such evaluated expressions, try
cider-format-edn-region.
As a concrete example, have you ever tried reformatting your
~/.lein/profiles.clj? This is pretty hard to do and keep
consistent, until you discover cider-format-edn-region. Take
caution that it will, however, remove any comments.
Use cljfmt for many configurable ways to reformat/reindent. It has an Emacs plugin, but also can be run via lein.
in gedit it's possible to define so-called "snippets" for simpler input.
For example, there is a snippet while. This means: If you type while -> (-> stands for tab key). And gedit automatically converts it to the following (including correct indentation):
while (condition){
}
In vim (in conjunction with latex-suite) I saw the following: If you type (, vim inserts just a (. If you type ( a second time, vim automatically converts it to \left( \right).
I found abbrev-mode but this mode doesn't place the cursor properly (i.e. between parentheses or inside the while loop).
I managed to create custom emacs keybindings/macros that do just the same (without having to press the tab key), so I know it's possible.
However, is there already and package where you can define such "snippets" without much effort? Or are there even any serious reasons not to use such things?
See yasnippet. It provides snippets for most major languages, and it is easy to add new ones or modify the old ones.
Yes, yasnippet is probably the way to go. But make sure you learn the major mode you're using for your editing - when writing in LaTeX, learn auctex. Major modes can contain functionality that makes some snippets pointless, and do the same thing even better. So instead of using a begin/end-snippet in a LaTeX buffer, try C-c C-e in auctex. Etc :)
Don't forget abbrev-mode.
I've been using emacs for all of my text editing needs for the past three years now. When I'm in a single file, working on code or whatnot, I'm fairly efficient. With two files, I can "C-x b RET" between them and I do fine. However, whenever I need to be working on more than two files at a time, I tend to get lost.
Here are some of the problems that I'd like to work on:
I forget what some of my buffers are called, but I don't understand why C-x C-b splits my window into two buffers and exits the mini buffer. Sure I can switch buffers and choose a buffer to visit, but this feels unintuitive, and leaves me with two buffers open.
When I visit a directory rather than a file, I have a convenient list of all of the files and directories. I usually want to do one of two things with this: 1) Open a single file and never see this buffer again OR 2) Open a bunch of files and never see this buffer again. I don't really know how to do this, as moving the point to a file and hitting return doesn't do either of these things.
I know that my buffers aren't like tabs, but I have an inclination to want to scroll through them to find what I want. I don't know of any key-bindings for this, but I'd like it to be M-n / M-p or the like. Then again, this may be a horribly inefficient way to switch buffers.
When I open interactive help of any kind (for example in ESS), I have a habit of switching back to the buffer I was working in and using C-x 1 to get back to a single buffer. When I do this, however, the help buffer hangs around in my buffer list, further confusing me. I know I can switch to that buffer, kill it, switch back, and then go back to a single buffer, but this seems wrong.
The way I've dealt with this so far involves using a tiling window manager and a few emacs windows in different work-spaces, rather than actually learn the best way to manage a number of files in emacs. I don't necessarily want to change emacs to better fit my needs (although I am open to that if it fits in with what I'm about to say), instead, I'd like to grok the thought process behind handling files/buffers the way that emacs does, and how I can be more efficient with it.
Any answer that would help me understand the correct way, or a more efficient way to manage my buffers or files would be greatly appreciated.
Bind C-x C-b to ibuffer. This is a better buffer listing facility with many advanced features, and its default behaviour is to replace the current buffer with the buffer listing, and then bury the listing when you select a buffer (leaving you with the newly-selected buffer in place of the original one).
You can simply use C-x b to enter your selection in the mini-buffer, of course; however the tab-completion (which is needed to make this a viable option, IMO) does open a new window temporarily, at which point I think you might as well familiarise yourself with something with more features.
Use a instead of RET when selecting from dired. This kills the dired buffer instead of leaving it behind. C-h m in any buffer will show you the help for its major mode (followed by help for the minor modes), and you can read about all the available dired key bindings there.
http://www.emacswiki.org/cgi-bin/wiki/TabBarMode ? (edit: I prefer Rémi's answer for this one, but TabBarMode would give you the visual tab element if you were particularly keen on that.)
q is bound to a 'quit' function in a great many major modes. Generally it buries the buffer rather than killing it, but I certainly find that fine.
To elaborate a little on #1, ibuffer has lots of nice features, and M-x customize-group ibuffer RET will give you some idea of how you can customise it to your liking.
Furthermore, you can filter the buffer list by many criteria (again, use C-h m to see its help page), and then generate a 'group' definition from the current filters, and save your custom filters and groups for future usage.
For example:
/ f ^/var/www/ RET: filter buffer list to show only filenames starting with /var/www/.
/ s Web filters RET: name and save active filter set to your init file.
/ g Web development RET: create a named group from the active filters.
/ S My groups RET: name and save group definitions to your init file.
/ r Web filters RET: invoke the "Web filters" filters.
/ R My groups RET: invoke the "My groups" groups.
RET on a group name to collapse or expand it.
C-k and C-y to kill and yank groups, to re-arrange them.
C-h m for more information...
This way you can have a single Emacs instance running, and create filters and groups for different types of task, and easily switch between them.
I think you will really enjoy Ido for dealing with multiple buffers who's names you can't exactly remember. When you type C-x b it shows a list of open buffers in most used order. As you type some of the characters in a buffer name the list is filtered. The characters you type don't have to be at the begging of the name or contiguous. Using C-f, C-b or left/right arrow keys cycles through the buffer choices.
Also see Smex for Ido like functionality for M-x
Closing windows is done with C-x 0. Intentionally splitting the window is done with C-x 2 for horizontal, C-x 3 for vertical. I love this feature, since it allows me to have test and production code visible at the same time. C-x o takes me to the other window.
I use C-x right (or C-x C-right) and C-x left (or C-x C-right) to go to the next and previous buffer. I don't mind anymore off the few buffer that lay around in Emacs but you could use k in the buffer list to kill the buffer you don't use anymore.
You can also try Iswitchb mode which provides auto-completion for buffer names when you switch buffers via C-x b.
To activate:
M-x iswitchb-mode
Or add to your .emacs file:
(iswitchb-mode)
It is similar to Ido mode for buffer switching but a bit more lightweight.
Also, if you want a more customizable listing of your buffers then use M-x bs-show as an alternative to C-x C-b. In that buffer type ? to get a list of actions you can perform.
I think the number one most useful extension for flipping through buffers is Anything. It lets you start typing part of a buffer (or file!) name and it will figure out what you want. I've rebound C-x b to anything-for-buffers. It makes life so much better.
As always, there are many ways to help you with this; it depends a bit on personal preference what works best, here are some links with explanations:
ibuffer; which is an updated buffer menu (C-x C-b)
ido, which let's you have more powerful autocompletion to switch through buffers. It's a kind-of 'better iswitchb'.
These two are enough for me; but you may also be interested in the tabbar-mode, which gives you rudimentary tabs (like firefox has them).
In vim, visual block can be recall by 'gv' command so that multiple commands can be applied easily. (such as, comment out, then indent, then do_something_fun).
In Emacs, how can this be achieved?
[C-xC-x] only works when current cursor position stays where previous block ended.
If previous block was changed, the closest is to go through 'point-to-register' and 'jump-to-register'.
Just I am curious if there is an Emacs built-in command making this in one shot.
If Transient Mark mode is off, the region is always active. If it's on (which it sounds like is your situation), you can set mark-even-if-inactive to non-nil to allow region commands to work while the region isn't highlighted.
However, note you also can cycle back through previous mark positions using C-u C-SPC -- this will pop the mark ring. Once you're back to where you want to be, C-x C-x will rehighlight the region you want. (It may take a little bit of playing with this feature to get a feel for it, but it's why I can't switch away from Emacs now.)
If I understand correctly what you are asking for, then you don't need to do anything. When you select a region in emacs, it stays selected until you select a new one. So you could select the region and then perform as many actions as you want.
Sounds like you're looking for the secondary selection, which stays put even as the region might change. (It stays put until you move it.)
See:
the Emacs manual, node Secondary Selection
Emacs wiki page Secondary Selection
library second-sel.el:
Also narrow-to-region (CTRL-x n n ) applies every command from then on just to that region- you can't hurt the rest of the buffer, it doesn't even show. After done editing , widen (CTRL-x n w )to get back the whole buffer.
CMM
If you use evil-mode, just press gv like in vim.
Since the answers here and for other similar SO questions didn't help for me (CUA-mode, Emacs 24, not only indent-rigidly), I continued searching and finally found a reselect-last-region defined in this collection of custom function (starting line 670). That worked like a charm for me - and hopefully does for others still arriving here.