I don't understand why the following sed command contains an # symbol:
sed 's#session\s*required\s*pam_loginuid.so#session optional pam_loginuid.so#g' -i /etc/pam.d/sshd
I've looked at /etc/pam.d/sshd for the before/after effects of this command:
BEFORE:
...
# Set the loginuid process attribute.
session required pam_loginuid.so
...
AFTER:
...
# Set the loginuid process attribute.
session optional pam_loginuid.so
....
Is the # symbol possibly part of regex or sed syntax?
Could not find any doco on this.
Note: The above sed command is actually part of a Dockerfile RUN command in tutorial:
https://docs.docker.com/examples/running_ssh_service/
These are alternate delimiters for the regular expressions and replacement string. Handy when your regex or replacement string includes '/'.
From the sed manual
The syntax of the s (as in substitute) command is ‘s/regexp/replacement/flags’. The / characters may be uniformly replaced by any other single character within any given s command. The / character (or whatever other character is used in its stead) can appear in the regexp or replacement only if it is preceded by a \ character.
From the POSIX specification:
[2addr]s/BRE/replacement/flags
Substitute the replacement string for instances of the BRE in the pattern space. Any character other than <backslash> or <newline> can be used instead of a to delimit the BRE and the replacement. Within the BRE and the replacement, the BRE delimiter itself can be used as a literal character if it is preceded by a <backslash>.
as other says, it is another delimiter than traditionnal / in the s///action. This is usually used when / is found/part of the pattern like searching (or replacing by) a unix path that need to escape the /
s/\/my\/path/\/Your\/path/
# same as
s#my/path#/Your/path#
You often use a character that is not alpha numeric (but you can). The only (logical) constraint is to avoid a special character (aka special meaning like ^$[]{}()+\*.) for regex that make it difficult to read (but functionnal) and without the feature of this character in the pattern
echo "b(a)l" | sed 's(.)()('
Related
I am using sed in a shell script to edit filesystem path names. Suppose I want to replace
/foo/bar
with
/baz/qux
However, sed's s/// command uses the forward slash / as the delimiter. If I do that, I see an error message emitted, like:
▶ sed 's//foo/bar//baz/qux//' FILE
sed: 1: "s//foo/bar//baz/qux//": bad flag in substitute command: 'b'
Similarly, sometimes I want to select line ranges, such as the lines between a pattern foo/bar and baz/qux. Again, I can't do this:
▶ sed '/foo/bar/,/baz/qux/d' FILE
sed: 1: "/foo/bar/,/baz/qux/d": undefined label 'ar/,/baz/qux/d'
What can I do?
You can use an alternative regex delimiter as a search pattern by backslashing it:
sed '\,some/path,d'
And just use it as is for the s command:
sed 's,some/path,other/path,'
You probably want to protect other metacharacters, though; this is a good place to use Perl and quotemeta, or equivalents in other scripting languages.
From man sed:
/regexp/
Match lines matching the regular expression regexp.
\cregexpc
Match lines matching the regular expression regexp. The c may be any character other than backslash or newline.
s/regular expression/replacement/flags
Substitute the replacement string for the first instance of the regular expression in the pattern space. Any character other than backslash or newline can be used instead of a slash to delimit the RE and the replacement. Within the RE and the replacement, the RE delimiter itself can be used as a literal character if it is preceded by a backslash.
Perhaps the closest to a standard, the POSIX/IEEE Open Group Base Specification says:
[2addr] s/BRE/replacement/flags
Substitute the replacement string for instances of the BRE in the
pattern space. Any character other than backslash or newline can
be used instead of a slash to delimit the BRE and the replacement.
Within the BRE and the replacement, the BRE delimiter itself can be
used as a literal character if it is preceded by a backslash."
When there is a slash / in theoriginal-string or the replacement-string, we need to escape it using \. The following command is work in ubuntu 16.04(sed 4.2.2).
sed 's/\/foo\/bar/\/baz\/qux/' file
I am using sed in a shell script to edit filesystem path names. Suppose I want to replace
/foo/bar
with
/baz/qux
However, sed's s/// command uses the forward slash / as the delimiter. If I do that, I see an error message emitted, like:
▶ sed 's//foo/bar//baz/qux//' FILE
sed: 1: "s//foo/bar//baz/qux//": bad flag in substitute command: 'b'
Similarly, sometimes I want to select line ranges, such as the lines between a pattern foo/bar and baz/qux. Again, I can't do this:
▶ sed '/foo/bar/,/baz/qux/d' FILE
sed: 1: "/foo/bar/,/baz/qux/d": undefined label 'ar/,/baz/qux/d'
What can I do?
You can use an alternative regex delimiter as a search pattern by backslashing it:
sed '\,some/path,d'
And just use it as is for the s command:
sed 's,some/path,other/path,'
You probably want to protect other metacharacters, though; this is a good place to use Perl and quotemeta, or equivalents in other scripting languages.
From man sed:
/regexp/
Match lines matching the regular expression regexp.
\cregexpc
Match lines matching the regular expression regexp. The c may be any character other than backslash or newline.
s/regular expression/replacement/flags
Substitute the replacement string for the first instance of the regular expression in the pattern space. Any character other than backslash or newline can be used instead of a slash to delimit the RE and the replacement. Within the RE and the replacement, the RE delimiter itself can be used as a literal character if it is preceded by a backslash.
Perhaps the closest to a standard, the POSIX/IEEE Open Group Base Specification says:
[2addr] s/BRE/replacement/flags
Substitute the replacement string for instances of the BRE in the
pattern space. Any character other than backslash or newline can
be used instead of a slash to delimit the BRE and the replacement.
Within the BRE and the replacement, the BRE delimiter itself can be
used as a literal character if it is preceded by a backslash."
When there is a slash / in theoriginal-string or the replacement-string, we need to escape it using \. The following command is work in ubuntu 16.04(sed 4.2.2).
sed 's/\/foo\/bar/\/baz\/qux/' file
I am using sed in a shell script to edit filesystem path names. Suppose I want to replace
/foo/bar
with
/baz/qux
However, sed's s/// command uses the forward slash / as the delimiter. If I do that, I see an error message emitted, like:
▶ sed 's//foo/bar//baz/qux//' FILE
sed: 1: "s//foo/bar//baz/qux//": bad flag in substitute command: 'b'
Similarly, sometimes I want to select line ranges, such as the lines between a pattern foo/bar and baz/qux. Again, I can't do this:
▶ sed '/foo/bar/,/baz/qux/d' FILE
sed: 1: "/foo/bar/,/baz/qux/d": undefined label 'ar/,/baz/qux/d'
What can I do?
You can use an alternative regex delimiter as a search pattern by backslashing it:
sed '\,some/path,d'
And just use it as is for the s command:
sed 's,some/path,other/path,'
You probably want to protect other metacharacters, though; this is a good place to use Perl and quotemeta, or equivalents in other scripting languages.
From man sed:
/regexp/
Match lines matching the regular expression regexp.
\cregexpc
Match lines matching the regular expression regexp. The c may be any character other than backslash or newline.
s/regular expression/replacement/flags
Substitute the replacement string for the first instance of the regular expression in the pattern space. Any character other than backslash or newline can be used instead of a slash to delimit the RE and the replacement. Within the RE and the replacement, the RE delimiter itself can be used as a literal character if it is preceded by a backslash.
Perhaps the closest to a standard, the POSIX/IEEE Open Group Base Specification says:
[2addr] s/BRE/replacement/flags
Substitute the replacement string for instances of the BRE in the
pattern space. Any character other than backslash or newline can
be used instead of a slash to delimit the BRE and the replacement.
Within the BRE and the replacement, the BRE delimiter itself can be
used as a literal character if it is preceded by a backslash."
When there is a slash / in theoriginal-string or the replacement-string, we need to escape it using \. The following command is work in ubuntu 16.04(sed 4.2.2).
sed 's/\/foo\/bar/\/baz\/qux/' file
I am using sed in a shell script to edit filesystem path names. Suppose I want to replace
/foo/bar
with
/baz/qux
However, sed's s/// command uses the forward slash / as the delimiter. If I do that, I see an error message emitted, like:
▶ sed 's//foo/bar//baz/qux//' FILE
sed: 1: "s//foo/bar//baz/qux//": bad flag in substitute command: 'b'
Similarly, sometimes I want to select line ranges, such as the lines between a pattern foo/bar and baz/qux. Again, I can't do this:
▶ sed '/foo/bar/,/baz/qux/d' FILE
sed: 1: "/foo/bar/,/baz/qux/d": undefined label 'ar/,/baz/qux/d'
What can I do?
You can use an alternative regex delimiter as a search pattern by backslashing it:
sed '\,some/path,d'
And just use it as is for the s command:
sed 's,some/path,other/path,'
You probably want to protect other metacharacters, though; this is a good place to use Perl and quotemeta, or equivalents in other scripting languages.
From man sed:
/regexp/
Match lines matching the regular expression regexp.
\cregexpc
Match lines matching the regular expression regexp. The c may be any character other than backslash or newline.
s/regular expression/replacement/flags
Substitute the replacement string for the first instance of the regular expression in the pattern space. Any character other than backslash or newline can be used instead of a slash to delimit the RE and the replacement. Within the RE and the replacement, the RE delimiter itself can be used as a literal character if it is preceded by a backslash.
Perhaps the closest to a standard, the POSIX/IEEE Open Group Base Specification says:
[2addr] s/BRE/replacement/flags
Substitute the replacement string for instances of the BRE in the
pattern space. Any character other than backslash or newline can
be used instead of a slash to delimit the BRE and the replacement.
Within the BRE and the replacement, the BRE delimiter itself can be
used as a literal character if it is preceded by a backslash."
When there is a slash / in theoriginal-string or the replacement-string, we need to escape it using \. The following command is work in ubuntu 16.04(sed 4.2.2).
sed 's/\/foo\/bar/\/baz\/qux/' file
I am using sed in a shell script to edit filesystem path names. Suppose I want to replace
/foo/bar
with
/baz/qux
However, sed's s/// command uses the forward slash / as the delimiter. If I do that, I see an error message emitted, like:
▶ sed 's//foo/bar//baz/qux//' FILE
sed: 1: "s//foo/bar//baz/qux//": bad flag in substitute command: 'b'
Similarly, sometimes I want to select line ranges, such as the lines between a pattern foo/bar and baz/qux. Again, I can't do this:
▶ sed '/foo/bar/,/baz/qux/d' FILE
sed: 1: "/foo/bar/,/baz/qux/d": undefined label 'ar/,/baz/qux/d'
What can I do?
You can use an alternative regex delimiter as a search pattern by backslashing it:
sed '\,some/path,d'
And just use it as is for the s command:
sed 's,some/path,other/path,'
You probably want to protect other metacharacters, though; this is a good place to use Perl and quotemeta, or equivalents in other scripting languages.
From man sed:
/regexp/
Match lines matching the regular expression regexp.
\cregexpc
Match lines matching the regular expression regexp. The c may be any character other than backslash or newline.
s/regular expression/replacement/flags
Substitute the replacement string for the first instance of the regular expression in the pattern space. Any character other than backslash or newline can be used instead of a slash to delimit the RE and the replacement. Within the RE and the replacement, the RE delimiter itself can be used as a literal character if it is preceded by a backslash.
Perhaps the closest to a standard, the POSIX/IEEE Open Group Base Specification says:
[2addr] s/BRE/replacement/flags
Substitute the replacement string for instances of the BRE in the
pattern space. Any character other than backslash or newline can
be used instead of a slash to delimit the BRE and the replacement.
Within the BRE and the replacement, the BRE delimiter itself can be
used as a literal character if it is preceded by a backslash."
When there is a slash / in theoriginal-string or the replacement-string, we need to escape it using \. The following command is work in ubuntu 16.04(sed 4.2.2).
sed 's/\/foo\/bar/\/baz\/qux/' file