Is there any way to write code for the Quark CPU on the Intel Edison and establish a communication between the Quark CPU, which is - as far as i know - running an RTOS, and the Atom CPU, which is running Yocto.
I've googled for some tutorials but didn't find any.
Thank you guys!
According to several postings in the Intel forum it is not supported at this time
Related
I want to test Intel SGX technology on my Lenovo Tower S510 10L3-000JFM. I checked via https://github.com/ayeks/SGX-hardware that my CPU Intel Core i7-6700 supports SGX but BIOS does not, or may be not enabled (in BIOS). A BIOS update can fix this. However, a recent BIOS update from Lenovo in https://pcsupport.lenovo.com/us/en/products/desktops-and-all-in-ones/lenovo-s-series-all-in-ones/s510-desktop/10kw/downloads/ds112505 does not specify that explicitly as I do not want to proceed to this risky operation without being sure.
My question is: is this BIOS update supporting Intel SGX? Or not?
Any help or resources are welcomed.
Last BIOS update is on 01/09/2016 and last CPU microcode update is on 07/01/2016.
According to a Lenovo BIOS engineer, BIOS for this computer model does not support Intel SGX and there is no plan for the future.
The Linux kernel does not transparently handle the Intel SGX. An application has to be written specifically for Intel SGX to use it.
If you just want to write code for Intel SGX, you can use the SIMULATION mode provided in the SGX SDK to write code and test it out. You won't be able to use Remote Attestation (and Local attestation) as it requires access to the hardware. Apart from that, everything should work fine.
I tried searching and searching and can't find a reason why one can't boot Linux from iPhone. I am not asking if there are drivers available for Linux or anything like that, I am just wondering why one can't boot Linux on a standard ARM processor ?
There isn't any such thing as a "standard ARM processor". Every ARM-based SoC is a little bit different, and Apple doesn't publish any information about how their SoCs work. (They aren't even standard Cortex-A designs; the Apple A6 and later all use CPU cores which were customized by Apple.)
Additionally, all of Apple's SoCs contain a bootloader in ROM which verifies a cryptographic signature before running any software from flash memory. This makes it impossible to run an operating system which was not signed by Apple.
Before 3 weeks maybe, i faced a problem in launching WP emulator. After troubleshooting, i found that visualization option in my Laptop is not running successfully.
Laptop spec. (Acer 4253):
CPU: AMD E-350, Zacate 40nm Technology
OS: Operating System, Windows 10 Pro 64-bit
RAM: 4.00GB DDR3 # 532MHz
I have downloaded Speccy to check visualization info, since nothing relate to visualization is appear in bios settings, and i found that "Hyper-threading" is not supported!, any help?
Hyperthreading is only an Intel technology, AMD doesn't have hperthreading on any of it's processors evem the AMD FX generation.
Hyper-threading (officially called Hyper-Threading Technology or HT Technology, and abbreviated as HTT or HT) is Intel's proprietary simultaneous multithreading (SMT) implementation used to improve parallelization of computations.
For Virtualizaton, you have written it ok in the title, but you wrote visualization wrong every time... processors dont have visualization.:)
Everything on your WP configuration looks ok, you shouldn't worry what the amd parameters are because they are just fine... you have to just configure and run the program same as for any amd processor, which is probably the same with intel, programs have almost zero configuration differences between the two.
Beginner here.
cpu says > 4GB, OS tells <4GB.
What is the answer?
I saw in windows, it is 2.8GB, in linux i think it can access complete 4GB
I'm wondering if it's possible to run a sparc/solaris guest VM under Xen on an intel based host?
It would seem possible for Qemu to emulate a number of guest architectures (including sparc), therefore it looks doable yet I can't seem to find any reference to anyone who has done this!
Any help/pointers much appreciated.
Thanks in advance.