I'm using Jenkins and I would like to send an email after finished job. The problem I have is that I want to use the username defined before into a parameter in the configuration. I try to use then ${username} but i doesn't work. This is the error I get:
Sending e-mails to: ${username}#email.es
ERROR: Invalid Addresses
javax.mail.SendFailedException: Invalid Addresses;
nested exception is:
com.sun.mail.smtp.SMTPAddressFailedException: 550 5.1.1 <${username}#email.es>... User unknown
at com.sun.mail.smtp.SMTPTransport.rcptTo(SMTPTransport.java:1835)
at com.sun.mail.smtp.SMTPTransport.sendMessage(SMTPTransport.java:1098)
at javax.mail.Transport.send0(Transport.java:195)
at javax.mail.Transport.send(Transport.java:124)
at hudson.tasks.MailSender.run(MailSender.java:126)
at hudson.tasks.MailSender.execute(MailSender.java:101)
at hudson.maven.MavenModuleSetBuild$MavenModuleSetBuildExecution.cleanUp(MavenModuleSetBuild.java:1064)
at hudson.model.Run.execute(Run.java:1764)
at hudson.maven.MavenModuleSetBuild.run(MavenModuleSetBuild.java:531)
at hudson.model.ResourceController.execute(ResourceController.java:89)
at hudson.model.Executor.run(Executor.java:240)
Caused by: com.sun.mail.smtp.SMTPAddressFailedException: 550 5.1.1 <${username}#email.es>... User unknown
at com.sun.mail.smtp.SMTPTransport.rcptTo(SMTPTransport.java:1686)
... 10 more
It is not taking the value of the parameter. Is thera any plugin or way to do this ?
Thanks for your help.
instead of ${username} - use $username
Ex: $username#$domain.com
Here, username and domain are two parameters for build
(defined by selecting checkbox-This build is parameterized)
Configure Jenkins System for Email Notifications
To do this:
"Jenkins Dashboard -> Manage Jenkins -> Configure System"
At the bottom of the page- find : Email Notification
Then give email notification details
I have configured like this:
SMTP server : smtp.gmail.com
Default user e-mail suffix : #gmail.com
select checkbox USE smtp authentication
give: username (without #gmail.com) -eg: enter mike for mike#gmail.com
give your password
Select checkbox Use SSL
SMTP port : 465
try your email settings by sending a test mail
If your able to send it successfuly. its done
/* In the Build - The Build is Parameterized */
1st parameter
Name : username
Default Value : mike
2nd Parameter
Name: domain
Default Value: gmail
//Post-Build Actions - Email Notification
(able to see this only when you have Mailer plugin installed)
Recipients : $username#$domain.com
This should work ..
I 'found' the solution. With a maven project, it doesn' work with the simply Email notification inside the Build properties. I must use a plugin 'Ext-mail plugin' to do it. Thanks for all.
Related
I use adonis js version 4.1.0 and #adonisjs/mail version ^3.0.10. I'm not sure why. But I'm sure my email and password are correct which previously email can be used normally. Please help me. Thank for your solution. I got this error when I send email ExceptionHandler Invalid login: 535-5.7.8 Username and Password not accepted. Learn more at 535 5.7.8 https://support.google.com/mail/?p=BadCredentials 136-20020a62188e000000b0050dc7628158sm4991712pfy.50 - gsmtp
my .env like this
MAIL_USERNAME=test#gmail.com
MAIL_PASSWORD=testpw
SMTP_HOST=smtp.gmail.com
and I using
const data = `<div>Testing</div>`;
await Mail.raw(data, (message) => {
message.to(getEmail.email);
message
.from(`${Env.get("MAIL_USERNAME")}`)
.subject("Test Email Sending");
});
In my config/mail.js
Due to a change in Google email policy, you can't send mail using your password.
enable 2-step verification click
create App passwords for your mail click
replace your .env MAIL_PASSWORD with generated 16 digit app password.
I have Keycloak running in a Kubernetes cluster. Authentication works but I need to set up e-mail to be able to send e-mails for verification and password reset.
I have SendGrid set up as an SMTP Relay. These settings (host, port and api key) work when I send mail using the SendGrid java client. However, when pressing Test connection in KeyCloak I get:
[Error] Failed to load resource: the server responded with a status of 500 ()
[Debug] Remove message (services.js, line 14)
[Debug] Added message (services.js, line 15)
[Error] Can't find variable: error
https://<domain>/auth/resources/ong8v/admin/keycloak/js/controllers/realm.js:76 – "Possibly unhandled rejection: {}"
[Debug] Remove message (services.js, line 14)
There isn't much to go on here. I have an e-mail address set up for the currently logged in user. I've also tried resetting the password in case the Test connection functionality was broken but that didn't work either.
The Realm Settings settings user for email are as such:
host: smtp.sendgrid.net
port: 587
from: test#<domain>
Enable StartTLS: true
Username: "apikey"
Password: <api key>
Any idea what can be wrong? Or how to find out? For instance, maybe I can get a more meaningful error message somehow.
Edit:
I got the server logs.
Failed to send email: com.sun.mail.util.MailConnectException: Couldn't connect to host, port: smtp.sendgrid.net, 587; timeout 10000;
nested exception is: java.net.SocketTimeoutException: connect timed out
Edit 2:
I've tried sending mail using Telnet using the exact same settings and that works. So apparently it's something with Keycloak or its underlying Java libraries that's causing issues sending e-mail.
Turns out that Keycloak works and that emails were blocked by the hosting provider.
I am writing a Rust application that will send email through an Exchange server with SMTP functionality enabled. According to Microsoft's webpage, the settings that are required are:
Server address smtp.office365.com
Port 587
StartTLS Enabled
Credentials for mail account login
These are corroborated by the POP/IMAP settings of the webmail service.
Here is my code (with some censoring):
extern crate lettre;
use self::lettre::email::EmailBuilder;
use self::lettre::transport::smtp::{SecurityLevel, SmtpTransportBuilder, SUBMISSION_PORT};
use self::lettre::transport::smtp::authentication::Mechanism;
use self::lettre::transport::EmailTransport;
pub fn send_mail() {
let email = EmailBuilder::new()
.from("my email")
.to("destination email")
.body("testing")
.subject("testing")
.build()
.unwrap();
// Connect to SMTP server
let mut transport = SmtpTransportBuilder::new(("smtp.office365.com", SUBMISSION_PORT))
.expect("Failed to create email transport")
.encrypt()
.smtp_utf8(true)
.credentials("my email", "my password")
.authentication_mechanism(Mechanism::Login)
.build();
println!("Mail transport built");
println!("{:?}", transport.send(email.clone()));
}
When I compile and run the code,it gives me this error:
Err(Permanent(Response { code: Code { severity:
PermanentNegativeCompletion, category: Unspecified3, detail: 0 },
message: ["5.7.57 SMTP; Client was not authenticated to send anonymous
mail during MAIL FROM [SYXPR01CA0106.ausprd01.prod.outlook.com]"] }))
Why is this happening?
The closest I've come in my research is an issue on GitHub in relation to the lettre library not supporting the Login authentication mechanism (which Office 365 uses); however, the codebase was updated to support Login and I am using the master branch directly from GitHub so theoretically my application should support the Login mechanism.
Edit: Forgot to mention that I attempted an EHLO to the server, but it returned a (Client:(Connection closed)) error.
I used telnet and openssl to try connecting directly to my SMTP server, where I found that AUTH LOGIN requires 3 commands; one to send the AUTH LOGIN code, one to send the username and another to send the password. I found that the lettre library implements all its AUTH commands as single commands, so this wasn't working with the server. I downloaded the source code for the library, changed the send function to do the three separate commands, recompiled my code and everything worked fine :)
My addition to the lettre code:
if (accepted_mechanisms[0] == Mechanism::Login) &&
(accepted_mechanisms.capacity() == 1) {
try_smtp!(self.client.command("AUTH LOGIN"), self);
try_smtp!(self.client.command(base64::encode_config(
&username.as_bytes(),
base64::STANDARD).as_str()), self);
try_smtp!(self.client.command(base64::encode_config(
&password.as_bytes(),
base64::STANDARD).as_str()), self);
I've gone through the SendGrid integration instructions for Exim (http://docs.sendgrid.com/documentation/get-started/integrate/examples/exim/)
However, any email I send now is not being sent. Its all stuck in the queue. I looked for the log file for a message I'm trying to send and this is what I get:
2011-10-12 19:49:14 cwd=/var/spool/exim 3 args: /usr/sbin/exim -Mc 1RE9U2-0007Qg-20
+++ 1RE9U2-0007Qg-20 has not completed +++
2011-10-12 19:49:14 1RE9U2-0007Qg-20 <= email#example.com H=localhost [127.0.0.1] P=esmtpa A=dovecot_login:email#example.com S=731 id=20111012194913.13697j8jpb4heop5#example.com T="Test"
2011-10-12 19:49:14 1RE9U2-0007Qg-20 == email#gmail.com R=send_via_sendgrid T=sendgrid_smtp defer (-53): retry time not reached for any host
I've had the support rebuild the exim db, but that hasn't helped. I'm thinking it has to do with the fact that its using the dovecot login instead of the sendgrid login which is added after it. How do I make it use the sendgrid login info? Thanks!!
If you aren't using your SG credentials you're going to run into authentification issues.
Try the following to make sure you are using the correct credentials:
*:sendgridusername:sendgridpassword
I'm using Grails Mail plugin and trying to send email and keep getting:
Error 500: Executing action [sendInvite] of controller
[RegisterController] caused exception: Failed messages:
javax.mail.SendFailedException: Invalid Addresses; nested exception
is: com.sun.mail.smtp.SMTPAddressFailedException: 550 must be
authenticated
I'm properly following the instructions at: http://www.grails.org/Mail+plugin
The mail server is returning an error when you try to send out the mail. 550 is a generic SMTP failure code; in this case it looks like you are missing a username and password. Some SMTP servers to not require authentication but most do, especially if they're publicly available on the internet. It's also possible that your SMTP server requires an SSL connection and you're connecting with an unsecured socket.
The example config for gmail shows how to set all the mail server authentication options in Config.groovy:
grails {
mail {
host = "smtp.gmail.com"
port = 465
username = "youracount#gmail.com"
password = "yourpassword"
props = ["mail.smtp.auth":"true",
"mail.smtp.socketFactory.port":"465",
"mail.smtp.socketFactory.class":"javax.net.ssl.SSLSocketFactory",
"mail.smtp.socketFactory.fallback":"false"]
}
}
Add "mail.debug": "true" to props to turn on JavaMail debugging to get a better picture of what is happening before the failure.
In my case the 550 error was caused by me having accidentally selected and IMAP account as the default account but sending emails from my Outlook Connector Account (which has no authentication settings to make).
I changed the Outlook Connector Account to default. Resent the emails and no errors.
So check that the correct email account is set up as the default also