The exact already asked question to what I'd like to do is: how to add tooltip on the entries and not the combo....
I cannot use a CCombo. JoeYo said that he solved it by using a DefaultToolTip class on the Combo, but he didn't elaborate.
Can anyone, (#JoeYo hopefully) give me a bit more detail how to got the handle on the list, once dropped, to capture the mouse hover events, and then of course display the tool tip?
If I was supposed to ask for more info on the original question, I could not figure out how. I tried to comment, but was told I did not have enough credits.
DefaultToolTip is part of JFace. Other than the native tooltip of the platform, it can be freely positioned and shown/hidden. Internally it is comprised of a Shell that when shown stays on top of all other controls.
In combination with a MouseListener, the getVisibleItemCount() and getItemHeight you might be able to compute above which item (if any) the mouse cursor hovers and show a tooltip with suitable content.
This answer has a snippet that computes which item of a List widget is under the mouse pointer. It should be possible to adapt it for the Combo widget. The remaining difficulty is probably to figure out the of the drop-down and the gap between of the Combo and its drop-down.
Related
I've been seeing this UI technique quite often at Dribbble, mostly demonstrated on iPhone as timeline, and I am really wondering if it's possible to do so on Android. The idea is to exploit scrollbar, make it activate each row it is passing.
Consider these schematics of a list of contact.
The first one is the list (photos on the left side, names on the right) split roughly in the middle with scroll track.
The scrollbar cannot expand and has to be smaller than the smallest row. I believe it is possible to produce this kind of arrangement by combining two listviews and make them roll together.
The second one shows the screen when scrolled and when the scrollbar moves to the second row. After it stops, the second row will expand its height. All hidden elements there like address, phone, etc will show up. Also, the moment the scrollbar leaves the first row / hits the second, the first row will toggle off. It will shrink and remove all elements except name.
I have been thinking about this scenario and one key question in this technique is whether the scrollbar has the ability to activate the row it hits. The only tool I know in regard to scrolling is onScrollListener but I wonder if it's sufficient. Does anyone have any insight into such scenario ?
Thank you in advance.
I've been seen something similar to this in lots of applications. Some of them are just using ListView with design tricks to look like that, others with custom views or something else. The idea which I have in my about this implementation is using two Fragments: left and right which are placed in one FragmentActivity. Left Fragment will be your image holder, where for example you will have a ListView or some other view depending on your choice which will communicate with the Right Fragment and when LeftFragment's ListView stop scrolling, fire an event to RightFragment's ListView to scroll to position 5 for example and expand that item. Not really sure if it's the best option and if it will work properly as you want, but that's the first idea which I can think of to do some implementation like this.
Hope this help you find the right answer.
I have a data entry form. Its properly tab indexed etc. and there are three dropdown menus which automatically unfurl with the on enter event.
No matter how much advice i give to users about using the tab key and keboard and checking what they just input.
they still insist on using the mouse to select values from the dropdown menus
the problem is that in their haste they often make mistakes as a result of using the mouse.
I would like to be able to force users to input into these fields using the keyboard.
the drop down is neccessary for users see the appropriate values for the field because the values will vary based on previous selections.
I have already tried experimenting with onclick events but to no avail.
Is there a way I can do this?
i am using access 2007 many of the users have access 2003.
Based on your comments, I would take one of two different approaches.
If your users are really comfortable with the codes AND know which ones they should use based on their previous selections, then just use text boxes instead of combo boxes. You can still put some validation code in either the Form_BeforeUpdate event or the individual control's _BeforeUpdate event.
If the users are not that comfortable, then I would suggest you have the first field in the combo boxes be the description of the code, not the code itself. So instead of choosing from 101, 102, 103 they are instead choosing from "Small", "Medium", "Large" or whatever those codes actually apply to. If you still wanted to display the codes themselves, you could do that with a separate disabled text box.
Now to answer your actual question. For the record, I highly recommend against using this approach. The simplest way I can thing of to prevent your users from using the mouse to select the combo box, would be to add a Transparent button covering the combo box.
To do this, draw a regular command button over the combo. Set Transparent = Yes, Visible = Yes, Enabled = Yes, Tab Stop = No.
When users click on the combo now, they will actually be clicking on the Transparent button and nothing will happen. The ONLY way they will be able to get into the control is by tabbing from a neighboring control or using a hotkey (via '&' in attached label).
Once they enter the control via Tab and your code forces a dropdown, they will still be able to choose an option using the mouse. But by forcing them to use the keyboard initially, it will make it much more likely that they just stick with the keyboard.
Again--I can't stress this enough--I think this is a terrible, horrible, no-good idea. Please don't use this approach. But you asked a technical question and this site is all about giving technical answers, so there you go...
Is there any way to customize the map annotation bubbles in Appcelerator Titanium? Specifically, I'd like them to be able to display more text than what they show (ideally, by expanding to fit the text). I know I can make them clickable and take the user to a page with more info, but I simply don't have enough information to warrant that. It's basically just the title text is too long (and I can't change the text itself, it comes from sources I have no control over).
Alternatively (if customizing what's there isn't an option), is there an easy way to do custom bubbles? I don't really want to have to reinvent the wheel and rewrite the pins themselves and their event handlers, but if it comes down to it (and someone can point me to some code that can get me started, since I know if it's required, someone's done it), then so be it.
iPhone-specific options are fine.
At this moment the latest Titanium SDK gives you such possibilities for annotation bubble customization:
Add subtitle for the bubble (subtitle option). You will see additional text under the title. On Android subtitle can be multiline (using '\n').
Add left and right view to the bubble (leftView\rightView options). You can add custom view to the left or right part of the bubble. And view can consist of different elements (label, image...).
Read more here.
If this is enough for your task - you can use it. But for deeper customization you must create your own view and show it on annotation click event.
I am making a vertical Menu using GWT MenuBar and selection of particular MenuItem shows content on the right, I am trying to make something similar to TabPanel, but with Tabs on left instead of being on top. Now, since I've got the Menu items and actions in place, I want to remove the effect of hovering over and changing color, and keep that menu item selected which was clicked last and whose content is loaded on the right.
I am open to any comments, if you have a better solution to implement this, using some other components(with-in) GWT, please drop in a comment with your suggestions, I'll really appreciate that.
Or if you can just tell me how can I disable this effect, of hovering and sticking to only that selection, That would be awesome too..
Thanks to everyone, taking time to read this and suggesting a solution.
It's all defined in the CSS of your GWT's theme (probably the default one), so it's a matter of overriding those styles - make sure it's not the other way around :) Inspect the code with a tool like Firebug to see what's exactly being set and change that.
Does anyone know of a GWT widget that works like a spelling suggestor?
Ideally it would be similar to this: http://www.polishmywriting.com/
I need a click-triggered popup on user generated text so that I can suggest replacements (I am not building a spell-checker, but something similar). I also really like the way the polishmywriting menu is set up (when you click on an underlined word).
Is there a widget that would allow me to make something similar?
Basically I'm trying to clone the little popups used by spellchecking in Gmail and polishmywriting.
If not, what would be my first step to make it?
Thanks for your time and answers,
DTrejo
Have you had any luck yet? I know it's been quite a lot of time, but found this just now.
It is a very specific widget, so maybe you won't be able to find exactly what you are looking for. In that case, making one from scratch might prove as a challenge.
The first thing you will notice is that a regular gwt TextArea won't do the job of holding the text. You will need something more flexible to dynamically put clickable labels in the text itself.
TinyMCE is a platform independent web based Javascript HTML WYSIWYG editor control, released as Open Source.
http://en.wikipedia.org/wiki/TinyMCE
There is also a gwt wrapper available, so you might find that useful:
http://code.google.com/p/tinymce-gwt/
If you check the polishmywriting editor after the spell checking markup is displayed, you will notice it is not a TextArea. The text is a series of paragraphs and the labeled parts are span elements. This are the elements you can easily access with gwt and put some click handlers there to open the popup.
And for the popups, it shouldn't be difficult. Use a standard gwt PopupPanel. The popup panel can be displayed in a relative position to other elements displayed on the page:
popup.showRelativeTo(otherElement);
If you did find something useful in the mean time, feel free to share.