I am trying to implement brain tumor segmentation on 3D brain MRI(.mha data type).
After preliminary segmentation, I am applying 26-neighbor connected component algorithm(using bwconncomp) to obtain the largest connected component by obtaining the component with the largest volume, following which I need to calculate the centroid of the resultant component.
I am not sure if my method of calculating the largest connected component and the centroid is correct, because the centroid obtained and its nearby voxels all have value 0.
Also I am having confusion with the representation of 3D voxel coordinates. For eg. if centroid=(x,y,z), does it correspond to x=row,y=column and z=2D slice?
Any help would be appreciated. Below is my code with the relevant part.
CC=bwconncomp(Ibin,26); %Input Black & White 3D data of size 240x240x155
Pixelid=regionprops(CC,'PixelIdxList');
[prow pcol]=size(Pixelid);
maxval=numel(Pixelid(1).PixelIdxList);
index=1;
for i=1:prow
number=numel([Pixelid(i).PixelIdxList]);
if (number>maxval) %calculating the component with max number of voxels
maxval=number;
index=i;
end
end
for i=1:prow
if i~=index
Ibin(Pixelid(i).PixelIdxList)=0;
end
end
CC1=bwconncomp(Ibin,26);
Cent=regionprops(CC1,'Centroid');
I changed your code to the following:
CC=bwconncomp(Ibin,26);
PixelIdxList = CC.PixelIdxList;
maxval = numel(PixelIdxList{1});
index = 1;
for ii = 1:length(PixelIdxList)
number = numel(PixelIdxList{ii});
if number > maxval
maxval = number;
index = ii;
end
end
[y,x,z] = ind2sub(size(Ibin),PixelIdxList{index})
centroid = [mean(x), mean(y), mean(z)];
bwconncomp already gives you a PixelIdxList so you don't have to use regionprops. The PixelIdxList lists pixels by their linear indices, so you have to convert them into subscripts to get x, y, and z coordinates. The first dimension in MATLAB matrix represents y coordinates, and second dimension represents x, while the third dimension represents z. Centroid is calculated by taking the mean x, y, and z coordinates of all the pixels contained in the object.
I have a robot leg (3 joints) and I've plotted the maximum range of the end of the leg in a 3D plot using convhull. Now, I want to be able to specify a particular height within that entire workspace and create a 2D plot with X and Y coordinates of all the possible points within the workspace at that height (3D plot works just as well but might be more difficult).
EDIT: Forgot to mention that the data is stored in a 3 by 1088 matrix with coordinates for each row. Also, since the Z coordinate might not match exactly the value I'm looking for, the next closest point works just as well.
Thank you.
If I am interpreting your question correctly, you wish to isolate out points in your matrix that match a particular z coordinate. Failing an exact match, you wish to find the closest z coordinate to your desired query. Also, since your data is stored in a 3 x 1088 matrix, you probably meant to say that each column is a coordinate, not each row.
I'm going to assume that the first, second and third rows denote the x, y and z coordinates of the movement of your robot. The first step would simply be to find the minimum distance between your desired z coordinate with all of those found in the matrix. Once you find that matching coordinate, we simply need to find those z coordinates in your matrix that match, isolate those out and plot only the x and y coordinates. Therefore, assuming your matrix of points is stored in data, and your query z coordinate is stored in queryZ, do something like this:
queryZ = 2.0; %// 1
zPoints = data(3,:); %// 2
[~,loc] = min(abs(queryZ - zPoints)); %// 3
minZ = zPoints(loc); %// 4
ind = data(3,:) == minZ; %// 5
xPoints = data(1,ind); %// 6
yPoints = data(2,ind); %// 7
plot(xPoints, yPoints, 'b.'); %// 8
title(['Points found for ' num2str(minZ)]); %// 9
The first line of code declares a desired z coordinate for you to search for. The next two lines extract out the z coordinates for your data, and then uses min and searches through the z coordinates and finds the location that is closest to your desired z coordinate. We use this location to extract out what the closest z coordinate is (line 4), then find those locations in your data matrix that share this same z coordinate (line 5).
Lastly, these locations are used to filter out the x and y coordinates of your data matrix (lines 6 and 7) and we then plot these points in blue and with dot markers (line 8). As a bonus, we place a title on the plot that shows you what the actual z coordinate was that matched to your query (line 9).
Edit
Given your inquiry in your comments, you would like to find multiple values of z within a particular tolerance for each value. The easiest way would be to do this in a for loop. There are certainly other ways to do this vectorized, but I won't invest the time into doing so. As such, you would have to slightly modify the above formulation and perform the following steps:
For each query point queryZ:
Find the closest point in your data
Search for all z points within a tolerance tol of this point
Add these points to a list
Repeat Step #1 for all query points desired
Plot all of these points for display
As such, the code would look something like this:
%// Step #1
queryZ = [2.0 1.0 -1.0 -2.0]; %// Define desired z points
tol = 0.001; %// Define tolerance here
zPoints = data(3,:); %// Extract out z points
%// Step #2
loc = false(numel(zPoints));
for idx = 1 : numel(queryZ)
z = queryZ(idx); %// Get query point
[~,minInd] = min(abs(z - zPoints)); %// Find closest point to query
minZ = zPoints(minInd);
loc(abs(minZ - zPoints) < tol) = true; %// Find indices within tolerance wrt closest point
%// Set to true
end
%// Step #3
xPoints = data(1,ind); %// 6
yPoints = data(2,ind); %// 7
plot(xPoints, yPoints, 'b.'); %// 8
The first step is self-explanatory. We first define a bunch of z coordinates that you are seeking, define a tolerance for similarity and extract out the z coordinates of your data. Next, for each point in our query set, we find the closest z coordinate to your data, and then with respect to this closest coordinate, we search for points that are within a specified tolerance of this matched point. We use these locations (not the coordinates) to mark into a logical array where true means that this point has met the criteria of being matched and false otherwise. In the end, any locations in the logical array that are set to true means that the corresponding point located at this index has met the criteria to be matched for at least one of the points in your query.
Finally, we use this logical array to index into our data, grab all of the valid points and plot them.
Hope this helps!
I use 2D dataset like below,
37.0235000000000 18.4548000000000
28.4454000000000 15.7814000000000
34.6958000000000 20.9239000000000
26.0374000000000 17.1070000000000
27.1619000000000 17.6757000000000
28.4101000000000 15.9183000000000
33.7340000000000 17.1615000000000
34.7948000000000 18.2695000000000
34.5622000000000 19.3793000000000
36.2884000000000 18.4551000000000
26.1695000000000 16.8195000000000
26.2090000000000 14.2081000000000
26.0264000000000 21.8923000000000
35.8194000000000 18.4811000000000
to create a 3D histogram.
How can I find the histogram value of a point on a grid? For example, if [34.7948000000000 18.2695000000000] point is given, I would like to find the corresponding value of a histogram for a given point on the grid.
I used this code
point = feat_vec(i,:); // take the point given by the data set
X = centers{1}(1,:); // take center of the bins at one dimension
Y = centers{2}(1,:); // take center of the bins at other dim.
distanceX = abs(X-point(1)); // find distance to all bin centers at one dimension
distanceY = abs(Y-point(2)); // find distance to center points of other dimension
[~,indexX] = min(distanceX); // find the index of minimum distant center point
[~,indexY] = min(distanceY); // find the index of minimum distant center point for other dimension
You could use interp2 to accomplish that!
If X (1-D Vector, length N) and Y (1-D vector, length M) determine discrete coordinate on the axes where your histogram has defined values Z (matrix, size M x N). Getting value for one particular point with coordinates (XI, YI) could be done with:
% generate grid
[XM, YM] = meshgrid(X, Y);
% interpolate desired value
ZI = interp2(XM, YM, Z, XI, YI, 'spline')
In general, this kind of problem is interpolation problem. If you would want to get values for multiple points, you would have to generate grid for them in similar fashion done in code above. You could also use another interpolating method, for example linear (refer to linked documentation!)
I think you mean this:
[N,C] = hist3(X,...) returns the positions of the bin centers in a
1-by-2 cell array of numeric vectors, and does not plot the histogram.
That being said, if you have a 2D point x=[x1, x2], you are only to look up the closest points in C, and take the corresponding value in N.
In Matlab code:
[N, C] = hist3(data); % with your data format...
[~,indX] = min(abs(C{1}-x(1)));
[~,indY] = min(abs(C{2}-x(2)));
result = N(indX,indY);
done. (You can make it into your own function say result = hist_val(data, x).)
EDIT:
I just saw, that my answer in essence is just a more detailed version of #Erogol's answer.
I have a closed non-self-intersecting polygon. Its vertices are saved in two vectors X, and Y. Finally the values of X and Y are bound between 0 and 22.
I'd like to construct a matrix of size 22x22 and set the value of each bin equal to true if part of the polygon overlaps with that bin, otherwise false.
My initial thought was to generate a grid of points defined with [a, b] = meshgrid(1:22) and then to use inpolygon to determine which points of the grid were in the polygon.
[a b] = meshgrid(1:22);
inPoly1 = inpolygon(a,b,X,Y);
However this only returns true if if the center of the bin is contained in the polygon, ie it returns the red shape in the image below. However what need is more along the lines of the green shape (although its still an incomplete solution).
To get the green blob I performed four calls to inpolygon. For each comparison I shifted the grid of points either NE, NW, SE, or SW by 1/2. This is equivalent to testing if the corners of a bin are in the polygon.
inPoly2 = inpolygon(a-.5,b-.5,X,Y) | inpolygon(a+.5,b-.5,X,Y) | inpolygon(a-.5,b+5,X,Y) | inpolygon(a+.5,b+.5,X,Y);
While this does provide me with a partial solution it fails in the case when a vertex is contain in a bin but none of the bin corners are.
Is there a more direct way of attacking this problem, with preferably a solution that produces more readable code?
This plot was drawn with:
imagesc(inPoly1 + inPoly2); hold on;
line(a, b, 'w.');
line(X, Y, 'y);
One suggestion is to use the polybool function (not available in 2008b or earlier). It finds the intersection of two polygons and returns resulting vertices (or an empty vector if no vertices exist). To use it here, we iterate (using arrayfun) over all of the squares in your grid check to see whether the output argument to polybool is empty (e.g. no overlap).
N=22;
sqX = repmat([1:N]',1,N);
sqX = sqX(:);
sqY = repmat(1:N,N,1);
sqY = sqY(:);
intersects = arrayfun((#(xs,ys) ...
(~isempty(polybool('intersection',X,Y,[xs-1 xs-1 xs xs],[ys-1 ys ys ys-1])))),...
sqX,sqY);
intersects = reshape(intersects,22,22);
Here is the resulting image:
Code for plotting:
imagesc(.5:1:N-.5,.5:1:N-.5,intersects');
hold on;
plot(X,Y,'w');
for x = 1:N
plot([0 N],[x x],'-k');
plot([x x],[0 N],'-k');
end
hold off;
How about this pseudocode algorithm:
For each pair of points p1=p(i), p2=p(i+1), i = 1..n-1
Find the line passing through p1 and p2
Find every tile this line intersects // See note
Add intersecting tiles to the list of contained tiles
Find the red area using the centers of each tile, and add these to the list of contained tiles
Note: This line will take a tiny bit of effort to implement, but I think there is a fairly straightforward, well-known algorithm for it.
Also, if I was using .NET, I would simply define a rectangle corresponding to each grid tile, and then see which ones intersect the polygon. I don't know if checking intersection is easy in Matlab, however.
I would suggest using poly2mask in the Image Processing Toolbox, it does more or less what you want, I think, and also more or less what youself and Salain has suggested.
Slight improvement
Firstly, to simplify your "partial solution" - what you're doing is just looking at the corners. If instead of considering the 22x22 grid of points, you could consider the 23x23 grid of corners (which will be offset from the smaller grid by (-0.5, -0.5). Once you have that, you can mark the points on the 22x22 grid that have at least one corner in the polygon.
Full solution:
However, what you're really looking for is whether the polygon intersects with the 1x1 box surrounding each pixel. This doesn't necessarily include any of the corners, but it does require that the polygon intersects one of the four sides of the box.
One way you could find the pixels where the polygon intersects with the containing box is with the following algorithm:
For each pair of adjacent points in the polygon, calling them pA and pB:
Calculate rounded Y-values: Round(pA.y) and Round(pB.y)
For each horizontal pixel edge between these two values:
* Solve the simple linear equation to find out at what X-coordinate
the line between pA and pB crosses this edge
* Round the X-coordinate
* Use the rounded X-coordinate to mark the pixels above and below
where it crosses the edge
Do a similar thing for the other axis
So, for example, say we're looking at pA = (1, 1) and pB = (2, 3).
First, we calculated the rounded Y-values: 1 and 3.
Then, we look at the pixel edges between these values: y = 1.5 and y = 2.5 (pixel edges are half-offset from pixels
For each of these, we solve the linear equation to find where pA->pB intersects with our edges. This gives us: x = 1.25, y = 1.5, and x = 1.75, y = 2.5.
For each of these intersections, we take the rounded X-value, and use it to mark the pixels either side of the edge.
x = 1.25 is rounded to 1 (for the edge y = 1.5). We therefore can mark the pixels at (1, 1) and (1, 2) as part of our set.
x = 1.75 is rounded to 2 (for the edge y = 2.5). We therefore can mark the pixels at (2, 2) and (2, 3).
So that's the horizontal edges taken care of. Next, let's look at the vertical ones:
First we calculate the rounded X-values: 1 and 2
Then, we look at the pixel edges. Here, there is only one: x = 1.5.
For this edge, we find the where it meets the line pA->pB. This gives us x = 1.5, y = 2.
For this intersection, we take the rounded Y-value, and use it to mark pixels either side of the edge:
y = 2 is rounded to 2. We therefore can mark the pixels at (1, 2) and (2, 2).
Done!
Well, sort of. This will give you the edges, but it won't fill in the body of the polygon. However, you can just combine these with your previous (red) results to get the complete set.
First I define a low resolution circle for this example
X=11+cos(linspace(0,2*pi,10))*5;
Y=11+sin(linspace(0,2.01*pi,10))*5;
Like your example it fits with in a grid of ~22 units. Then, following your lead, we declare a meshgrid and check if points are in the polygon.
stepSize=0.1;
[a b] = meshgrid(1:stepSize:22);
inPoly1 = inpolygon(a,b,X,Y);
Only difference is that where your original solution took steps of one, this grid can take smaller steps. And finally, to include anything within the "edges" of the squares
inPolyFull=unique( round([a(inPoly1) b(inPoly1)]) ,'rows');
The round simply takes our high resolution grid and rounds the points appropriately to their nearest low resolution equivalents. We then remove all of the duplicates in a vector style or pair-wise fashion by calling unique with the 'rows' qualifier. And that's it
To view the result,
[aOrig bOrig] = meshgrid(1:22);
imagesc(1:stepSize:22,1:stepSize:22,inPoly1); hold on;
plot(X,Y,'y');
plot(aOrig,bOrig,'k.');
plot(inPolyFull(:,1),inPolyFull(:,2),'w.'); hold off;
Changing the stepSize has the expected effect of improving the result at the cost of speed and memory.
If you need the result to be in the same format as the inPoly2 in your example, you can use
inPoly2=zeros(22);
inPoly2(inPolyFull(:,1),inPolyFull(:,2))=1
Hope that helps. I can think of some other ways to go about it, but this seems like the most straightforward.
Well, I guess I am late, though strictly speaking the bounty time was till tomorrow ;). But here goes my attempt. First, a function that marks cells that contain/touch a point. Given a structured grid with spacing lx, ly, and a set of points with coordinates (Xp, Yp), set containing cells:
function cells = mark_cells(lx, ly, Xp, Yp, cells)
% Find cell numbers to which points belong.
% Search by subtracting point coordinates from
% grid coordinates and observing the sign of the result.
% Points lying on edges/grid points are assumed
% to belong to all surrounding cells.
sx=sign(bsxfun(#minus, lx, Xp'));
sy=sign(bsxfun(#minus, ly, Yp'));
cx=diff(sx, 1, 2);
cy=diff(sy, 1, 2);
% for every point, mark the surrounding cells
for i=1:size(cy, 1)
cells(find(cx(i,:)), find(cy(i,:)))=1;
end
end
Now, the rest of the code. For every segment in the polygon (you have to walk through the segments one by one), intersect the segment with the grid lines. Intersection is done carefully, for horizontal and vertical lines separately, using the given grid point coordinates to avoid numerical inaccuracies. For the found intersection points I call mark_cells to mark the surrounding cells to 1:
% example grid
nx=21;
ny=51;
lx = linspace(0, 1, nx);
ly = linspace(0, 1, ny);
dx=1/(nx-1);
dy=1/(ny-1);
cells = zeros(nx-1, ny-1);
% for every line in the polygon...
% Xp and Yp contain start-end points of a single segment
Xp = [0.15 0.61];
Yp = [0.1 0.78];
% line equation
slope = diff(Yp)/diff(Xp);
inter = Yp(1) - (slope*Xp(1));
if isinf(slope)
% SPECIAL CASE: vertical polygon segments
% intersect horizontal grid lines
ymax = 1+floor(max(Yp)/dy);
ymin = 1+ceil(min(Yp)/dy);
x=repmat(Xp(1), 1, ymax-ymin+1);
y=ly(ymin:ymax);
cells = mark_cells(lx, ly, x, y, cells);
else
% SPECIAL CASE: not horizontal polygon segments
if slope ~= 0
% intersect horizontal grid lines
ymax = 1+floor(max(Yp)/dy);
ymin = 1+ceil(min(Yp)/dy);
xmax = (ly(ymax)-inter)/slope;
xmin = (ly(ymin)-inter)/slope;
% interpolate in x...
x=linspace(xmin, xmax, ymax-ymin+1);
% use exact grid point y-coordinates!
y=ly(ymin:ymax);
cells = mark_cells(lx, ly, x, y, cells);
end
% intersect vertical grid lines
xmax = 1+floor(max(Xp)/dx);
xmin = 1+ceil(min(Xp)/dx);
% interpolate in y...
ymax = inter+slope*lx(xmax);
ymin = inter+slope*lx(xmin);
% use exact grid point x-coordinates!
x=lx(xmin:xmax);
y=linspace(ymin, ymax, xmax-xmin+1);
cells = mark_cells(lx, ly, x, y, cells);
end
Output for the example mesh/segment:
Walking through all polygon segments gives you the polygon 'halo'. Finally, the interior of the polygon is obtained using standard inpolygon function. Let me know if you need more details about the code.
I need to generate N random coordinates for a 2D plane. The distance between any two points are given (number of distance is N(N - 1) / 2). For example, say I need to generate 3 points i.e. A, B, C. I have the distance between pair of them i.e. distAB, distAC and distBC.
Is there any built-in function in MATLAB that can do this? Basically, I'm looking for something that is the reverse of pdist() function.
My initial idea was to choose a point (say A is the origin). Then, I can randomly find B and C being on two different circles with radii distAB and distAC. But then the distance between B and C might not satisfy distBC and I'm not sure how to proceed if this happens. And I think this approach will get very complicated if N is a large number.
Elaborating on Ansaris answer I produced the following. It assumes a valid distance matrix provided, calculates positions in 2D based on cmdscale, does a random rotation (random translation could be added also), and visualizes the results:
%Distance matrix
D = [0 2 3; ...
2 0 4; ...
3 4 0];
%Generate point coordinates based on distance matrix
Y = cmdscale(D);
[nPoints dim] = size(Y);
%Add random rotation
randTheta = 2*pi*rand(1);
Rot = [cos(randTheta) -sin(randTheta); sin(randTheta) cos(randTheta) ];
Y = Y*Rot;
%Visualization
figure(1);clf;
plot(Y(:,1),Y(:,2),'.','markersize',20)
hold on;t=0:.01:2*pi;
for r = 1 : nPoints - 1
for c = r+1 : nPoints
plot(Y(r,1)+D(r,c)*sin(t),Y(r,2)+D(r,c)*cos(t));
plot(Y(c,1)+D(r,c)*sin(t),Y(c,2)+D(r,c)*cos(t));
end
end
You want to use a technique called classical multidimensional scaling. It will work fine and losslessly if the distances you have correspond to distances between valid points in 2-D. Luckily there is a function in MATLAB that does exactly this: cmdscale. Once you run this function on your distance matrix, you can treat the first two columns in the first output argument as the points you need.