I am trying to create the jms-topic in JBOSS 6.0.1 version using command line interface of jboss .
I am able to do it on standalone server but issues arises when i run command on cluster environment.
Here is what i do:
Standalone server command:
jms-topic add --topic-address=java:/com.matrix.jms.samp.imp.solution.topic.ReplyTopic --entries=java:/com.matrix.jms.samp.imp.solution.topic.ReplyTopic
Exectues succesfully
Now when i run same command on cluster environment of jboss it ask me to give profile. I give profile and execute this command:
jms-topic add --profile=hornetq-server --topic-address=java:/com.matrix.jms.samp.imp.solution.topic.ReplyTopic --entries=java:/com.matrix.jms.samp.imp.solution.topic.ReplyTopic
It gives me following error,
JBAS014766: Resource [("profile" => "hornetq-server")] does not exist; a resource at address [
("profile" => "hornetq-server"),
("subsystem" => "messaging"),
("hornetq-server" => "default"),
("jms-topic" => "java:/com.matrix.jms.samp.imp.solution.topic.ReplyTopic")
] cannot be created until all ancestor resources have been added
Is my profile name wrong . I am able to create topic from jboss management console.
Please suggest
Related
I am trying to run JBeret Batch on a Wildfly Domain Cluster locally, but I keep getting the error
"WFLYCTL0030: No resource definition is registered for address [ (\"deployment\" => \"ExampleJob.war\"), (\"subsystem\" => \"batch-jberet\") ]"
To host the cluster I tried to use the default configuration. I am using Wildfly 26.1.3 .
To run my setup I am using this commands on my windows machine to run the Master and Slave.
.\bin\domain.bat --host-config=host-master.xml -Djboss.domain.base.dir=domain1
and
.\bin\domain.bat --host-config=host-slave.xml -Djboss.domain.base.dir=host1 -Djboss.domain.master.address=127.0.0.1 -Djboss.management.http.port=9991
After That I deploy any batch application and try to run it in the adminpanel and get the error.
I tried also to use the cli, which didnt change anything.
I also tried to run it without the base.dir config so it uses the same folder but that did not change something.
I also tried to run different JDKs (I am now using JDK11).
To test that it is not working I tried this job from jberet directly. Also I tried other example Jobs like csv2json and keep getting the same error.
In Standalone the example jobs work.
I'm trying to create a new SSH container to an existing fabric and It was successfully created using this command:
fabric:container-create-ssh --proxy-uri http://"root-container":8181/maven/download/ --jvm-opts "-Xms1024m -XX:MaxPermSize=1024m -Xmx2014m -Djavax.net.debug=ssl" --path /app/testing/ --host "testIP" --private-key ~/.ssh/id_rsa --profile default --profile anotherprofile --resolver localhostname --zookeeper-password "zookeepr pass" testing-container
The problem is that once i created this new container all the existing ssh container changes their maven download/upload proxy to the above container IP
so instead of using http://"currentroot":8181/maven/download/ to http://testIP:8181/maven/download/
i tried a lot to change the maven proxy from the "root-container" fabric profile and default profile but still couldn't reach a solution?
Is there a missing step that i should take to solve this issue in adding a new ssh container without updating the existing maven repo?
It depends on what is anotherprofile
http://host:port/maven/download/ URIs are registered in Zookeeper registry that's used by fabric environment.
fabric-maven-proxy feature, which is declared in fabric profile is the feature that's responsible for starting a maven proxy inside any container that has this feature/profile installed. Please check if your new container has this feature installed. Maybe anotherprofile has fabric profile set as parent?
How containers use remote repositories
Each container, when provisioned by fabric-agent, uses io.fabric8.agent PID configuration (OSGi configuration admin) and the property is org.ops4j.pax.url.mvn.repositories. It contains a list of remote repositories that are searched for artifacts to install in container.
But there's some dynamism involved too. Fabric agent always searches Zookeeper registry and finds URIs that are registered by other containers that run the above mentioned feature (fabric-maven-proxy). All such discovered URIs are prepended to the list found in org.ops4j.pax.url.mvn.repositories property.
How to check maven problem in logs
If you add karaf profile to a container, you'll have logging configuration available in org.ops4j.pax.logging PID - you can nicely configure it in hawtio. By default, there's commented section like this:
# help with identification of maven-related problems with fabric-maven
#log4j.logger.org.eclipse.aether = TRACE
#log4j.logger.org.apache.http.headers = DEBUG
#log4j.logger.io.fabric8.maven.util = TRACE
#log4j.logger.io.fabric8.maven.url = TRACE
#log4j.logger.io.fabric8.agent.download = DEBUG
You can uncomment these to see (much) more information about how maven repositories are used.
I am trying to setup App Fabric on a Windows Puppet Agent. I have the following configuration:
Linux Puppet Master (CentOS 6.5)
Windows Puppet Agent (Windows Server 2008 R2)
Puppet version 3.8.2
I am using the following manifest to insure that App Fabric is installed:
# This is the init.pp manifest file for the appfabric module
class appfabric {
# TODO: Get the setup path from Hiera
$setup_base_directory = 'D:/Setups/'
$setup_path = "${setup_base_directory}WindowsServerAppFabricSetup_x64.exe"
$hotfix_path = "${setup_base_directory}AppFabric1.1-KB2932678-x64-ENU.exe"
# Pull down the setup of AppFabric
file {$setup_path:
ensure => file,
source_permissions => ignore,
source => 'puppet:///modules/appfabric/WindowsServerAppFabricSetup_x64.exe',
}
->
# Pull down the setup of hotfix update 5
file {$hotfix_path:
ensure => file,
source_permissions => ignore,
source => 'puppet:///modules/appfabric/AppFabric1.1-KB2932678-x64-ENU.exe',
}
->
# Install AppFabric 1.1
package {'AppFabric 1.1 for Windows Server':
ensure => present,
source => $setup_path,
install_options => ['/i','/SkipUpdates'],
}
->
# Install Hotfix KB2932678
package {'AppFabric 1.1 HotFix install':
ensure => present,
source => $hotfix_path,
install_options => ['/q','/norestart'],
}
->
# Start the remote registry service
service {'Remote Registry Service':
ensure => running,
name => 'RemoteRegistry',
enable => true,
}
->
# Start the app fabric service
service {'App Fabric Service':
ensure => running,
name => 'AppFabricCachingService',
enable => true,
}
}
I am facing the following issues:
I am not able to change the log on user for the AppFabricCachingService to NT Authority\System (Local System account) or any other specific user.
When I run the command puppet agent --test on the Windows Puppet Agent then puppet tries to install App Fabric everytime. I am trying to write manifest with which I can make sure that in case App Fabric is already installed then puppet should not attempt to re-install.
I am new to the Puppet Configuration Management and any help would be great.
Thanks in advance.
For your second issue, make sure the name of the package (in your case, you are specifying "AppFabric 1.1 for Windows Server") matches the name that appears in Windows Add\Remove programs menu. Otherwise Puppet will reinstall every time.
You might want to take a look at Package on Windows documentation page.
According to that page:
The easiest way to determine a package’s DisplayName is to:
Install the package on an example system.
Run puppet resource package to see a list of installed packages.
Locate the package you just installed, and copy the name that puppet resource reported for it.
If the software you are installing does not show up in the programs list, my recommendation would be to not use package. Instead, use exec to install it and add a creates clause to run the installer only if a file in a specific location belonging to the software is not found, or unless to perform a free-form check (registry, attempt to execute the software and check the version, etc.)
I installed Cloud Foundry v2 Nise Installer (with cf-release ea61ec6f8f, VirtualBox)
and successfully pushed 'hello' application with 2 built-in services(mysql and postgresql).
1) How can I add more managed services, e.g. 'echo', 'mongodb' (existing under cf-release/src/services)?
2) I also installed cf_nise_services on the different VM (VirtualBox) but I do not understand how to connect both VMs to deploy services.
I tried to add my service via (on VM1)
create-service-plan/create-plan/create-service-auth-token
I got an error after (at the very end)
cf create-service
CFoundry::MessageParseError: 1001: Request invalid due to parse error: Decoded JSON cannot be nil
Or
HTTP 404
My service does not respond correctly?
Thank you!
The branch ea61ec6f8f is too old and not maintained any longer.
cf_nise_installer_services is, unfortunately, not maintained now. I'll delete it from the README later.
Please try cf-mysql-broker.
Iwasaki Yudai
Are there any simple ways to see what wars have been deployed in Jboss AS and undeploy some of them? I want to do this from the command line.
I tried using jmx but I keep getting exception saying "org.jboss.util.NestedRuntimeException: jmx not bound;" I'd prefer to do it in a way where I don't have to stop and start the application server.
You can approach this in three ways in JBoss Application Server 7:
Management Console
Management CLI
Deployment folder
Management Console
Being a GUI, the Management Console is the most visual of the three, and you can see the list of deployed applications under the Deployment window. You have the option to Disable and Remove the deployed applications listed here. This screenshot is from AS7.0.2, and some windows have and will change with the addition of tabs, but the general functionality remains the same.
Management CLI
The Management Command Line Interface is a new addition to AS7. The CLI exposes a lot of low-level functionality, and is a powerful tool once you get familiar with the commands and operations. As you might expect, you can run help to show the commands, or run <commandname> --help for more information on a specific command. Two useful commands are deploy and undeploy, so let's look at their help information. I'll give Linux examples, but you can insert your flavour of OS as required.
Here's deploy:
[standalone#localhost:9999 /] deploy --help
SYNOPSIS
deploy (file_path [--name=deployment_name] [--runtime_name=deployment_runtime_name] [--force] | --name=deployment_name) [--server-groups=group_name (,group_name)* | --all-server-groups]
DESCRIPTION
Deploys the application designated by the file_path or enables an already existing
but disabled in the repository deployment designated by the name argument.
If executed w/o arguments, will list all the existing deployments.
ARGUMENTS
file_path - the path to the application to deploy. Required in case the deployment
doesn't exist in the repository.
The path can be either absolute or relative to the current directory.
--name - the unique name of the deployment. If the file path argument is specified
the name argument is optional with the file name been the default value.
If the file path argument isn't specified then the command is supposed to
enable an already existing but disabled deployment, and in this case the
name argument is required.
--runtime_name - optional, the runtime name for the deployment.
--force - if the deployment with the specified name already exists, by default,
deploy will be aborted and the corresponding message will printed.
Switch --force (or -f) will force the replacement of the existing deployment
with the one specified in the command arguments.
--server-groups - comma separated list of server group names the deploy command should apply to.
Either server-groups or all-server-groups is required in the domain mode.
This argument is not applicable in the standalone mode.
--all-server-groups - indicates that deploy should apply to all the available server groups.
Either server-groups or all-server-groups is required in domain mode.
This argument is not applicable in the standalone mode.
-l - in case none of the required arguments is specified the command will
print all of the existing deployments in the repository. The presence of the -l switch
will make the existing deployments printed one deployment per line, instead of
in columns (the default).
And here's undeploy:
[standalone#localhost:9999 /] undeploy --help
SYNOPSIS
undeploy name [--server-groups=group_name (,group_name)* | --all-relevant-server-groups] [--keep-content]
DESCRIPTION
Undeploys the deployment with the given name and, depending on the arguments, removes
its content from the repository.
If the deployment name isn't specified, prints the list of all the existing deployments.
ARGUMENTS
name - the name of the deployment to undeploy.
--server-groups - comma separated list of server group names the undeploy command should apply to.
Either server-groups or all-relevant-server-groups is required in the domain mode.
This argument is not applicable in the standalone mode.
--all-relevant-server-groups - indicates that undeploy should apply to all the server groups
in which the deployment is enabled.
Either server-groups or all-relevant-server-groups is required in domain mode.
This argument is not applicable in the standalone mode.
--keep-content - by default undeploy, besides disabling the deployment, also removes its
content from the repository. The presence of --keep-content will only disable
the deployment w/o removing its content from the repository.
This argument can be used in both standalone and domain modes.
-l - in case the deployment name isn't specified, the presence of the -l switch
will make the existing deployments printed one deployment per line, instead of
in columns (the default).
The CLI In Action
Running the deploy or undeploy command without any arguments will list all the applications available. So your workflow to log in to the CLI and undeploy an application would be like this (simplified):
Change directory from EAP_HOME to the bin folder:
[user#home EAP_HOME]$ cd bin
Run the CLI logon script:
[user#host bin]$ ./jboss-admin.sh
You are disconnected at the moment. Type 'connect' to connect to the server or 'help' for the list of supported commands.
Instruct the API to connect (this can also be passed at runtime as ./jboss-admin.sh --connect).
[disconnected /] connect
Connected to standalone controller at localhost:9999
Run the undeploy command to display available applications.
[standalone#localhost:9999 /] undeploy
test.ear
Run the undeploy command to undeploy the application. In this case, the test.ear.
[standalone#localhost:9999 /] undeploy test.ear
Successfully undeployed test.ear.
Deployment Folder
If you are running an instance of AS7 as a development tool, and are using the deployment folder, you can simply delete the application. You will notice that a marker file is created, such as test.ear.failed, to signify the status of the application deployment.
With JBoss Application Server it's possible handle deployment with plain file operations on wars/ears in deploy dir.
Just ls to enumerate, delete to undeploy, copy to deploy and touch to redeploy. No server restart required.
Also for the newest version of JBoss Application Server 7 you can use CLI.
You can also try CLI GUI. The Deployments-->Undeploy menu option provides a pick list of deployments. A couple of clicks and you are done.
See https://community.jboss.org/wiki/AGUIForTheCommandLineInterface
You dont have to restart the JBOSS server if you remove the WAR and EAR the application gets undeployed .
The article (http://docs.jboss.org/jbossas/docs/Clustering_Guide/4/html/clustering-intro-farm.html ) gives the perfect explanation of how it works.
Let all know if you have any questions about it .
We have been doing the development on Jboss the same way in our DEV , QA and Prod environment and have not faced any issues with it so-far.