I'm looking for a way to create a new csv file each time the job is triggered. Every time the job is triggered it needs to create a new file like DataProject"projectnumber".csv in a certain folder (always the same folder)
But I cannot found the way to accomplish this.
Currently my approach is to store everything in a sql table and create the file from there but I'm actually looking for a way to do it from Scribe.
I don't think that this can be done in Scribe Insight.
I've done something similar where I've used Scribe to create the file, and then some VBScript to rename it.
Mike
Related
For instance
File A Loaded then next day
File B Loaded then next day
This time Again, File A received this time sequence should be abort
Can anyone help me out with this
Thanks
There are multiple ways to solve this, but please don't do intentionally aborts as they're most likely boomerangs.
Keep track of filenames and file hashes (like MD5sum) in a table and compare the list before loading. If the file is known, handle/ignore it.
Just read the file again as if it was new or updated. Compare old data with new data using the Change Capture stage, handle data as needed, e.g. write changed and new data to target. (recommended)
I would not recommend writing a sequence that "should abort" as this is not the goal of an ETL process. If the file contains the very same content that is already known, just ignore it. If it has updated data, handle it as needed. Only abort, if there is a technical issue, e.g. the file given is wrong formatted. An abort of a job should indicate that something is wrong with the job. When you get a file twice, then it's not the job that failed.
If an error was found in the data that needs to be fixed by others, write the information about it to a table. Have a another independend process monitoring that table to tell the data producer about it (via dashboard, email,...).
I am copying data from sql to adls dynamically, i want to rename the file name after copied into ADLS. How to achieve it? Requesting you suggest.
Thanks in Advance.
Regards,
Ashok
My first question would be "why bother renaming parquet files?" Hopefully you aren't generating a single parquet file, which would seem to defeat the purpose of using Parquet. Instead, my focus would be on the folder name.
OPTION 1
If I did care about the file names, I would use Data Flow and configure the Sink to use patterned naming:
You could then pass the desired file name in as Data Flow Parameter:
And set it dynamically using an expression:
[NOTE: I haven't tested this syntax, but I recommend you always use the Expression Builder to enter these expressions].
OPTION 2
If none of that suits your purposes, then aonther option would be brute force. Use a COPY activity with binary data sets to copy the file to a new file with the desired name, then a DELETE activity to remove the old one.
I have a azure blob container where some json files with data gets put every 6 hours and I want to use Azure Data Factory to copy it to an Azure SQL DB. The file pattern for the files are like this: "customer_year_month_day_hour_min_sec.json.data.json"
The blob container also has other json data files as well so I have filter for the files in the dataset.
First question is how can I set the file path on the blob dataset to only look for the json files that I want? I tried with the wildcard *.data.json but that doesn't work. The only filename wildcard I have gotten to work is *.json
Second question is how can I copy data only from the new files (with the specific file pattern) that lands in the blob storage to Azure SQL? I have no control of the process that puts the data in the blob container and cannot move the files to another location which makes it harder.
Please help.
You could use ADF event trigger to achieve this.
Define your event trigger as 'blob created' and specify the blobPathBeginsWith and blobPathEndsWith property based on your filename pattern.
For the first question, when an event trigger fires for a specific blob, the event captures the folder path and file name of the blob into the properties #triggerBody().folderPath and #triggerBody().fileName. You need to map the properties to pipeline parameters and pass #pipeline.parameters.parameterName expression to your fileName in copy activity.
This also answers the second question, each time the trigger is fired, you'll get the fileName of the newest created files in #triggerBody().folderPath and #triggerBody().fileName.
Thanks.
I understand your situation. Seems they've used a new platform to recreate a decades old problem. :)
The patter I would setup first looks something like:
Create a Storage Account Trigger that will fire on every new file in the source container.
In the triggered Pipeline, examine the blog name to see if it fits your parameters. If no, just end, taking no action. If so, binary copy the blob to a account/container your app owns, leaving the original in place.
Create another Trigger on your container that runs the import Pipeline.
Run your import process.
Couple caveats your management has to understand. You can be very, very reliable, but cannot guarantee compliance because there is no transaction/contract between you and the source container. Also, there may be a sequence gap since a small file can usually process while a larger file is processing.
If for any reason you do miss a file, all you need to do is copy it to your container where your process will pick it up. You can load all previous blobs in the same way.
I have configured a Stream Analytics Jobs so that input data goes to an Azure Data Lake repository every hour.
Sometimes there is no event to track, so no output. But my Data Factory goes in error because the file doesn't exist.
I wonder if exist a way to force empty file out from Stream Analytics?
Many thanks!
You can look at our common query patterns here. In particular I think you can use the one named "fill missing values" to generate some events regularly, even when there is no input.
Let me know if it works for you.
Thanks!
JS
Are you using ADF v2?
I didn't find anything inbuilt in ADF to come up with it.
But I can see few workarounds - starting from simplest one:
In your ASA query, you can use WITH statement and union your input with a fake empty message. - Then there will be always output
As a second output in ASA job you can store in some DB info whenever a file was produced. Then in ADF you can check whenever there are files and run copy conditionally.
In ADF run web activity e.g. LogicApp/FunctionApp to get info whenever files in container exist.
Find the way to do it...
I had an activity using the data lake analytics, what I do is to run an U-SQL than read data with no transformation and write it to the output with headers.
In that way the activity always write an output file!
Very easy!
I'm wondering how to increment a number "extracted" from a field in a csv, and then rewrite the file with the number incremented.
I need this counter in a tMap.
Is the design below a good way to do it ?
EDIT: im trying a new method. see the design of my subjob below, but i have an error when i link the tjavarow to my main tmap in the main job
Exception in component tMap_1
java.lang.NullPointerException
at mod_file_02.file_02_0_1.FILE_02.tFileList_1Process(FILE_02.java:9157)
at mod_file_02.file_02_0_1.FILE_02.tRowGenerator_5Process(FILE_02.java:8226)
at mod_file_02.file_02_0_1.FILE_02.tFileInputDelimited_2Process(FILE_02.java:7340)
at mod_file_02.file_02_0_1.FILE_02.runJobInTOS(FILE_02.java:12170)
at mod_file_02.file_02_0_1.FILE_02.main(FILE_02.java:11954)
2014-08-07 12:43:35|bm9aSI|bm9aSI|bm9aSI|MOD_FILE_02|FILE_02|Default|6|Java
Exception|tMap_1|java.lang.NullPointerException:null|1
[statistics] disconnected
enter image description here
You should be able to do this mid flow in a tMap or a tJavaRow.
Simply read the number in as an integer (or other numeric data type) and then add your increment to it.
A really simple example might look like this:
Here we have a tFixedFlowInput that has some hard coded values for the job:
And we run it through a tMap where we add 1 to the age column:
And finally, we output it to the console in a table:
EDIT:
As Gabriele B has pointed out, this doesn't exactly work when reading and writing to the same flat file as Talend claims an exclusive read-write lock on the file when reading and keeps it open throughout the job.
Instead you would have to write the incremented data to some other place such as a temporary file, a database or even just to the buffer and then read that data in to a separate job which would then output the file you want and clean up anything temporary.
The problem with that is you can't do the output in the same process. I've just tried testing reading in the file in one child job, passing the data back to a parent job using a tBufferOutput and then passing that data to another child job as a context variable and then trying to output to the file. Unfortunately the file lock remains on it so you can't do this all in one self contain job (even using a parent job and several child jobs).
If this sounds horrible to you (it is) and you absolutely need this to happen (I'd suggest a database table sounds like a better match for this functionality than a flat file) then you could raise a feature request on the Talend Jira for the tFileInputDelimited to not hold the file open or to not insist on an exclusive read-write lock on the file.
Once again, I strongly recommend that you move to using a database table for this because even without the file lock issue, this is definitely not the right use of a flat file and this use case perfectly fits a database, even something as lightweight as an embedded H2 database.