I am newbie using Gerrit review flow and previously had good experience in GitHub and GitLab.
But looks Gerrit review system works bit different.
So I have created one feature branch called feature/test. This branch contains one test commit and this commit has been pushed to Gerrit.
Change can be seen Gerrit with unique change id and commit.
Now the problem is, on this feature branch 3 developers will work and they need to continuously fetch each other changes with same change id.
Can someone help on this, what I need to do. because when I pulled this feature branch with one test commit then change is not visible to me at different place.
I didn't understand what you mean by "fetch each other changes WITH SAME CHANGE ID". A Change-Id is a unique number that identifies a change in Gerrit. Each change made by each developer will have different Change-Ids.
The better process to work on Gerrit is the following:
1- Update the local repository
git fetch
2- Create a work branch based on the remote branch:
git checkout -b work1 origin/feature/test
3- Make your change and commit
git add
git commit
4- Push your change to review on Gerrit:
git push origin HEAD:refs/for/feature/test
If the reviewer suggests something to do:
1- Checkout the work branch
git checkout work1
2- Fix your change and commit
git add
git commit --amend
3- Push the fix to Gerrit:
git push origin HEAD:refs/for/feature/test
All developers can work in parallel using the same process. You can also work in parallel by creating other work branches (work2, work3, etc) while is waiting for review. Avoid serializing the commits by always basing your work branches in the remote branch and not in your previous work branch.
When the feature branch is read, it can be merged in the master (main, release, or whatever it is called) branch.
The normal GitHub flow to contribute to a repo is to create a fork of the upstream, clone a local copy where you make changes, then push back up to your fork and then create a PR to have your changes merged into upstream.
But if upstream changes after that, how do you update your fork without creating a merge commit (and also without using the git CLI)?
I already know how to do this in a way that will create a merge commit or which depend on the git command line interface. This question is specifically about using the GitHub.com website or GitHub Desktop application only (no CLI).
Since this is a very common workflow it seems like there should be some simple way to do it using the GitHub GUI.
To reiterate: any answers that use the CLI or create a merge commit (e.g. this way) will not be answering this question since I'm explicitly looking for a non-CLI solution.
without a merge commit or using CLI?
Not directly with GitHub web UI alone, since it would involve rebasing your PR branch on top of upstream/master
So in short: no.
But in less short... maybe, if you really want to try it.
Rebasing through GitHub web UI is actually possible, since Sept. 2016, ...
if you are the maintainer of the original repo, wanting to integrate a PR branch
if none of the replayed commit introduces a conflict
(This differs from GitHub Desktop, which, since June 5th 2019 does support rebasing. But that is a frontend to Git CLI, like other tools provide. For example GitKraken and interactive rebase)
So a convoluted workaround would be:
to fetch, then push upstream/master to the master branch of your own fork (a CLI operation, but more on that below)
change the base branch of your current PR to master (so a PR within the same repository: your own fork), provided you haven't pushed to master.
Meaning: master in your fork represents the updated upstream/master, with upstream being the original repository that you have forked.
Since you are the owner of that repository (your fork), GitHub can then show you if you can rebase said branch to the base branch of the PR (master), but only if there is no conflict.
finally, change the base branch again, to <originalRepo>/master (which is the intended target of your PR)
The very first step is typically done through command line, but... there might be a trick to do it (update upstream master in your fork) through web UI: see "Quick Tip: Sync a Fork with the Original via GitHub’s Web UI" by Bruno Skvorc
In short, it involves:
creating a new branch from your current master (which would be at upstream/master at the time you forked the original repository)
Making a PR with that new branch and <originalRepo/master>
doing a base switch before creating the PR
That is the step which artificially forces upstream/master to be refreshed
You can the create and merge it with the “Merge Pull Request” button (and “Confirm Merge” afterwards): the merge will be trivial: no merge commit.
The end result is: your own master branch (in your fork) updated with upstream/master (the master branch of the original repository)!
You can then resume the steps I describe above, and change the base of your current PR to your own (now refreshed) master branch, and see if you can rebase it!
This is feasible with GitHub Desktop since version 1.0.7 considering the following:
If the current branch does not have any commits ahead upstream (the original repo of the fork), the new commits can be pulled without creating a new merge commit
In GitHub Desktop:
Clone your repository from File > Clone Repository
Fetch origin, which will automatically fetch the upstream as well
Go to Branches by clicking on where it says Current Branch
Click on Choose a branch to merge into <branch> at the bottom
Search for upstream/<branch>, then click Merge upstream/<branch> into <branch>
Push to origin, et voilà!
Otherwise, ff the current branch has commits ahead of the fork, then of course one has to create a merge commit or rebase and force push. For rebasing which might be more preferable, do the following:
In GItHub Desktop, go to Branch from menu, then Rebase Current Branch
Search for upstream/<branch>, then click Start Rebase
Solve any conflicts that have occurred from the rebase
Force push to origin. You will get a warning for this for obvious reasons.
For avoiding force-pushing to your work when your current branch is both ahead and behind its upstream counterpart, either create a new merge commit or:
Make a new branch based with all your changes
If needed, reset the original branch to its original state (before it diverged from the original repo)
Perform the steps from the first scenario and merge your changes into your branch.
And yes, it seems that pulling via the GitHub website from the original repo without creating a pull request and merge commit is not possible at this moment.
Demo GIF for first scenario: https://imgur.com/a/8wci2yf
Some GitHub issues related to this:
Add an upstream to forked repositories
multi-remote support in Desktop
Update
Note: Non-CLI based approach that might help:
Is there a way to make GitHub Desktop rebase a branch against master?
The only key here is doing a rebase, so the above answer should help.
CLI way (which is easier and using git, so it should be more comprehensive by default)
There are some practices that you should use to avoid this.
Don't work on the master branch in your fork.
$ git clone <your fork>
$ git checkout -b feature_branch
You can work in your feature_branch and then raise a Pull Request.
Once your changes are merged in the upstream master, you can pull from upstream to your origin. Since the master on upstream will have your commits sitting neatly on top of it, there won't be a merge commit.
$ git checkout master
$ git pull upstream master
$ git push origin master
In the case, where the maintainer has diverged from the master that you have in your fork, that is, it's not linear any more, you need to pull a fresh copy of it. That should not be a problem as your changes are already in the upstream.
If the master in upstream has moved ahead while you were working on your PR, then you can rebase on you feature_branch.
$ git checkout master
$ git pull upstream master
$ git push origin master
$ git checkout feature_branch
$ git rebase master
Please refer to this document for detailed reference: Fork and pull request workflow
I config Jenkins deploy PHP app by trigger the script deployment whenever developers pushed their code to Github with domain .mydomain.com. If developer create new branch and push some changes to that branch, it works perfectly fine, the strange thing is when developer create new branch and push to server (don't change anything just
create new branch and push) it doesn't trigger the script deployment.
Could you please help?
In Git configuration there is a field Branch Specifier (blank for default): if you put there ** it will build all branches from all remotes.
But if you are creating a new branch and push to server it won't trigger the job. As Github plugin in Jenkins configuration is monitoring the changes in the repo and creating a branch is not a change. So the job won't trigger for that branch until you do a commit in that branch. And I feel this is the correct behavior.
For example when you do a commit xxxx on branch master, your job
gets triggered with commit id xxxx. Now you create a branch say
branch1 from master and you push to server. As you can see there is
not difference between commit xxxx and branch1 so there is no need
to build branch1 in Jenkins.
When using eclipse and I want to Commit / Push changes, using the Git Staging view I can hit commit, then on the Git repositories view push the branch to the remote branch. However when I hit Commit and Push it creates a new branch? The local branch is called master and the remove is origin/HEAD, and the new remote created is origin/master. The default branch is origin/HEAD. I've been Commit and Pushing to the default until today.
I've been searching for an answer for a while but I couldn't really find one, sorry if this is a duplicate.
It didn't [say that the current branch is NO-HEAD]. In the history it says it is HEAD "refs/heads/master" if that's helpful?
HEAD isn't a separate branch. It's just a pointer to the branch that is currently checked out.
I made two changes on a project in GitHub (two commits). How can I create two different pull requests from my changes?
I only found a way to create one big pull request that includes all my changes: https://github.com/tcatm/ffmap-d3/pull/22
You can easily solve this with the SmartGit/hg GUI:
open the log of the master branch
right-click on the first revision from the time, you forked the main project and create a new branch from there
switch into that branch in the left bottom corner with right-click
cherry-pick the revisions you want to make a separate pull request and commit them as one commit
push your new branch up on GitHub
there you can create a pull request from just that branch
for the second pull request, you create a new branch and do the same with it
Here are some screenshots taken from the Mac OSX version of the GitHub desktop program.
Here I am making the first commit, but you can see both changes have been made prior to the commit:
Here I am making the second commit:
Here you can see that each commit was accepted individually:
Note: Some names have been blanked out for privacy.
Assuming that the Windows version of GitHub has the same options, I would download the desktop program and try that.
Create a new branch:
git checkout master
git checkout -b mybranch
... make changes ...
git add myfile
git commit
git push -u origin mybranch
Then create a pull request and change the last compare button on github to mybranch