I am new to Visual Studio. I just installed Visual Studio Code (VSCODE). First time, I opened it and trying to install the extension for powershell. But, when I go to the Extensions tab, it gave an error that the proxy settings were not configured.
The pop up gave an option to 'Open User Settings' and it opened an editor.
As per my understanding, I wrote the following two lines in the User Settings file.
Our internal proxy server requires user authentication. How and where will I put the user credentials. I think, I am getting the error because I have not specified the user details.
Found out how.
The proxy details should be given in the following format. I was using the wrong format earlier.
My settings file looked something similar to below.
// Place your settings in this file to overwrite the default settings
{
"http.proxy": "http://user#domain.local:Password456#10.201.10.200:8080",
"http.proxyStrictSSL": false
}
The domain user name was domain\user, and it was provided in the user FQDN format
Password456 is the login password for the user
10.201.10.200:8080 is the proxy server
Hope this would help someone at some point of time.
I solved this problem like #Tom Jacob Chirayil, but I had to do a little extra. Here are the steps I followed:
Find your proxy server first by going to http://wpad/wpad.dat. My company's configuration had a bunch of proxy servers, and the one that I used was at the very bottom, in this format:
return "PROXY subdomain.company.com:port";
Then click on the Open User Settings button, and add the following line to the settings.json file to the right, within the braces:
"http.proxy": "http://subdomain.company.com:port"
NB: I had to add http:// to the front of the proxy address that I pulled from wpad.dat.
Then save settings.json, restart VS Code. (IDK for sure if you have to restart VS Code or not.)
Just to add a point, it seems that the new release (1.5.1) came with this issue. People on Mac, Linux or Windows suffering with "econnrefused" error in VSCode.
The new version (1.5.2) will have a fix for this, until then, we can use the nightly version.
Source: https://github.com/Microsoft/vscode/issues/11774
I have an Eclipse workspace with a Web App (lets call it MyApp), and Tomcat server. When I run MyApp, Tomcat finds default.jsp and the opening page displays
http://localhost:8080/MyApp/Default.jsp?ActionPage=dashboard
- all fine and dandy.
This web page shows a menu. I choose a menu option from this page which should render
http://localhost:8080/MyApp/config.jsp,
and I get a HTTP Status 404 - /config.jsp ... ie it is looking for the page at
http://localhost:8080/config.jsp
and can't find it. Why is it looking there? It seems to have lost its context.
Netbeans doesn't exhibit this behaviour - it works fine. I just don't know where to look for a solution. Is it the Tomcat configuration or the Web App configuration?
All suggestions welcome!
When you choose your menu option, how is the URL called : simple form submit, ajax request?
In any case, you should have a URL looking like /MyApp/... in your code.
You can also check which URLs are effectively called by using a debug tool in your browser (ie Firebug for Firefox)
Another test to do if you use a Tomcat embedded in Eclipse is to start your Tomcat outside from your IDE, just to check the potential behaviour differences.
I was trying to add the PDT,
Indigo - http://download.eclipse.org/releases/indigo
Unable to read repository at http://download.eclipse.org/releases/indigo.
Unable to read repository at http://download.eclipse.org/releases/indigo.
http://download.eclipse.org/releases/indigo is not a valid repository location.
So what's the correct url ? I went and looked lots of places. Can someone point me to the exact link ?
Edit :
Problem once you go to http://download.eclipse.org/releases/indigo , you will see the below error. So I guess its moved somewhere.
This software repository URL, http://download.eclipse.org/releases/indigo/ , provides access to the software repository for the Eclipse indigo release. Until its released in June 2011, it will contain milestone builds.
The repository site URL is typically pre-populated in the list of software repositories when you install the Eclipse Platform or SDK.
For more information about installing or updating software, see the Eclipse Platform Help.
There is also a collection of handy, downloadable all-in-one zip files available for many interests and platforms. Many people find these all-in-one packages the easiest way to get started.
Can you connect to internet at all through Eclipse?
Open the internal webbrowser. In Eclipse: Window -> show view -> Other -> General: Internal web browser.
Look up any normal adress, is it working?
Can you connect to another update site? Try for example Eclipse Emma:
http://update.eclemma.org/
Do you see anything there?
What are your proxy preferences? Go to Window -> preferences -> General: Network connections.
The active provider:
Specifies the settings profile to be used when opening connections. Choosing the Direct provider causes all the connections to be opened without the use of a proxy server. Selecting Manual causes settings defined in Eclipse to be used. On some platforms there is also a Native provider available, selecting this one causes settings that were discovered in the OS to be used.
If internet is working fine outside of Eclipse, try changing to Native. After that, try Direct.
I have encountered problems where an update site would not load, then I had to remove it and add it again. This forces Eclipse to reread the contents of the site even if it has a cached copy. So, if you still get no connection to the indigo update site, but everything else is working, try that. Go to Window -> Preferences -> Install/update: Available Software sites. Then remove and add the indigo site. Just remember to copy the adress so you can add it again.
As suggested in a comment below by #lostiniceland, this is a simpler way to achieve the above:
Goto Window -> Preferences -> Install Update -> Available Software Sites => select the entry and click the "Reload" button to the right. This is sometimes also helpful when you have a local updatesite for testing custom plugins
I had the same problem and resolved it by
Deleting the cache directory \eclipse\p2\org.eclipse.equinox.p2.repository\cache
Refreshing the repositories.
Preferences -> Install Update -> Available Software Sites => select the entry
Click the "Reload"
Check if you are able to connect to eclipse market place url (http://marketplace.eclipse.org/) from browser. If its working then the issue is because of proxy server using in your network.
We have to update eclipse with proxy server details used in our network.
Go to :- Windows-> Preference -> General -> Network Connections.
And edit HTTP ,with proxy details.
Click OK
Done.
I was having this problem and it turned out to be our firewall. It has some very general functions for blocking ActiveX, Java, etc., and the Java functionality was blocking the jar downloads as Eclipse attempted them.
The firewall was returning an html page explaining that the content was blocked, which of course went unseen. Thank goodness for Wireshark :)
Another way to solve this kind of error is to start eclipse with this argument
-vmargs -Djava.net.preferIPv4Stack=true
Working fine with Eclipse (x64) 4.3.1
Had this problem in Linux, and I found that the user doesn't have permission to update the eclipse directory
change the owner of eclipse folder recursively, or run eclipse with user who has write permission to the folder
In Windows 7 32-bit version, I started the eclipse with as an administrator. This worked for me.
I had the same problem. Try to deactivate your Firewall (I had avast!), which worked for me.
(Sorry for my English I'm French :D)
Please make sure you are using correct url. If You are using url - http://download.eclipse.org/releases/indigo on your eclipse luna(v4.4) then it might be not working in this case you should use - http://download.eclipse.org/releases/luna
I have tried this and its working.
What worked for me:
Since yesterday, I have been trying to install the Eclipse plugin - "Remote System Explorer" from the Eclipse marketplace on a freshly downloaded Eclipse 4.8 as shown below,
and everytime I was getting this error:
Unable to read repository at http://download.eclipse.org/releases/kepler/.
Unable to read repository at http://download.eclipse.org/releases/kepler/201306260900/content.jar.
download.eclipse.org:80 failed to respond
which brought me to this SO post.
I tried a few solutions mentioned here in the different answers like this one and this one and this one, but none of them worked. I just gave up almost, thinking that either the corporate network here is somehow blocking the specific download requests or the 4.8 version of Eclipse is buggy.
Discovery:
I could not reload all the paths under 'Window' -> 'Preferences' -> 'Install/Update' -> 'Available Software Sites'.
Preconditions:
What did work for me from the beginning was:
I could open google.com from the internal web browser of eclipse and,
some of the update paths, I could reload even. (As was mentioned as a possible solution or test, in some of the answers here, like this one.)
Finally, this answer put me on the right track - for my specific case, at least. Just my step was to do the exact opposite of what that answer was doing.
Solution:
I had to change all the http:\\ paths to https:\\ and suddenly it started to work. I don't know who - either IE/Edge on Windows 10 or the Windows 10 firewall or the company firewall is blocking HTTP communications. But with HTTPS, I can finally install plugins from the Marketplace.
HTTPS reload works
I must say, what is strange is that not all the paths required https. Except a few, the rest seemed to have had no problem working with HTTP. But I anyways changed all to HTTPS, just for good measure.
Then reload all the repositories one by one. Press "Apply and close".
Then check for updates. Eclipse will update itself successfully now.
Restart after update.
Finally you can install whichever Plugin you would like to from the Eclipse Marketplace.
Note: In case during the update, this same error pops up again, then see in the repositories that any new paths added by eclipse during the update, are also HTTPS and not HTTP.
Kudos to #Fredrik above. His answer didn't work for me, but lead me to the resolution of my issue:
In 'Window'|'Preferences'|'Install/Update'|'Available Software Sites'. The location that I was attempting to install from the 'Marketplace' was getting inserted with an https:// URL. Editing this to http:// allowed me to then use 'Help'|Install New Software ...' to select the repository from the drop down 'Work with:' combobox instead of having the https:// one automatically inserted and used.
For eclipse, there are normally different options available:
If you want to use the PHP development environment (only), you should go with the corresponding distro of eclipse. There is a distro for PHP provided by Zend.
You may add PDT to an indigo release by doing the following steps:
Check if an update site for PDT is included in your eclipse installation:
Open the Help > Install New Software dialog.
Click there on the link Available Software Sites.
In the list, the URL http://download.eclipse.org/releases/indigo should be marked.
Close the dialog.
Select from the Work with list the site with the right URL.
Enter in the filter box PDT and search in the list for the PDT tooling you want to install.
Install the PDT tooling.
If that does not work, you may download a complete update site from the PDT project site.
Visit the site (URL above).
Click on downloads.
Search there for the string "all in one update site".
Download the zip file.
Install it in your Indigo installation. Help > Install New Software > Add... > Enter name and select from button Archive the zip file
I hope some of the installation instructions will work for you.
This is the correct URL. Chances are Eclipse cannot read it properly because of the Internet connexion.
Are you using a proxy to get Internet access? If this is the case you need to notify Eclipse via the "Preferences/General/Network Connections" menu.
That URL works fine. The message you report is normal when you look at it in a browser. My copy of Eclipse has no problems talking to it. If yours does, I suspect a proxy configuration error in your copy of eclipse.
Also try it by turning off the firewall, and similar services. It worked for me!
If you can't access https://dl-ssl.google.com/android/eclipse/ simply
try to use http://
instead of https://
I spent whole my day figuring out this and found the following. And it works great now.
This is basically an issue with your gateway or proxy, If you are under proxy network, Please go to the network settings and set the proxy server settings(server, port , user name and password). If you are under direct gateway network, your firewall may be blocking the http get request from your eclipse.
I was also unable to read the repository. Even after the disabling most of the entries under Available Software Sites things were still not working.
I had no proxy to worry about and even disabling the firewall (which I do not recommended) as a last resort did not help.
Viewing the error log, from the dialog box which Eclipse displayed, there was mention of a cache directory under .eclipse in my home directory. I deleted the two cache directories I found and Eclipse was working again.
For my setup the two directories I deleted were:
.eclipse/org.eclipse.platform_4.4.2_119745494_macosx_cocoa_x86_64/p2/org.eclipse.equinox.p2.core/cache
.eclipse/org.eclipse.platform_4.4.2_119745494_macosx_cocoa_x86_64/p2/org.eclipse.equinox.p2.repository/cache
NB: My setup is Eclipse Luna 4.4.2 running on Mac OS X Yosemite 10.10.3
In my case, I discovered that the major issue why my eclipse won't connect to internet is my Internet Service Provider. I was only able to browse some websites but unable to browse other website. Fixing the issue with the ISP worked.
My issue was the Eclipse Marketplace client needed updating.
After trying Fredriks solution of
Go to Window -> Preferences -> Install/update: Available Software sites. Then remove and add the indigo site. Just remember to copy the adress so you can add it again.
The Marketplace client wouldn't load. But I could access it via a browser.
So, I went to the Help -> Eclipse Marketplace
it loaded fine
Clicked on Installed and found the Eclipse Marketplace Client and it had so i clicked it it updated and then when I did the standard update everything worked.
Sometimes, there will be firewalls and restrictions in the network preventing the plugin to get downloaded. We can try some other network. This actually resolved my issue.
I was facing the issue while adding team explorer plugin to eclipse from https://marketplace.eclipse.org/content/team-explorer-everywhere.
Used team explorer plugin for ecplise for internal use of xamarin for mac.
Error:
unable to read repository at http://marketplace.eclipse.org/content/team-explorer-everywhere
org.eclipse.equinox.p2.core.provisionexception unable to read repository
Unknown host exception
Goto https://github.com/microsoft/team-explorer-everywhere/releases
Download: TFSEclipsePlugin-UpdateSiteArchive-14.135.0.zip
From Eclipse->Help->Install new software.
From Add Repository window select Archive select the downloaded zip file.
Continue installation.
Also try if in the eclipse paths there is some duplicated
Luna - http://download.eclipse.org/releases/luna
Luna - http://download.eclipse.org/releases/luna/1234567...
Try both of them, one may work.
In my case, with 2 eclispes installed, in one of them the path
Luna - http://download.eclipse.org/releases/luna
works, in the other one, i must select:
Luna - http://download.eclipse.org/releases/luna/123456...
In both the internal browser can access to internet. Both are Luna (but one is RCM, the other one i don't remember).
No meu caso era o anti-vírus que estava bloqueando a conexão do eclipse, desativei o anti-víruse tudo funcionou o//.
Translation:
In my case it was the anti-virus that was blocking the connection from eclipse. I disabled the anti-virus and everything worked.
I am trying to get the debugger (CF extension for Eclipse) working for last few hours. And struck in strange situation.
My settings are listed below
ColdFusion 8
Eclipse 3.4
I set up the RDS & modified the JVM.config settings and verified the connection & debugger, both returns successful in test run. But When i attach a debugger to the site, breakpoints are not hit.
My Eclipse workbench & site virtual directory pointing to the same path. It is in a remote server.
I left Eclipse-CF mapping blank since both pointing the same remote path.
And i am using WYSE thin client emulator.. does it anything to do with this..?
Can someone help me to resolve this problem?
Cheers
If your eclipse configuration is ok, could be that something is not confgured right on server side. Check if Line Debugger Settings > Allow Line Debugging feature is enabled and that Debugger Port (5005) is opened and accessible form client machine.
Articles that should walk you through proper setup:
http://eclipse.sys-con.com/node/382427
http://www.adobe.com/devnet/coldfusion/articles/debugger.html
Also you could try using CF Builder and/or FusionDebug http://www.fusion-debug.com/fd/ .
You do need to specify at least one mapping. Eclipse needs to know what folder in your project maps to the http root. Even if the mapping is / -> /, you need to specify that. The only time you can leave mapping blank is when the CF server is on the same machine as Eclipse.
I have eclipse with coldfusion builder installed, and I set up the various screens - RDS and coldfusion debug settings in preferences, project properties and set the server up there.
It seems like it is almost working, the RDS screens work, and I can start debugging, but when it hits my breakpoint I get a blank source page that says 'Source not found.' with a button for 'Edit source lookup path'.
If I click the button, it shows my workspace tree, not much I can do with that, but I can add a path so I tried adding a path to the root of my project on the web server. When I ok that, for an instant I see some code appear in the source viewer, then it disappears and I have the source not found message again. If I click edit, my path is not there... ??
I am not sure what fixed it exactly, but I just went through all the different settings screens and re-defined all the debugging paths, etc. and it finally started working.