I have a crystal report like below image:
The report is group by "Quot No.", by default it's ordered by "Times Used" (8th column)
How can I change the ordering so that it will order by "Total amount"?
The total amount is a field in the report which is the sum of a field named "quotamt" in the datasource:
I've tried looking in the change group options, took a look at the "Use a formula as group sort order", but the formula only provides three options (ascending, descending, original order), and is unable to sort by another column
The desired result is:
How can I do that?
What I suggest, rather than doing this task in crystal report, good to done at sqlserver side means database side.
This is simplest suggestion when you have this type of situation.
You can give the condition on sqlserver side too. and get the data order same as you want.
Yes, this can be done in report side, but it take time for this.
Don't use formula as group sort order instead from the dropdown use Specifed Order and in the window specify the order you need
Related
I've made a crosstab in crystal report like below:
However, as you can see, the ordering is weirld (i.e. the correct one should be like below:)
And the ordering is stored in another field called order, I took a look in the crystal report's cross-tab expert sorting option, it doesn't allow me to order by another column, it only allows me to sort either ascending or descending, how can I set the ordering by another column?
Crosstab's sorting is based on the rows order, if you want to sort it in your on you have to add some extra rows and have to suppress subtotal and Label in Customize Style of Crosstab Expert
Example:
If you have 3 rows(A,B,C) to display and you have to sort it in order like B,C,A then you have to add 2 new rows(B,C) now your Crosstab looks like (B,C,A,B,C) now you have to suppress Rows B and C you meet your both requirements for sorting and display order
But This solution have some limitations like
if you want to export the report in Excel then it will add extra cells in grand total.
otherwise you are good to go.
Example:
If you have 3 rows(A,B,C) to display and you added one row and you suppress it to solve your sorting issue then in Excel its grand total looks like
A B C
a 1 3
b 2 2
---------------------------
Total: 3 5
Yes, you can not sort on another column. You must use any of one column as a header.
In Crystal report, sorting happened based on header column's value (That's why you see as per alphabetic).
I also face this issue and how I solved, that I am explain. You have to use a formula which have order, but either hide it or use a value like in this link.
https://scn.sap.com/thread/3341846
Second option as per this link. (I think first you check this)
http://www.codeproject.com/Tips/493334/Custom-sorting-for-Crystal-Report-Cross-Tab
https://scn.sap.com/thread/1172741
open crosstab expert, highlight the column that you want to reorder, go to Group Options and select in specified order. This will open another tab where you will have your available values listed there. Using the arrows on the right side you can move up or down your values and accommodate them in the order you want them to be displayed.
Simple way would be take order column from stored procedure to cross tab and set the order according to that column.
Then supress the order column and reduce the width of that column to minimum pixel so that it doesn't appear in cross tab.
Make the field you want to sort by a group field and hide it. To hide it, in the Crosstab Expert > Customize Style dialog select this group then use the Group Options area to Suppress Subtotal and Supress Label. Worked for me.
Use the order field as the grouping column and change the label for said column to show the actual sizes. The labels can be changed in Crosstab Expert, Grouping Options and then the tab Options.
I have this concern using Crystal Report which I am not really familiar with. Here's my scenario:
I have an existing report to update, I need to add a column (ETA) which has a datetime value. It may return more than one rows per Item No, I need to get the minimum date only per Item No from the result rows.
I already tried some solution mentioned here http://scn.sap.com/thread/1952829 but found no luck.
I used a suppression formula for the Details section of the report, but haven't succeeded yet.
IF {TableName.DateField} = Minimum({TableName.DateField}) THEN FALSE ELSE TRUE
Any possible things you can suggest me to try? Thanks in advance for this :)
good to get this value from sqlserver side. you just create a function which return a single data (minimum date).
If you wish in crystal report side, it is something you make loop of hundred for a single row display. You can use running total field for this.
Select the field , select summary type and put into the detail section.
or you can create a formula with group name option like
Minimum({TableName.DateField})
http://scn.sap.com/thread/1952829
http://businessintelligence.ittoolbox.com/groups/technical-functional/businessobjects-crystal-l/unable-to-filter-based-on-the-first-date-in-list-of-dates-4912881
please check
Running total field gives options for Min, Max, etc. but not Sum
http://flylib.com/books/en/4.229.1.28/1/
We have a report that has one group. The group header is based on a (rather extensive) formula which says if the item number is equal to "AAAAAA" then the header should read one of the following:
Conduit
Metal Flex
Copper Wire
Aluminum Wire
Aluminum SE
SO Cord
SQ D
Breakers
etc.
Currently, the groups are sorted in alphabetical order when the report is run. How can we change this so it prints in the order we want (for example as above)?
On the "Use a Formula as Group Sort Order" formula, it says we can only return the group sort order constants as Ascending, Descending or Original order. I tried Original Order seeing as how the group formula is set up in the order wanted, but it still does it in alpha order.
If you are using the field from database to group then you can use option "Group in Specified order" and there provide the order you want to view.
You can get the option if you go to change group.
In Crystal Reports, I could define a formula that would evaluate for each detail line. For example, if I had a query that would return a PatientId, an ObsTerm name, and an ObsTerm value, I could define a formula called {#Hispanic} that had the value:
If {Command.OBSNAME} = "HISPANIC" Then
{Command.OBSVALUE}
Else
" "
Then, in the group footer, I could take Maximum({#Hispanic}, {Command.PATIENTID}) to see if I had gotten a value returned for the patient's ethnicity - either I'd get the value (assume only one, since that's how I built the query) or a blank.
I'm trying to convert a CR report over to SSRS 2008R2: how would I do the above? Thanks.
Add a calculated field to your data source (called 'Hispanic' or whatever) with a formula of:
=IIF(Fields!OBSNAME.Value="Hispanic",Fields!OBSVALUE.Value,"")
In your report, add a parent group to your detail row and type [Max(Hispanic)] into a field in the group row. You may then want to hide the detail row and show only the aggregate data. I think there's probably a much easier way to do what you want but it's not clear from your question.
I made the transition from Crystal to SSRS and it is a hard road. You need to unlearn all your Crystal (especially formatting).
I have a problem with running Total in Crsystal report9
if their is no values available for a Paticular field how can we return the running total as '0'
Instead of display the Running Total directly in your report create a Formula Field based on the Running Total and drag it into the report.
Your formula should look like this (Crystal Syntax)...
if ISNULL({#RunningTotalField}) then
"0.00"
else
ToText(RunningTotalField, 2)
If there is no data for that particular group, then Crystal won't show it easily. Your options are :
1) Use subreports to display the values for a particular group, and keep the main report just looking at the table(s) containing the group headers.
2) Use a stored procedure as the source so you have full control over the SQL that is run.
The problem is that as soon as you use a field to group, Crystal will only return records where that field has been used. If it was simply in the Details section you could modify the link to a LEFT JOIN and it wouldn't matter, but the group forces the INNER JOIN which means the groups without data are not returned.
Unfortunately Running Totals don't show up if there are no records that match your criteria. An alternative is to use a set of formulas calculated in various sections of the report. The technique is widely described in the Crystal literature. For example, this TekTips gives a very succinct overview of your options.
You set up an initialising formula in each header, with the evaluation time directive "WhilePrintingRecords". This approach was the only one available for doing running totals in the "good ol' days" before RunningTotal objects were available.