My current project is growing larger and beginning to span multiple packages. Export and import management is waxing burdensome. My buffer list is filling up with: package.lisp, package.lisp<2>, package.lisp<3>, etc. These are very hard to distinguish when switching buffers with C-x b.
Every time I add a function to a package and wish to export it, the aggravation of hunting down the correct file nearly drives me to HN. I've considered using cl-annot's #export thing, but it feels like going over to the dark side.
Is there a nice way to manage defpackages in emacs? Perhaps a way to jump from the current source file to the relevant defpackage?
If you use slime, "C-c x" will export the symbol at point.
Related
I've spent a whole day on this now. Say I open emacs and press C-c p p to open projectile-switch-project then RET to select a project, emacs opens a new window horizontally (on top of the previous) with the current buffer.
What I need is for projectile to use the already existing window and not open a new one. I've gone through every single line of my config and can figure out what is causing it.
I'd have posted my config but it's split over multiple files which will make it impractical to link to here.
The related packages I can think of which I use are:
projectile,
ivy swiper counsel - trilogy
What I've tried so far is start emacs without loading (ivy swiper counsel) and also I've tried replacing all my projectile code with bare minimum:
(use-package projectile
:ensure t
:init
(projectile-mode +1)
:bind (:map projectile-mode-map
("s-p" . projectile-command-map)
("C-c p" . projectile-command-map)))
which didn't work either.
I'm not expecting any specifics since it's a hand crafted config however I'm hoping for general pointes as to where to look for the possible cause.
I'm researching more to see if i can find a better way for you, but this is what i have so far...
If you want to look around the customization options just type M-x customize. I found a ton of options you can browse through. Projectile was listed under "Convenience" and frames/windows were listed under "Environment". You can also search packages you might be interested in for more customization if you have MELPA installed.
Considering the way that buffers and windows work I don't think you can just replace the content inside the buffer with the content of another file. I think (or at least how I've been using Emacs) you will always open a new buffer to open a file and close old buffers if needed.
From what I was reading, buffers are like interfaces between Emacs and the file you're peering into. It sets up a connection, points to the file, and creates a name for the buffer (usually from the file name unless you change it). Something I find interesting is you can even have multiple buffers open to the same file and as you type on the screen in one buffer the text should show up in the other buffer in real time.
I was reading some documentation on it and I think the command you're looking for is C-x C-f or C-x d, which opens DiredMode. The first one opens your home directory and the second opens the current directory for the file in your selected buffer. This will open a mini-buffer to search through files and when you choose the file it should open the file in a new buffer on top of the buffer you were looking at initially.
Then you can use C-x b to list and move between other buffers that are already open.
Also, M-x projectile-find-file is a command you can use to search files and get the same outcome. I don't have that set to a key-binding so I don't know if there is a default, plus I'm using Spacemacs with evil-mode, so not everything is the same as original Emacs.
Also, maybe look into extension you can get from MELPA like Treemacs
I've recently switched from using Eclipse to emacs. I'm trying to find a way to emulate eclipse's Ctrl-Shft-r functionality which lets you type in a file name and it begins showing all files in the current workspace that begin with the string you are typing.
C-x C-f seems to handle just tab-completion in the current directory, whereas Eclipse's functionality looked through all sub-directories to find matching files.
I'm looking for something (maybe there's a plugin that does this) that allows you to type the name of folder to look in, and then a partial file and returns back the results in a buffer. Possibly that uses auto-complete to list off matching files with their full paths.
First of all, steer clear of vanilla find-file function (that's the interactive function that is run when you hit C-x C-f). It is very limited, it forces you to hit TAB all the time, and the first thing most people do when switching to emacs is replace find-file with something more powefull.
There're a number of alternatives. ido-mode is one, helm is another. The former is light-weight, fast and comes built-in with emacs. The latter is immensely powerful and strives to be fast, too.
Second of all, there're two ways a recursive file search can usually be done:
directory search - that's when you just search a directory, no surprises here;
project search - that's when you setup a project your're working on, thus making emacs aware of which files are of interest to you right now.
For directory search, ido-find-file and helm-find-file are both viable options. Ido does its search automatically when you pause typing; helm uses (C-u) M-g s to activate grep. See this SO question for more info.
For project search, you need a library to manage your projects. Projectile is great for that. Set it up and use C-c p f or C-c p F to list files in current or all of your projects, respectively. Oh, and projectile uses ido by default, but there is helm support, too.
You're looking for projectile which indexes your project's files. I used it for a while but have recently switched to using helm-recentf
(global-set-key "\C-x\ \C-r" 'helm-recentf)
I have recent files set to a large number. Pretty much anything I've ever opened is a few keystrokes away. This even doubles up as a handy way to switch buffers.
(require 'recentf)
(setq recentf-auto-cleanup 'never)
(recentf-mode 1)
(setq recentf-max-saved-items 200)
I'm tinkering about switching my IDE to emacs. (I'm still an emacs newbie.)
The problem is that I customized my IDE quite well and I'd regret to leave my helpers behind.
Let me explain:
Shows the current open files/buffers, allows fast switching with a hotkey (C-1, C-2, ...)
Shows the most recent texts on the "clipboard" or inserted by complete (no. 4), text insertable with a hotkey (C-b 1, C-b 2, ...) Last inserted shown in bold, insertable with C-`
The last inserted complete (no. 4) text, insertable with M-`
Autocomplete-ish list, gathered from all open files, regardless of their type with some magical logic. text insertable with a hotkey (M-1, M-2, ...)
I guess emacs has such features, but I'm a visual type I'd like to see what I have available.
Of course actual hotkeys don't matter much, but as you see having all that info visible makes it easy to hit the spot with the least keypresses.
My pain is that there is a plethora of emacs extensions providing various features, checking all seems to take a lifetime.
My question is:
are there any emacs extensions to achieve similar looks and behavour?
as I'm a programmer, which extensions could I take as a base to assemble something like this?
Thanks!
Elaborating a bit more:
I’m a python dev, so most of the code I’m writing is python. Add some HTML JS CSS XML to the picture.
One important thing is that completion needs to work across filetype boundaries, because python / HTML(template) / XML(config) / doctest identifiers are cross-referenced. It’s a huge pain with some IDEs that completion works only for python filetypes.
I have a lot of same named files but in different folders, like init.py, configure.zcml, etc. It seems to be a pain to switch between those by filename.
Better said that’s a list of recently inserted text. To be reused by the fewest keys as possible. Usually when coding I’m reusing the same identifiers/whatever within the same task. So it’s handy to have them listed instead having to retype the starting x chars to get completion again.
Usually best use of this feature is when changing/refactoring code. Like adding one more extra feature and the identifier is needed several times over the place.
TL;DR
Learn keyboard macros. Learn yasnippet.
Autocomplete mode is probably similar to what you have.
Get acquainted with emacs kill-ring before trying to change it, it wants to be your friend. Then you'll know what to look for when you DO want to change it.
Long Version
Shows the current open files/buffers, allows fast switching with a hotkey (C-1, C-2, ...)
You have three options for this.
My personal preference is to have all source files open at all times. So I don't need a visual list of open buffers. Whenever I want to switch to a file I hit C-= (which I've bound to iswitchb-buffer) and type a couple of unique letters. It's common to constantly switch between the same two buffers so I also bound C-backspace to previous-buffer.
Another option I can recommend is tabbar. It's not exactly like your setup, but it displays a list of open buffers (just like webpages in a browser) and it has functions for cycling through the tabs, so it shouldn't be hard to reproduce your C-number key bindings.
You could use speedbar or ecb. They would be the most similar to your current visual configuration, but I'd argue the other options are more efficient.
Shows the most recent texts on the "clipboard" or inserted by complete (no. 4), text insertable with a hotkey (C-b 1, C-b 2, ...) Last inserted shown in bold, insertable with...
I see you've sort of mixed the clipboard with completion history. When it comes to emacs, yasnippet and autocomplete are just so good you're better off going with them for completion (see below).
Emacs clipboard is called the kill-ring. I'm sure you know of C-y and M-y, so you can always recover anything you've cut in the past. Unfortunately, I don't know of any packages that constantly display the kill ring or allow you to yank a specific part of it (though that shouldn't be too hard to write), but at least you know what to search for (kill-ring).
The last inserted complete (no. 4) text, insertable with M-`
I'll be honest, I don't see that much use in this. If you have to repetitively insert text, you should learn keyboard macros. In fact, you should learn keyboard macros anyway, they're the first reason I got hooked to emacs.
Autocomplete-ish list, gathered from all open files, regardless of their type with some magical logic. text insertable with a hotkey (M-1, M-2, ...)
Emacs had many great completion options. In your case, the best one is probably autocomplete-mode. It pops-up completion options (much like your separate completions window), and I think it allows for quick selection of a specific option (like your M-number shortcuts). Also it has several different ways of deciding which completions to offer you (it calls them "sources") and one of them is to gather from all buffers.
In addition to that you have yasnippet, and I couldn't possibly recommend it enough. Seriously. Learning to use it and writing your own snippets will change the way you write code. You'll become a mage whose fingers produce pages of code flowing through your screen in blazing speeds. Use yasnippet!
Once you have it configured, every 3 or 4 keys you press will generate a line (or more) of code for you.
After all that, if you still miss something from your previous editor you'll write it yourself. :-)
Your setup looks exactly like https://github.com/emacsmirror/ecb.
To me at least, since I don't use side-bars:)
You should take a look at the extension speedbar. I have installed this extension, but I rarely use it even for a very large project.
I've been using emacs for all of my text editing needs for the past three years now. When I'm in a single file, working on code or whatnot, I'm fairly efficient. With two files, I can "C-x b RET" between them and I do fine. However, whenever I need to be working on more than two files at a time, I tend to get lost.
Here are some of the problems that I'd like to work on:
I forget what some of my buffers are called, but I don't understand why C-x C-b splits my window into two buffers and exits the mini buffer. Sure I can switch buffers and choose a buffer to visit, but this feels unintuitive, and leaves me with two buffers open.
When I visit a directory rather than a file, I have a convenient list of all of the files and directories. I usually want to do one of two things with this: 1) Open a single file and never see this buffer again OR 2) Open a bunch of files and never see this buffer again. I don't really know how to do this, as moving the point to a file and hitting return doesn't do either of these things.
I know that my buffers aren't like tabs, but I have an inclination to want to scroll through them to find what I want. I don't know of any key-bindings for this, but I'd like it to be M-n / M-p or the like. Then again, this may be a horribly inefficient way to switch buffers.
When I open interactive help of any kind (for example in ESS), I have a habit of switching back to the buffer I was working in and using C-x 1 to get back to a single buffer. When I do this, however, the help buffer hangs around in my buffer list, further confusing me. I know I can switch to that buffer, kill it, switch back, and then go back to a single buffer, but this seems wrong.
The way I've dealt with this so far involves using a tiling window manager and a few emacs windows in different work-spaces, rather than actually learn the best way to manage a number of files in emacs. I don't necessarily want to change emacs to better fit my needs (although I am open to that if it fits in with what I'm about to say), instead, I'd like to grok the thought process behind handling files/buffers the way that emacs does, and how I can be more efficient with it.
Any answer that would help me understand the correct way, or a more efficient way to manage my buffers or files would be greatly appreciated.
Bind C-x C-b to ibuffer. This is a better buffer listing facility with many advanced features, and its default behaviour is to replace the current buffer with the buffer listing, and then bury the listing when you select a buffer (leaving you with the newly-selected buffer in place of the original one).
You can simply use C-x b to enter your selection in the mini-buffer, of course; however the tab-completion (which is needed to make this a viable option, IMO) does open a new window temporarily, at which point I think you might as well familiarise yourself with something with more features.
Use a instead of RET when selecting from dired. This kills the dired buffer instead of leaving it behind. C-h m in any buffer will show you the help for its major mode (followed by help for the minor modes), and you can read about all the available dired key bindings there.
http://www.emacswiki.org/cgi-bin/wiki/TabBarMode ? (edit: I prefer Rémi's answer for this one, but TabBarMode would give you the visual tab element if you were particularly keen on that.)
q is bound to a 'quit' function in a great many major modes. Generally it buries the buffer rather than killing it, but I certainly find that fine.
To elaborate a little on #1, ibuffer has lots of nice features, and M-x customize-group ibuffer RET will give you some idea of how you can customise it to your liking.
Furthermore, you can filter the buffer list by many criteria (again, use C-h m to see its help page), and then generate a 'group' definition from the current filters, and save your custom filters and groups for future usage.
For example:
/ f ^/var/www/ RET: filter buffer list to show only filenames starting with /var/www/.
/ s Web filters RET: name and save active filter set to your init file.
/ g Web development RET: create a named group from the active filters.
/ S My groups RET: name and save group definitions to your init file.
/ r Web filters RET: invoke the "Web filters" filters.
/ R My groups RET: invoke the "My groups" groups.
RET on a group name to collapse or expand it.
C-k and C-y to kill and yank groups, to re-arrange them.
C-h m for more information...
This way you can have a single Emacs instance running, and create filters and groups for different types of task, and easily switch between them.
I think you will really enjoy Ido for dealing with multiple buffers who's names you can't exactly remember. When you type C-x b it shows a list of open buffers in most used order. As you type some of the characters in a buffer name the list is filtered. The characters you type don't have to be at the begging of the name or contiguous. Using C-f, C-b or left/right arrow keys cycles through the buffer choices.
Also see Smex for Ido like functionality for M-x
Closing windows is done with C-x 0. Intentionally splitting the window is done with C-x 2 for horizontal, C-x 3 for vertical. I love this feature, since it allows me to have test and production code visible at the same time. C-x o takes me to the other window.
I use C-x right (or C-x C-right) and C-x left (or C-x C-right) to go to the next and previous buffer. I don't mind anymore off the few buffer that lay around in Emacs but you could use k in the buffer list to kill the buffer you don't use anymore.
You can also try Iswitchb mode which provides auto-completion for buffer names when you switch buffers via C-x b.
To activate:
M-x iswitchb-mode
Or add to your .emacs file:
(iswitchb-mode)
It is similar to Ido mode for buffer switching but a bit more lightweight.
Also, if you want a more customizable listing of your buffers then use M-x bs-show as an alternative to C-x C-b. In that buffer type ? to get a list of actions you can perform.
I think the number one most useful extension for flipping through buffers is Anything. It lets you start typing part of a buffer (or file!) name and it will figure out what you want. I've rebound C-x b to anything-for-buffers. It makes life so much better.
As always, there are many ways to help you with this; it depends a bit on personal preference what works best, here are some links with explanations:
ibuffer; which is an updated buffer menu (C-x C-b)
ido, which let's you have more powerful autocompletion to switch through buffers. It's a kind-of 'better iswitchb'.
These two are enough for me; but you may also be interested in the tabbar-mode, which gives you rudimentary tabs (like firefox has them).
One of my colleagues uses TextPad, and one feature I found really useful is the Auto-Reload. (The feature has been described in this SO quesion: Alternative to TextPad's Prompt to Reload File). Basically, it keeps reloading the file without any prompt from the user, which is really helpful when monitoring log files that are updated in real-time. Is there something similar available for Emacs? If not, can anyone whip up the required elisp magic?
M-x auto-revert-mode
I should add that for log tails, there is the more specific auto-revert-tail-mode, and that if you like it as a general feature (my case), you can turn on global-auto-revert-mode, to revert all buffers. Beware of remote files in that case.
If you want auto-revert to apply everywhere you can also use global-auto-revert-mode. Add
(global-auto-revert-mode 1)
to your .emacs
Here's my preference, FWIW: I do not use auto-revert. Instead, I bind f5 to this command:
(defun revert-buffer-no-confirm ()
"Revert buffer without confirmation."
(interactive) (revert-buffer t t))
Sounds silly, but that simple change makes all of the difference. This is what f5 does anyway on MS Windows, so it's a habit that works in all applications (on Windows).
Note that I do not change (e.g. remap) any bindings for revert-buffer. I use this only when I explicitly want to revert without confirming (which is quite often, in practice).
HTH.