I cannot find anywhere that it is documented for ember-cli to set a global timeout for QUnit.
I have found the documentation for QUnit:
https://api.qunitjs.com/QUnit.config/
testTimeout (default: undefined)
Type: Number
Specify a global timeout in milliseconds after which all tests will fail with an appropriate message. Useful when async tests aren't finishing, to prevent the testrunner getting stuck. Set to something high, e.g. 30000 (30 seconds) to avoid slow tests to time out by accident.
I was able to change this inside of \node_modules\ember-cli-qunit\vendor\ember-cli-qunit\qunit-configuration.js and this works as expected.
However, we do not check in the node_modules to source control, so changing this value here doesn't really do me any good.
I'm at a loss here on where I'm supposed to make a change to get a global test timeout in ember-cli.
This can be done within the //tests/test-helper.js file.
QUnit.config.testTimeout = 60000;
In tests.index.html
right after the line that says:
<script src="assets/test-support.js"></script>
Add:
<script>
QUnit.config.testTimeout = 6400; // Why not 6400? This is a nice number
</script>
Related
While executing e2e tests in protractor when we are using ignore.synchronization=true/ browser.waitforAngularEnabled(true) to handle waits is too slow when compared to browser.sleep(10000) to proceed to next step. How to address these kind of wait issues to make the script execution faster?
Difference:
ignore.synchronization=true/ browser.waitforAngularEnabled(true) are used to make protractor wait until all the angular modules are loaded.
browser.sleep(// time in ms) is raw way of stopping the protractor for the given particular ms.
Solution:
To handle wait issues:
use browser.waitforAngularEnabled(false) after getting your base url. Then you can use expected waits which makes the protractor wait until that expectation is completed.
Refer https://www.protractortest.org/#/api?view=ProtractorExpectedConditions for more details
Hope it helps you
In Protractor tests I call many times browser.wait method for example to wait once the particular element will appear on the screen or it will be clickable.
In many cases tests passes on my local machine, but does not on other.
I receive very generic information about the timeout which doesn't help me a lot to debug / find a source of issue.
Is it possible to make a browser.wait more verbose, for example:
if at least defaultTimeoutInterval will elapse when waiting for particular element, will it be possible to console.log information about the element that it tried to wait for,
take a screenshot when the timeout error occurs,
provide full call stack when timeout appears in browser.wait
If the main issue is that you don't know for which element the wait timed out, I would suggest writing a helper function for wait and use it instead of wait, something like:
wait = function(variable, variableName,waitingTime){
console.log('Waiting for ' + variableName);
browser.wait(protractor.ExpectedConditions.elementToBeClickable(variablename),waitingTime);
console.log('Success');
}
Because protractor stops executing test after first fail, if wait timed out, console won't print success message after failing to load a certain element.
For screenshots I suggest trying out protractor-jasmine2-screenshot-reporter, it generates an easily readable html report with screenshots and debug information on failed tests (for example, in which code line the failure occured).
Look into using protractor's Expected Condition, you can specify what to wait for and how long to wait for it.
For screenshots there are npm modules out there that can take a screenshot when a test fails. This might help.
browser.wait returns a promise, so catch the error and print/throw something meaningful like:
await browser.wait(ExpectedConditions.visibilityOf(css), waitingTime).catch((error) =>
{
throw new CustomError(`Could not find ${css} ${error.message}`)
});
I am new to writing test cases using protractor for non angular application. I wrote a sample test case.Here the browser closes automatically after running test case.How can I prevent this. Here is my code
var submitBtnElm = $('input[data-behavior=saveContribution]');
it('Should Search', function() {
browser.driver.get('http://localhost/enrollments/osda1.html');
browser.driver.findElement(by.id('contributePercentValue')).sendKeys(50);
submitBtnElm.click().then(function() {
});
});
I was also struggling with a similar issue where i had a test case flow where we were interacting with multiple application and when using Protractor the browser was closing after executing one conf.js file. Now when I looked into the previous response it was like adding delay which depends on how quick your next action i performed or it was hit or miss case. Even if we think from debugging perspective most of the user would be performing overnight runs and they would want to have browser active for couple of hours before they analyze the issue. So I started looking into the protractor base code and came across a generic solution which can circumvent this issue, independent of any browser. Currently the solution is specific to requirement that browser should not close after one conf.js file is executed, then could be improved if someone could add a config parameter asking the user whether they want to close the browser after their run.
The browser could be reused for future conf.js file run by using tag --seleniumSessionId in command line.
Solution:
Go to ..\AppData\Roaming\npm\node_modules\protractor\built where your
protractor is installed.
Open driverProvider.js file and go to function quitDriver
Replace return driver.quit() by return 0
As far as my current usage there seems to be no side effect of the code change, will update if I came across any other issue due to this change. Snapshot of code snippet below.
Thanks
Gleeson
Snapshot of code snippet:
Add browser.pause() at the end of your it function. Within the function itself.
I found Gleeson's solution is working, and that really helped me. The solution was...
Go to %APPDATA%Roaming\npm\node_modules\protractor\built\driverProviders\
Find driverProviders.js
Open it in notepad or any other text editor
Find and Replace return driver.Quit() to return 0
Save the file
Restart your tests after that.
I am using
node v8.12.0
npm v6.4.1
protractor v5.4.1
This solution will work, only if you installed npm or protractor globally; if you have installed your npm or protractor locally (in your folder) then, you have to go to your local protractor folder and do the same.
I suggest you to use browser.driver.sleep(500); before your click operation.
See this.
browser.driver.sleep(500);
element(by.css('your button')).click();
browser.driver.sleep(500);
Add a callback function in It block and the browser window doesn't close until you call it.
So perform the action that you need and place the callback at your convenience
var submitBtnElm = $('input[data-behavior=saveContribution]');
it('Should Search', function(callback) {
browser.driver.get('http://localhost/enrollments/osda1.html');
browser.driver.findElement(by.id('contributePercentValue')).sendKeys(50);
submitBtnElm.click().then(function() {
// Have all the logic you need
// Then invoke callback
callback();
});
});
The best way to make browser NOT to close for some time, Use browser.wait(). Inside the wait function write logic for checking either visibilityOf() or invisibilityOf() of an element, which is not visible or it will take time to become invisible on UI. In this case wait() keep on checking the logic until either condition met or timeout reached. You can increase the timeout if you want browser visible more time.
var EC=protractor.ExpectedConditions;
var submitBtnElm = $('input[data-behavior=saveContribution]');
it('Should Search', function() {
browser.driver.get('http://localhost/enrollments/osda1.html');
browser.driver.findElement(by.id('contributePercentValue')).sendKeys(50);
submitBtnElm.click().then(function() {
browser.wait(function(){
EC.invisibilityOf(submitBtnElm).call().then(function(isPresent){
if(isPresent){
return true;
}
});
},20000,'error message');
});
});
I'm sure there is a change triggered on your page by the button click. It might be something as subtle as a class change on an element or as obvious as a <p></p> element with the text "Saved" displayed. What I would do is, after the test, explicitly wait for this change.
[...]
return protractor.browser.wait(function() {
return element(by.cssContainingText('p', 'Saved')).isPresent();
}, 10000);
You could add such a wait mechanism to the afterEach() method of your spec file, so that your tests are separated even without the Protractor Angular implicit waits.
var submitBtnElm = $('input[data-behavior=saveContribution]');
it('Should Search', function() {
browser.driver.get('http://localhost/enrollments/osda1.html');
browser.driver.findElement(by.id('contributePercentValue')).sendKeys(50);
submitBtnElm.click().then(function() {
});
browser.pause(); // it should leave browser alive after test
});
browser.pause() should leave browser alive until you let it go.
#Edit Another approach is to set browser.ignoreSynchronization = true before browser.get(...). Protractor wouldn't wait for Angular loaded and you could use usual element(...) syntax.
Protractor will close browsers, that it created, so an approach that I am using is to start the browser via the webdriver-reuse-session npm package.
DISCLAIMER: I am the author of this package
It is a new package, so let me know if it solves your problem. I am using it with great success.
The first handler listens some channel of messages and if there is an incoming message, it sets interval:
toggleFlagInterval = setInterval (-> toggleFlag), 500
Messages can be arbitrarily much, but I need to set only one interval.
Second handler reads the message and in it I want to remove the interval:
clearInterval toggleFlagInterval
I want to control that was always zero or one interval .
To do this, I need to find all set intervals.
How to find all set intervals using CoffeeScript?
I would be very grateful for your help.
Thanks to all.
That doesn't make sense. You cannot find all functions registered with setInterval, with or without CoffeeScript (that would be a JavaScript question, it has nothing to do with CoffeeScript). You just need to keep track of them yourself.
It seems like in this specific case, you simply need to choose to conditionally not set an interval, if one is already set.
To do so, your setting code would use ?=:
toggleFlagInterval ?= setInterval (-> toggleFlag), 500
And your clearing code would reset toggleFlagInterval to null:
clearInterval toggleFlagInterval
toggleFlagInterval = null
Alternatively, you need to cancel any already set interval at the point when you set a new one:
clearInterval(toggleFlagInterval) if toggleFlagInterval?
toggleFlagInterval = setInterval (-> toggleFlag), 500
is there anyway to set request time-out while sending message from initiator ??
we had a issue where we got late reply from acceptor and application went in not responsive mode. issue can be with network delay or etc. but I think it will be good if we can set time-out option here.
Seeing with Application call back didn't find anything .
I want to set time-out option with SendToTarget API,,
any suggestion
Did you add CheckLatency and MaxLatency in your config file and confirmed ?
CheckLatency If set to Y, messages must be received from the counterparty within a defined number of seconds (see MaxLatency). It is useful to turn this off if a system uses localtime for it's timestamps instead of GMT.
MaxLatency If CheckLatency is set to Y, this defines the number of seconds latency allowed for a message to be processed. Default is 120. positive integer
I'm experiencing the same problem using QuickFix /n
Looking at the source code for version 1.4 the section that reads those settings from the configuration file is commented out and replaced with hard coded default values.
// FIXME to get from config if available
session.MaxLatency = 120;
session.CheckLatency = true;