I'm looking for a function that will generate random values between 0 and 1, inclusive. I have generated 120,000 random values by using rand() function in octave, but haven't once got the values 0 or 1 as output. Does rand() ever produce such values? If not, is there any other function I can use to achieve the desired result?
If you read the documentation of rand in both Octave and MATLAB, it is an open interval between (0,1), so no, it shouldn't generate the numbers 0 or 1.
However, you can perhaps generate a set of random integers, then normalize the values so that they lie between [0,1]. So perhaps use something like randi (MATLAB docs, Octave docs) where it generates integer values from 1 up to a given maximum. With this, define this maximum number, then subtract by 1 and divide by this offset maximum to get values between [0,1] inclusive:
max_num = 10000; %// Define maximum number
N = 1000; %// Define size of vector
out = (randi(max_num, N, 1) - 1) / (max_num - 1); %// Output
If you want this to act more like rand but including 0 and 1, make the max_num variable quite large.
Mathematically, if you sample from a (continuous) uniform distribution on the closed interval [0 1], values 0 and 1 (or any value, in fact) have probability strictly zero.
Programmatically,
If you have a random generator that produces values of type double on the closed interval [0 1], the probability of getting the value 0, or 1, is not zero, but it's so small it can be neglected.
If the random generator produces values from the open interval (0, 1), the probability of getting a value 0, or 1, is strictly zero.
So the probability is either strictly zero or so small it can be neglected. Therefore, you shouldn't worry about that: in either case the probability is zero for practical purposes. Even if rand were of type (1) above, and thus could produce 0 and 1, it would produce them with probability so small that you would "never" see those values.
Does that sound strange? Well, that happens with any number. You "never" see rand ever outputting exactly 1/4, either. There are so many possible outputs, all of them equally likely, that the probability of any given output is virtually zero.
rand produces numbers from the open interval (0,1), which does not include 0 or 1, so you should never get those values.. This was more clearly documented in previous versions, but it's still stated in the help text for rand (type help rand rather than doc rand).
However, since it produces doubles, there are only a finite number of values that it will actually produce. The precise set varies depending on the RNG algorithm used. For Mersenne twister, the default algorithm, the possible values are all multiples of 2^(-53), within the open interval (0,1). (See doc RandStream.list, and then "Choosing a Random Number Generator" for info on other generators).
Note that 2^(-53) is eps/2. Therefore, it's equivalent to drawing from the closed interval [2^(-53), 1-2^(-53)], or [eps/2, 1-eps/2].
You can scale this interval to [0,1] by subtracting eps/2 and dividing by 1-eps. (Use format hex to display enough precision to check that at the bit level).
So x = (rand-eps/2)/(1-eps) should give you values on the closed interval [0,1].
But I should give a word of caution: they've put a lot of effort into making sure that output of rand gives an appropriate distribution of any given double within (0,1), and I don't think you're going to get the same nice properties on [0,1] if you apply the scaling I suggested. My knowledge of floating-point math and RNGs isn't up to explaining why, or what you might do about that.
I just tried this:
octave:1> max(rand(10000000,1))
ans = 1.00000
octave:2> min(rand(10000000,1))
ans = 3.3788e-08
Did not give me 0 strictly, so watch out for floating point operations.
Edit
Even though I said, watch out for floating point operations I did fall for that. As #eigenchris pointed out:
format long g
octave:1> a=max(rand(1000000,1))
a = 0.999999711020176
It yields a floating number close to one, not equal, as you can see now after changing the precision, as #rayryeng suggested.
Although not direct to the question here, I find it helpful to link to this SO post Octave - random generate number that has a one liner to generate 1s and 0s using r = rand > 0.5.
Related
I am using Matlab's exprnd() to generate random exponential numbers from an exponential distribution with a certain x.From what i understand this returns values using the distribution's probability density function which for a cerain lambda has max value of that lambda.
So for exprnd(5) i excpect values <=5.However this gives greater values than 5(up to 20+).What am i missing here? Could someone please explain?
What the input parameter is, is the mean value of what the exprnd() function's distribution would be. So you can still get values larger than 5.
You should read the help document of exprnd in https://se.mathworks.com/help/stats/exprnd.html
r = exprnd(mu) generates a random number from the exponential
distribution with mean mu.
For you case, exprnd(5) means that your mean value for generated random variables should be 5, which doesn't mean 5 is the upper limit of random variables. For example:
>> exprnd(5,20,1)
ans =
4.10770701
0.60208519
7.25872556
0.05434071
1.56567225
1.25327626
2.27920247
13.76730426
2.26669862
8.16033821
2.65390762
2.59892165
2.68864424
2.20960785
3.64418947
0.00052336
4.78444353
0.70408921
2.20180562
19.10507978
When you have sufficiently large number of random variables, then the mean would approach 5, i.e.,
>> mean(exprnd(5,1e5,1))
ans = 5.0052
How can one create an integer random number with Normal distribution in an interval in Matlab? Could anyone provide an answer?
I know how to create a random number ,say y, with Normal distribution:
std = 5;
mean = 500;
y = std.*randn + mean;
But it is not an integer number and also it is not in a specific interval
If you want integers, you can use randn and round the numbers. However, your second question is kind of weird.
Normal distribution does not have a definite interval. You can only define a "confidence interval" around the mean. For example, 99.7% of the distribution is contained within 3 standard deviations from the mean. But it does not mean that you have a strict interval, it means probability of seeing a number beyond 3xStandard deviations is just too low. Let's say I generated 10000 numbers with mean=100 and std.deviation=10 and rounded them. Then I expect to see numbers between 70 and 130. There might be numbers beyond this interval, but their frequencies(~probabilities) will be low.
mu=100; sigma=10; figure,hist(round(normrnd(mu,sigma,10000,1)),100)
Choose the number from a binomial(N, 0.5) distribution for large N. This will yield something that is as close as you might be able to get to a "normal distribution of integers". The mean will be N/2 and the std deviation N/4. Subtract N/2 to center it about 0.
Say N = 100. Then to generate a sample, you could do:
k = sum(randi(2, [100,1]) - 1);
or:
k = sum(rand(100,1) < 0.5);
You could use randn and convert to integer by rounding the output number. Repeat until the number is in range [a,b] you are interested in.
It will likely work fine for wide enough range around the middle, but you will be doing tons of attempts when you want to look at a narrow part of the tail.
Other option is to get any integer from whatever range with equal probability and convert that to gaussian-like in your range. Say numbers 0->10 would become a, 11-50 would be a+1 ... maxint-10:maxint would be b.
Didn't know how to paraphrase the question well.
Function for example:
Data:https://www.dropbox.com/s/wr61qyhhf6ujvny/data.mat?dl=0
In this case how do I calculate that the rest point of this function is ~1? I have access to the vector that makes the plot.
I guess the mean is an approximation but in some cases it can be pretty bad.
Under the assumption that the "rest" point is the steady-state value in your data and the fact that the steady-state value happens the majority of the times in your data, you can simply bin all of the points and use each unique value as a separate bin. The bin with the highest count should correspond to the steady-state value.
You can do this by a combination of histc and unique. Assuming your data is stored in y, do this:
%// Find all unique values in your data
bins = unique(y);
%// Find the total number of occurrences per unique value
counts = histc(y, bins);
%// Figure out which bin has the largest count
[~,max_bin] = max(counts);
%// Figure out the corresponding y value
ss_value = bins(max_bin);
ss_value contains the steady-state value of your data, corresponding to the most occurring output point with the assumptions I laid out above.
A minor caveat with the above approach is that this is not friendly to floating point data whose unique values are generated by floating point values whose decimal values beyond the first few significant digits are different.
Here's an example of your data from point 2300 to 2320:
>> format long g;
>> y(2300:2320)
ans =
0.99995724232555
0.999957488454868
0.999957733165346
0.999957976465197
0.999958218362579
0.999958458865564
0.999958697982251
0.999958935720613
0.999959172088623
0.999959407094224
0.999959640745246
0.999959873049548
0.999960104014889
0.999960333649014
0.999960561959611
0.999960788954326
0.99996101464076
0.999961239026462
0.999961462118947
0.999961683925704
0.999961904454139
Therefore, what I'd recommend is to perhaps round so that the first 5 or so significant digits are maintained.
You can do this to your dataset before you continue:
num_digits = 5;
y_round = round(y*(10^num_digits))/(10^num_digits);
This will first multiply by 10^n where n is the number of digits you desire so that the decimal point is shifted over by n positions. We round this result, then divide by 10^n to bring it back to the scale that it was before. If you do this, for those points that were 0.9999... where there are n decimal places, these will get rounded to 1, and it may help in the above calculations.
However, more recent versions of MATLAB have this functionality already built-in to round, and you can just do this:
num_digits = 5;
y_round = round(y,num_digits);
Minor Note
More recent versions of MATLAB discourage the use of histc and recommend you use histcounts instead. Same function definition and expected inputs and outputs... so just replace histc with histcounts if your MATLAB version can handle it.
Using the above logic, you could also use the median too. If the majority of data is fluctuating around 1, then the median would have a high probability that the steady-state value is chosen... so try this too:
ss_value = median(y_round);
I need some help on how to generate odd random numbers using Matlab. How do you generate odd random numbers within a given interval, say between 1 and 100?
Well, if I could generate EVEN random numbers within an interval, then I'd just add 1. :)
That is not as silly as it sounds.
Can you generate random integers? If you could, why not multiply by 2? Then you would have EVEN random integers. See above for what to do next.
There are tools in MATLAB to generate random integers in an interval. If not, then you could write your own trivially enough. For example, what does this do:
r = 1 + 2*floor(rand(N,1)*50);
Or this:
r = 1 + 2*randi([0 49], N,1);
Note that Rody edited this answer, but made a mistake when he did so when using randi. I've corrected the problem. Note that randi intentionally goes up to only 49 in its sampling as I have changed it. That works because 2*49 + 1 = 99.
So how about in the rand case? Why have I multiplied by 50 there, and not 49? This is taken from the doc for rand:
"r = rand(n) returns an n-by-n matrix containing pseudorandom values drawn from the standard uniform distribution on the open interval (0,1)."
So rand NEVER generates an exact 1. It can generate a number slightly smaller than 1, but never 1. So when I multiply by 50, this results in a number that is never exactly 50, but only potentially slightly less than 50. The floor then generates all integers between 0 and 49, with essentially equal probability. I suppose someone will point out that since 0 is never a possible result from rand, that the integer 0 will be under-sampled by this expression by an amount of the order of eps. If you will generate that many samples that you can see this extent of undersampling, then you will need a bigger, faster computer to do your work. :)
I need to generate random numbers with following properties.
Min must be 1
Max must be 9
Average (mean) is 6.00 (or something else)
Random number must be Integer (positive) only
I have tried several syntaxes but nothing works, for example
r=1+8.*rand(100,1);
This gives me a random number between 1-9 but it's not an integer (for example 5.607 or 4.391) and each time I calculate the mean it varies.
You may be able to define a function that satisfies your requirements based on Matlab's randi function. But be careful, it is easy to define functions of random number generators which do not produce random numbers.
Another approach might suit -- create a probability distribution to meet your requirements. In this case you need a vector of 9 floating-point numbers which sum to 1 and which, individually, express the probability of the i-th integer occurring. For example, a distribution might be described by the following vector:
[0.1 0.1 0.1 0.1 0.2 0.1 0.1 0.1 0.1]
These split the interval [0,1] into 9 parts. Then, take your favourite rng which generates floating-point numbers in the range [0,1) and generate a number, suppose it is 0.45. Read along the interval from 0 to 1 and you find that this is in the 5-th interval, so return the integer 5.
Obviously, I've been too lazy to give you a vector which gives 6 as the mean of the distribution, but that shouldn't be too hard for you to figure out.
Here is an algorithm with a loop to reach a required mean xmean (with required precision xeps) by regenerating a random number from one half of a vector to another according to mean at current iteration. With my tests it reached the mean pretty quick.
n = 100;
xmean = 6;
xmin = 1;
xmax = 9;
xeps = 0.01;
x = randi([xmin xmax],n,1);
while abs(xmean - mean(x)) >= xeps
if xmean > mean(x)
x(find(x < xmean,1)) = randi([xmean xmax]);
elseif xmean < mean(x)
x(find(x > xmean,1)) = randi([xmin xmean]);
end
end
x is the output you need.
You can use randi to get random integers
You could use floor to truncate your random numbers to integer values only:
r = 1 + floor(9 * rand(100,1));
Obtaining a specified mean is a little trickier; it depends what kind of distribution you're after.
If the distribution is not important and all you're interested in is the mean, then there's a particularly simple function that does that:
function x=myrand
x=6;
end
Before you can design your random number generator you need to specify the distribution it should draw from. You've only partially done that: i.e., you specified it draws from integers in [1,9] and that it has a mean that you want to be able to specify. That still leaves an infinity of distributions to chose among. What other properties do you want your distribution to have?
Edit following comment: The mean of any finite sample from a probability distribution - the so-called sample mean - will only approximate the distribution's mean. There is no way around that.
That having been said, the simplest (in the maximum entropy sense) distribution over the integers in the domain [1,9] is the exponential distribution: i.e.,
p = #(n,x)(exp(-x*n)./sum(exp(-x*(1:9))));
The parameter x determines the distribution mean. The corresponding cumulative distribution is
c = cumsum(p(1:9,x));
To draw from the distribution p you can draw a random number from [0,1] and find what sub-interval of c it falls in: i.e.,
samp = arrayfun(#(y)find(y<c,1),rand(n,m));
will return an [n,m] array of integers drawn from p.