Please, advice on how to set the public IP address/domain name for a web page to be forwarded to a specific server machine on a subnet (say, 192.168.1.77). Can this be done via Mikrotik GUI interface?
An outside IP or assigned domain do not do this automatically, Mikrotik doesn't pick up the server behind a subnet if one does not set the path to it. I've seen a couple of tutorials assigning a server IP address in Mikrotik terminal with "masquerade" command but wonder if this can be done via Mikrotik Webfig GUI.
You need 2 things:
dst-nat to WEBserver
Default route on WEBserver set to Mikroitk
/ip firewall nat add chain=dstnat dst-address=PUBL.IC.I.P dst-port=80 or 443 action=dst-nat to-addresses=192.168.1.77
You must disbale /ip service www and www-ssl for using port 80 or 443
If Mikrotik isn't default route to internet for WEBserver say to me and I will explain how to do
For testing if it's working, you must test by other connectiont outside your LAN ( maybe smartphone without wifi)
Related
I need help port forwarding my webserver from my local ip to external ip.
I have already tried setting up rules in my router for port 8080 (this is the current port for local ip as well (http://localhost:8080)) (Image Attached)
I am using Huawei Router: HG8145V5
I cannot access the webpage from my external ip it shows site cant be reached took too long to respond.
I'm sure its something wrong or extra needed with the port forwarding but cannot find out why.
The webpage is running on apache2.
Port Forward Rules
Webpage Running on 192.168.1.13:8080
I just found out i needed to unable dmz in forwarding rules to enable networking port forwards.
I am trying to access my local [WAMP] webserver from any remote devide. I am so far able to access it from a device inside the LAN, but fail to do so from outside it. As far as i know, port forwarding is how we achieve this. But currently unable to do that correctly.
Present error when trying to connect :
Some of the articles which i have followed so far are:
general-port-forwarding-guide
how-can-i-access-my-server-from-outside-of-my-lan
how-to-expose-a-local-development-server-to-the-internet
The main steps which i follow are as follows:
Make sure server is accessible inside LAN.
Open router's port forwarding settings and port forward the set static ip address (in step 1). Set port 80 and 8080 for communicating.
Access the server via my public ip (can check public ip and if forwarded port is accessible from here)
This is a temporary solution for testing purposes only with 8 hour server connection duration time limit (and a limited no. of server connections):
access_local_server_remotely_for-Development-And-Testing-Only and here is a video guide about how to use it.
I'm trying to implement a web server on my pc, connected to router.
Since my PC is connected to router, It identifies private IP address, starting with
192.168...
However,it could not accept any clients that is not connected to the same router, even I specified tried with public IP address.
Is it possible to implement Web server that can be accept clients from anywhere with my PC connected to local router?
Or should I connect my web server directly to public IP directly without router?
It'll be pleasure to learn from your answers.
The problem may be, that your web server routing may not be configured correctly to your external IP, or your web server ports may be blocked, or another possibility is that your firewall is blocking your service connections outside the local network.
So, a solution to misconfiguration would be, to forward your port to your internal IP of the web server from your router menu.
And, for the case of firewall blocking, you may give special access to your web server through the firewall by setting inbound and outbound rules.
And if all that is correct then most probably your ISP(Internet Service Provider) is not allowing ports to be opened to you, maybe due to dynamic IP or service restrictions.
For the similar problem, you may refer to my answer to another post Here
What router do you have? go into the router using a web browser, mine is 192.168.0.1 with username and password as admin. or username admin, password blank.
Then set a dmz route or for port forwarding 80 to you own internal IP address.
I am having problems connecting to my website from a source outside my local network. I had another server before running the same site. The only difference is the old one was FreeBSD and now I'm trying it on Linux.
Here is my setup: I'm using Apache2. The server is behind a Netgear router. I'm using a Freedns host name. I have ddclient updating my ip.
Here is what happens: I can look at my site from the server in Chrome or my phone connected to the local wifi. It works using either the host name or ip address. It does not load from my cell phone or from my desktop using a proxy for either the host name or the ip address (the external one from googling my ip and from the router's wan info page). When I try the proxy with the host name I get "conection timed out" error, and when I try the ip address I get "couldn't connect to host error".
Here is what I've tried: I enabled port forwarding to the server from and to port 80 to my lan ip address. I disabled the firewall on the server. I double checked that the host name is directed to the right ip address. I ensured that the ip address does indeed point to my router. I've watched wireshark on my server while trying to connect and don't see any incoming requests when I try to load it from my phone.
It seems like maybe my port forwarding isn't working, but on my router it says that that port forwarding rule is active.
I'm out of ideas as to why what else could be going wrong.
I have a web server running out of my home. I have assigned it an address such as 192.168.1.123 on port 80.
I understand that this is running on my local network. If I go to another computer on my network and type in the server's ip address, I can see the server.
Is there a way to access this server from outside my LAN?
Yes, you need to set your router to forward connections to port 80 to your internal IP address (192.168.1.123). Look for Port Forwarding on your router admin screen which I would imagine you access by going to http://192.168.1.1
Keep in mind that your ISP may block port 80 completely in which case you can run your web server on a different port (for example por 8180) and have your router forward connections to port 8180 to your internal IP.
To access your server from outside, you just need to point your browser to your external IP address which you can find out by going to http://www.ipchicken.com
Assuming you have a connection to the internet:
https://github.com/progrium/localtunnel
is a quick way to access your local server from the internet. There might be similar implementations in other languages/platforms. This is just the one I know about.
Remember that security issues need to be carefully considered when opening your local network to the world.
If you use a PHP Webserver you can set it this way:
php -S <YourIPAdresse>:<SomePortNumber> <StartPHPpage>
Example: „php -S 192.168.1.123:9000 index.php"